On 8.4.2019. 19:55, Hrvoje Popovski wrote:
> On 8.4.2019. 11:33, David Gwynne wrote:
>> this updates the ifconfig part of the diff
>
> This is great feature... thank you ..
maybe to put laser wavelength in sff output?
ix0 - 1000BASE-LX
x3550m4# ifconfig ix0 sff
ix0: identifier SFP (03)
connector: LC (07)
vendor: FiberStore
product: SFP1G-LX-31
revision: (unknown)
serial: F175EX02389
date: 2017-05-31
temperature: 39.33 C
vcc: 3.39 V
tx-bias: 15.35 mA
tx-power: -6.13 dBm
rx-power: -5.58 dBm average
SFP 33 Temperature = 31.285C
SFP 33 Voltage = 3.333V
SFP 33 Tx Bias Current = 18.400mA
SFP 33 Tx Power = -6.0467dBm
SFP 33 Rx Power = -5.1670dBm
ix0 - 10GBASE-ER
x3550m4# ifconfig ix0 sff
ix0: identifier SFP (03)
connector: LC (07)
vendor: OEM
product: CSS-907A15DE-15
revision: 1.0
serial: 1803070025
date: 2018-03-08
temperature: 37.88 C
vcc: 3.31 V
tx-bias: 72.39 mA
tx-power: 0.90 dBm
rx-power: -0.14 dBm average
SFP+ 33 Temperature = 24.453C
SFP+ 33 Voltage = 3.252V
SFP+ 33 Tx Bias Current = 74.740mA
SFP+ 33 Tx Power = 1.1598dBm
SFP+ 33 Rx Power = -0.4479dBm
it's strange that with ix0 media is 10GSFP+Cu. i think that is should be
10GbaseER ?
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (10GSFP+Cu full-duplex,rxpause,txpause)
status: active
supported media:
media 10GSFP+Cu
media autoselect
ixl1 - 10GBASE-SR
x3550m4# ifconfig ixl1 sff
ixl1: identifier SFP (03)
connector: LC (07)
vendor: OEM
product: 10GB-SFP-SR-H
revision: 10
serial: HXP96S02
date: 2014-03-03
temperature: 30.80 C
vcc: 3.33 V
tx-bias: 5.85 mA
tx-power: -3.31 dBm
rx-power: -4.40 dBm average
SFP+ 34 Temperature = 35.398C
SFP+ 34 Voltage = 3.277V
SFP+ 34 Tx Bias Current = 10.884mA
SFP+ 34 Tx Power = -2.6930dBm
SFP+ 34 Rx Power = -3.3838dBm
