Hello
I was continuing some network performance tests and I tried out the
Realtek RTL8139 (100Mb/s) card to compare how it behaved when running
a re(4) Q35 Qemu vm running OpenBSD amd64 as opposed to re(4) card
attached to a a i440fx Qemu Vm
basically a re(4) card did not function when attached to a Q35 vm
with repeated messages such as
re0: watchdog timeout and the card did not function.
on the i440fx machine OpenBSD vm functioned and performed in line
with a standard 100Mb/s card expectations performance results are
shown below
Hypervisor ,"Proxmox 6.0 running QEMU 4.0 Linux nve3 5.0.15-1-pve #1
SMP PVE 5.0.15-1 (Wed, 03 Jul 2019 10:51:57 +0200) x86_64
GNU/Linux",,,,,,,
VM setup,2 each running with 2 cores on 1 Socket VM with 2GB ram
assigned with host CPU passed through in KVM Machine type is
i440fx,,,,,,,
OpenBSD amd64 Current as of 20190802 ,,,,,,,,
Centos 7x86_64 Minimal 1810 Release,,,,,,,,
Tests are Iperf3 with default settings Unidirectional TCP ,,,,,,,,
realtek,Realtek RTL8139 nics connected to a linux bridge on the host ,,,,,,,
----------------------------BEGIN-CSV
Results-----------------------------------------------------
Firewall Status ,PF Enabled,PF Enabled,PF Enabled,N/A,PF Disabled ,PF
Disabled ,PF Disabled ,
Test,OpenBSD->Centos,Centos->Openbsd,OpenBSD-OpenBSD,Centos-Centos,OpenBSD->Centos,Centos->Openbsd,OpenBSD-OpenBSD,
1,227,112,309,248,248,116,298,
2,264,119,308,214,283,121,286,
3,274,119,291,175,318,121,305,
4,252,116,308,188,258,120,294,
5,276,115,314,225,287,118,295,
6,270,116,298,200,284,120,307,
7,212,116,291,240,269,119,285,
8,221,115,285,173,288,117,294,
9,295,113,293,177,275,117,341,
10,311,117,307,179,250,117,318,
AVG,260.2,115.8,300.4,201.9,276,118.6,302.3,
STD
DEV,32.26900818,2.250925735,9.957688264,28.19948778,21.01851036,1.837873167,16.82623613,
-----,-----,-----,-----,-----,-----,-----,-----,
-------------------------------------------END CSV
Results-----------------------------------------------
there were no results for the Q35 as the re(4) card would not even
ping (arp incomplete)
and repeated watchdog timeout messages
dmesg & pcidump of re(4) on an i440fx box
dmesg
OpenBSD 6.5-current (GENERIC.MP) #2: Fri Aug 2 22:33:13 IST 2019
fireman@obsdcur20190730.ogmaconnect:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4278038528 (4079MB)
avail mem = 4138225664 (3946MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf5920 (10 entries)
bios0: vendor SeaBIOS version
"rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org" date 04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP APIC SSDT HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz, 462.92 MHz, 06-3e-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,FSGSBASE,TSC_ADJUST,SMEP,ERMS,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,ARAT,XSAVEOPT,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 1000MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz, 250.82 MHz, 06-3e-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,FSGSBASE,TSC_ADJUST,SMEP,ERMS,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,ARAT,XSAVEOPT,MELTDOWN
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0: _OSC failed
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"ACPI0010" at acpi0 not configured
"QEMUVGID" at acpi0 not configured
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: KVM
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
virtio0 at pci0 dev 5 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio0: qsize 128
scsibus2 at vioscsi0: 255 targets
sd0 at scsibus2 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+> SCSI3 0/direct fixed
sd0: 24576MB, 512 bytes/sector, 50331648 sectors, thin
virtio0: msix shared
re0 at pci0 dev 18 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 0 int 10, address 1e:e3:76:f8:a1:2f
rlphy0 at re0 phy 0: RTL internal PHY
ppb0 at pci0 dev 30 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 31 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (fb044f9fda06d052.a) swap on sd0b dump on sd0b
fd0 at fdc0 drive 1: density unknown
obsdcur20190802# pcidump
Domain /dev/pci0:
0:0:0: Intel 82441FX
0:1:0: Intel 82371SB ISA
0:1:1: Intel 82371SB IDE
0:1:2: Intel 82371SB USB
0:1:3: Intel 82371AB Power
0:2:0: Bochs VGA
0:5:0: Qumranet Virtio SCSI
0:18:0: Realtek 8139
0:30:0: Red Hat Qemu PCI-PCI
0:31:0: Red Hat Qemu PCI-PCI
obsdcur20190802# pcidump -v 0:18:0
0:18:0: Realtek 8139
0x0000: Vendor ID: 10ec, Product ID: 8139
0x0004: Command: 0107, Status: 0000
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 20
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x0000e000/0x0100
0x0014: BAR mem 32bit addr: 0xfea52000/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1af4 Product ID: 1100
0x0030: Expansion ROM Base Address: fea00000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
-------------------------------------------------------------
dmesg & pcidump of re(4) attached to Q35
OpenBSD 6.5-current (GENERIC.MP) #2: Fri Aug 2 22:33:13 IST 2019
fireman@obsdcur20190730.ogmaconnect:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4278140928 (4079MB)
avail mem = 4138323968 (3946MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf5900 (10 entries)
bios0: vendor SeaBIOS version
"rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org" date 04/01/2014
bios0: QEMU Standard PC (Q35 + ICH9, 2009)
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET MCFG
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz, 101.69 MHz, 06-3e-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,FSGSBASE,TSC_ADJUST,SMEP,ERMS,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,ARAT,XSAVEOPT,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 1000MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz, 260.21 MHz, 06-3e-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,FSGSBASE,TSC_ADJUST,SMEP,ERMS,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,ARAT,XSAVEOPT,MELTDOWN
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xb0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0: _OSC failed
acpicmos0 at acpi0
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: KVM
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x00
vga1 at pci0 dev 1 function 0 "Bochs VGA" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 0 int 10
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 0 int 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: no HD-Audio codecs
ppb0 at pci0 dev 28 function 0 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci4 at ppb3 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 0 int 10
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 0 int 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci6 at ppb5 bus 6
virtio0 at pci6 dev 5 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio0: qsize 128
scsibus1 at vioscsi0: 255 targets
sd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+> SCSI3 0/direct fixed
sd0: 24576MB, 512 bytes/sector, 50331648 sectors, thin
virtio0: msix shared
re0 at pci6 dev 18 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 0 int 10, address d2:03:bd:96:f0:8c
rlphy0 at re0 phy 0: RTL internal PHY
ppb6 at pci5 dev 2 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci7 at ppb6 bus 7
ppb7 at pci5 dev 3 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci5 dev 4 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci9 at ppb8 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.0
ahci0: port 1: 1.5Gb/s
scsibus2 at ahci0: 32 targets
cd0 at scsibus2 targ 1 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 0 int 10
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (fb044f9fda06d052.a) swap on sd0b dump on sd0b
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
syncing disks... done
rebooting...
OpenBSD 6.5-current (GENERIC.MP) #2: Fri Aug 2 22:33:13 IST 2019
fireman@obsdcur20190730.ogmaconnect:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4278140928 (4079MB)
avail mem = 4138319872 (3946MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf5900 (10 entries)
bios0: vendor SeaBIOS version
"rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org" date 04/01/2014
bios0: QEMU Standard PC (Q35 + ICH9, 2009)
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET MCFG
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz, 98.24 MHz, 06-3e-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,FSGSBASE,TSC_ADJUST,SMEP,ERMS,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,ARAT,XSAVEOPT,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 999MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz, 254.15 MHz, 06-3e-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,FSGSBASE,TSC_ADJUST,SMEP,ERMS,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,ARAT,XSAVEOPT,MELTDOWN
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xb0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0: _OSC failed
acpicmos0 at acpi0
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: KVM
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x00
vga1 at pci0 dev 1 function 0 "Bochs VGA" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 0 int 10
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 0 int 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: no HD-Audio codecs
ppb0 at pci0 dev 28 function 0 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 vendor "Red Hat", unknown product
0x000c rev 0x00: apic 0 int 10
pci4 at ppb3 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 0 int 10
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 0 int 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci6 at ppb5 bus 6
virtio0 at pci6 dev 5 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio0: qsize 128
scsibus1 at vioscsi0: 255 targets
sd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+> SCSI3 0/direct fixed
sd0: 24576MB, 512 bytes/sector, 50331648 sectors, thin
virtio0: msix shared
re0 at pci6 dev 18 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 0 int 10, address d2:03:bd:96:f0:8c
rlphy0 at re0 phy 0: RTL internal PHY
ppb6 at pci5 dev 2 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci7 at ppb6 bus 7
ppb7 at pci5 dev 3 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci5 dev 4 function 0 "Red Hat Qemu PCI-PCI" rev 0x00
pci9 at ppb8 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.0
ahci0: port 1: 1.5Gb/s
scsibus2 at ahci0: 32 targets
cd0 at scsibus2 targ 1 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 0 int 10
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (fb044f9fda06d052.a) swap on sd0b dump on sd0b
re0: watchdog timeout
re0: watchdog timeout
Domain /dev/pci0:
0:0:0: Intel 82G33 Host
0:1:0: Bochs VGA
0:26:0: Intel 82801I USB
0:26:1: Intel 82801I USB
0:26:2: Intel 82801I USB
0:26:7: Intel 82801I USB
0:27:0: Intel 82801I HD Audio
0:28:0: Red Hat unknown
0:28:1: Red Hat unknown
0:28:2: Red Hat unknown
0:28:3: Red Hat unknown
0:29:0: Intel 82801I USB
0:29:1: Intel 82801I USB
0:29:2: Intel 82801I USB
0:29:7: Intel 82801I USB
0:30:0: Intel 82801BA Hub-to-PCI
0:31:0: Intel 82801IB LPC
0:31:2: Intel 82801I AHCI
0:31:3: Intel 82801I SMBus
5:1:0: Red Hat Qemu PCI-PCI
5:2:0: Red Hat Qemu PCI-PCI
5:3:0: Red Hat Qemu PCI-PCI
5:4:0: Red Hat Qemu PCI-PCI
6:5:0: Qumranet Virtio SCSI
6:18:0: Realtek 8139
6:18:0: Realtek 8139
0x0000: Vendor ID: 10ec, Product ID: 8139
0x0004: Command: 0107, Status: 0008
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 20
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x00004000/0x0100
0x0014: BAR mem 32bit addr: 0xfde41000/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1af4 Product ID: 1100
0x0030: Expansion ROM Base Address: fde00000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
--
Kindest regards,
Tom Smyth.
