No you don't change the standby stuff from the profiles program. You do that
from the Settings program.
Signed: Stephen Giggar
Skype: dr-phone.
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
----- Original Message -----
From: "Scott Meyer" <scottt.me...@verizon.net>
To: "'Talks Mailing List'" <talks@talksusers.com>
Sent: Friday, January 24, 2014 11:40 AM
Subject: Re: [Talks] N86 How do you have talks say the name of the callerin
Contact list and a menu question.
Hi Brad and Eleanor
Thanks solved the first issue. The second one I get to ring tone tab and
it
says 6 tabs but I can't move out of ring tone tab. So I cannot find the
standby tab.
Regards
Scott
-----Original Message-----
From: talks-boun...@talksusers.com [mailto:talks-boun...@talksusers.com]
On
Behalf of Brad Keller
Sent: Friday, January 24, 2014 10:25 AM
To: Talks Mailing List
Subject: Re: [Talks] N86 How do you have talks say the name of the caller
in
Contact list and a menu question.
As for getting the phone to say the name of the caller, you will need to
go
into menu, tools, profiles, and select the active profile... e.g. general,
meeting, etc... then select personalize, then arrow to the "say name"
option
and turn that on. After that make sure you exit by pressing soft key 2
until
you reach the stand by screen. As for the other question... go to menu,
tools, settings, general, personalazation, stand by mode, then shortcuts.
Here you will be able to change what the short cut keys are when on the
stand by screen. You should note here that for the last question I was
using
my N85 to get you to the place you wanted so it may be slightly different
with the N86 although similar.
----- Original Message -----
From: "Scott Meyer" <scottt.me...@verizon.net>
To: "'Talks Mailing List'" <talks@talksusers.com>
Sent: Friday, January 24, 2014 8:43 AM
Subject: [Talks] N86 How do you have talks say the name of the caller in
Contact list and a menu question.
Hi
Have an N86.How do you get talks to say the name of the caller when
phone rings and the caller is in the contact list?
How do you remove a menu item? When my N86 comes on, it says new audio
message, contacts and reader. I can hit 1 for contacts and 2 for
reader, which I want to keep, but can't figure out how to get rid of
new audio message, thought it was a good shortcut to quickly get to
new audio messages from phone call box. It never worked.
Thanks Scott
Thanks
Scott
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/ and Talknav Inc.
http://www.talknav.net/
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/ and Talknav Inc.
http://www.talknav.net/
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
