Hi David,
Yes there is. Currently the machine are directly connected to each other on
em0, the VMs are able to reach each other.
VM1 -> bridge1 -> em0 — em0 <- bridge1 <- VM2
Mischa
--
> On 10 Dec 2018, at 03:00, David Gwynne <da...@gwynne.id.au> wrote:
>
> Is there a shared ethernet network between the bridges on each host?
>
>> On 10 Dec 2018, at 01:56, Mischa <obs...@high5.nl> wrote:
>>
>> Hi All,
>>
>> Is there a way to get carp working through a bridge?
>> I am currently testing to see whether I can have 2 vmd VMs on different
>> hosts use carp between them.
>> The current state that I am currently at is, both VMs are master.
>>
>> Setup on both hosts is the same, bridge1 with em0 as interface.
>>
>> # vm.conf
>> switch "uplink_bridge1" {
>> interface bridge1
>> }
>> vm "lb1" {
>> disable
>> disk "/home/mischa/vmm/lb1.img"
>> interface tap {
>> switch "uplink_bridge1"
>> }
>> }
>>
>> lb1 carp config:
>> inet 192.168.0.100 255.255.255.0 NONE vhid 1 pass xxxx carpdev vio0 advbase
>> 10 advskew 100
>>
>> lb2 carp config:
>> inet 192.168.0.100 255.255.255.0 NONE vhid 1 pass xxxx carpdev vio0 advbase
>> 10 advskew 110
>>
>> Is there anything that can be configured on the bridge side?
>>
>> Mischa
>>
>
