Hi,
as a general note for virtual switches and clouds that don’t support CARP due
to restrictions on multicast and/or additional MACs: I use carppeer and lladdr
of the parent interface in such cases.
That doesn’t mean that you should need it with vmd and bridge and we have to
look into this.
Reyk
> Am 09.12.2018 um 16:56 schrieb Mischa <obs...@high5.nl>:
>
> Hi All,
>
> Is there a way to get carp working through a bridge?
> I am currently testing to see whether I can have 2 vmd VMs on different hosts
> use carp between them.
> The current state that I am currently at is, both VMs are master.
>
> Setup on both hosts is the same, bridge1 with em0 as interface.
>
> # vm.conf
> switch "uplink_bridge1" {
> interface bridge1
> }
> vm "lb1" {
> disable
> disk "/home/mischa/vmm/lb1.img"
> interface tap {
> switch "uplink_bridge1"
> }
> }
>
> lb1 carp config:
> inet 192.168.0.100 255.255.255.0 NONE vhid 1 pass xxxx carpdev vio0 advbase
> 10 advskew 100
>
> lb2 carp config:
> inet 192.168.0.100 255.255.255.0 NONE vhid 1 pass xxxx carpdev vio0 advbase
> 10 advskew 110
>
> Is there anything that can be configured on the bridge side?
>
> Mischa
>
