On 8.4.2019. 11:33, David Gwynne wrote:
> this updates the ifconfig part of the diff
This is great feature... thank you ..
it would be great if dBm could be exported via snmp :)
switch - Dell S4810
ix0 - sfp+ 10GBASE-SR optics
ix1 - sfp 1000BASE-SX optics
ixl0 - 10G passive DAC cables
x3550m4# ifconfig ix0 sff
ix0: identifier SFP (03)
connector: LC (07)
vendor: Intel Corp
product: FTLX8571D3BCV-IT
revision: A
serial: MTB07YW
date: 2015-03-26
temperature: 39.21 C
vcc: 3.36 V
tx-bias: 7.97 mA
tx-power: -2.66 dBm
rx-power: -4.22 dBm average
switch side
SFP+ 33 Temperature = 32.133C
SFP+ 33 Voltage = 3.283V
SFP+ 33 Tx Bias Current = 10.728mA
SFP+ 33 Tx Power = -2.6978dBm
SFP+ 33 Rx Power = -2.2643dBm
dBm values on openbsd and switch should be similar, right ?
x3550m4# ifconfig ix1 sff
ix1: identifier SFP (03)
connector: LC (07)
vendor: CISCO-FINISAR
product: FTRJ-8519-7D-CSC
revision: (unknown)
serial: H11H167
date: 2004-01-23
x3550m4# ifconfig ixl0 sff
ixl0: identifier SFP (03)
connector: Copper Pigtail (21)
vendor: Amphenol
product: 616740005
revision: C
serial: CN0358VV6751650
date: 2016-07-07
