"Troy A. Griffitts" <[EMAIL PROTECTED]> writes:
> Could you execute these exact commands and attach out.txt. Mine is
> attached for your comparison.
Done, but I had already gone through that. This morning, I checked out
a completely fresh copy of the source and rebuilt, just to be absolutely
sure nothing out of date was holding me back. I still get the wrong
behavior, and stopped it with ^C again.
I may step into this with a debugger later today, but I'm not sure I'll
have time before I head back home, and I'm completely unfamiliar with
this part of the Sword code in the first place (or I would have tried
some debugging of it by now myself anyhow).
It would be interesting to know what behavior is seen by someone besides
you and me.
--karl
-=+* WARNING *+=- -=+* WARNING *+=-
Although Install Manager provides a convenient way for installing
and upgrading SWORD components, it also uses a systematic method
for accessing sites which gives packet sniffers a target to lock
into for singling out users.
IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.
if you understand this and are willing to enable remote source features
then type yes at the prompt
enable? [no]
Initialized basic config file at [/home/karl/.sword/InstallMgr/InstallMgr.conf]
with remote source features ENABLED
* About to connect() to ftp.crosswire.org port 21 (#0)
* Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS [EMAIL PROTECTED]
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||60103|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 60103
> TYPE I
< 200 Switching to Binary mode.
> SIZE mods.d.tar.gz
< 213 82941
> RETR mods.d.tar.gz
< 150 Opening BINARY mode data connection for mods.d.tar.gz (82941 bytes).
* Maxdownload = -1
* Getting file with size: 82941
* Remembering we are in dir pub/sword/raw/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
> QUIT
< 221 Goodbye.
* Closing connection #0
Remote Source Refreshed
* About to connect() to ftp.crosswire.org port 21 (#0)
* Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS [EMAIL PROTECTED]
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||5521|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 5521
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> CWD /
< 250 Directory successfully changed.
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD dead
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||35802|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 35802
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//dead/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||50187|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 50187
> TYPE I
< 200 Switching to Binary mode.
> SIZE dra.conf
< 213 272
> RETR dra.conf
< 150 Opening BINARY mode data connection for dra.conf (272 bytes).
* Maxdownload = -1
* Getting file with size: 272
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||13128|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 13128
> SIZE hitchcock.conf
< 213 938
> RETR hitchcock.conf
< 150 Opening BINARY mode data connection for hitchcock.conf (938 bytes).
* Maxdownload = -1
* Getting file with size: 938
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||59795|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 59795
> SIZE kekchi.conf
< 213 282
> RETR kekchi.conf
< 150 Opening BINARY mode data connection for kekchi.conf (282 bytes).
* Maxdownload = -1
* Getting file with size: 282
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||35842|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 35842
> SIZE lightfoot.conf
< 213 447
> RETR lightfoot.conf
< 150 Opening BINARY mode data connection for lightfoot.conf (447 bytes).
* Maxdownload = -1
* Getting file with size: 447
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||33449|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 33449
> SIZE luther.conf
< 213 364
> RETR luther.conf
< 150 Opening BINARY mode data connection for luther.conf (364 bytes).
* Maxdownload = -1
* Getting file with size: 364
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||49015|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 49015
> SIZE nave.conf
< 213 1284
> RETR nave.conf
< 150 Opening BINARY mode data connection for nave.conf (1284 bytes).
* Maxdownload = -1
* Getting file with size: 1284
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||37090|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 37090
> SIZE peshitta.conf
< 213 535
> RETR peshitta.conf
< 150 Opening BINARY mode data connection for peshitta.conf (535 bytes).
* Maxdownload = -1
* Getting file with size: 535
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||18092|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 18092
> SIZE robinson.conf
< 213 589
> RETR robinson.conf
< 150 Opening BINARY mode data connection for robinson.conf (589 bytes).
* Maxdownload = -1
* Getting file with size: 589
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||9219|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 9219
> SIZE smith.conf
< 213 497
> RETR smith.conf
< 150 Opening BINARY mode data connection for smith.conf (497 bytes).
* Maxdownload = -1
* Getting file with size: 497
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||33053|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 33053
> SIZE spurious.conf
< 213 445
> RETR spurious.conf
< 150 Opening BINARY mode data connection for spurious.conf (445 bytes).
* Maxdownload = -1
* Getting file with size: 445
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||60187|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 60187
> SIZE strongsgreek.conf
< 213 625
> RETR strongsgreek.conf
< 150 Opening BINARY mode data connection for strongsgreek.conf (625 bytes).
* Maxdownload = -1
* Getting file with size: 625
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||9406|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 9406
> SIZE strongshebrew.conf
< 213 627
> RETR strongshebrew.conf
< 150 Opening BINARY mode data connection for strongshebrew.conf (627 bytes).
* Maxdownload = -1
* Getting file with size: 627
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||25773|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 25773
> SIZE swe1917.conf
< 213 811
> RETR swe1917.conf
< 150 Opening BINARY mode data connection for swe1917.conf (811 bytes).
* Maxdownload = -1
* Getting file with size: 811
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||24329|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 24329
> SIZE tokpisin.conf
< 213 336
> RETR tokpisin.conf
< 150 Opening BINARY mode data connection for tokpisin.conf (336 bytes).
* Maxdownload = -1
* Getting file with size: 336
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||39057|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 39057
> SIZE tr.conf
< 213 664
> RETR tr.conf
< 150 Opening BINARY mode data connection for tr.conf (664 bytes).
* Maxdownload = -1
* Getting file with size: 664
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||28488|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 28488
> SIZE webster.conf
< 213 1922
> RETR webster.conf
< 150 Opening BINARY mode data connection for webster.conf (1922 bytes).
* Maxdownload = -1
* Getting file with size: 1922
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> CWD /
< 250 Directory successfully changed.
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD locales.d
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||31207|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 31207
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||56976|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 56976
> TYPE I
< 200 Switching to Binary mode.
> SIZE abbr.conf
< 213 3252
> RETR abbr.conf
< 150 Opening BINARY mode data connection for abbr.conf (3252 bytes).
* Maxdownload = -1
* Getting file with size: 3252
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||52609|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 52609
> SIZE cs.conf
< 213 5404
> RETR cs.conf
< 150 Opening BINARY mode data connection for cs.conf (5404 bytes).
* Maxdownload = -1
* Getting file with size: 5404
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||57927|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 57927
> SIZE da.conf
< 213 7884
> RETR da.conf
< 150 Opening BINARY mode data connection for da.conf (7884 bytes).
* Maxdownload = -1
* Getting file with size: 7884
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||22967|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 22967
> SIZE de.conf
< 213 4712
> RETR de.conf
< 150 Opening BINARY mode data connection for de.conf (4712 bytes).
* Maxdownload = -1
* Getting file with size: 4712
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||35140|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 35140
> SIZE de_abbrev.conf
< 213 3929
> RETR de_abbrev.conf
< 150 Opening BINARY mode data connection for de_abbrev.conf (3929 bytes).
* Maxdownload = -1
* Getting file with size: 3929
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||13345|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 13345
> SIZE en_GB.conf
< 213 3186
> RETR en_GB.conf
< 150 Opening BINARY mode data connection for en_GB.conf (3186 bytes).
* Maxdownload = -1
* Getting file with size: 3186
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||26648|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 26648
> SIZE es.conf
< 213 4657
> RETR es.conf
< 150 Opening BINARY mode data connection for es.conf (4657 bytes).
* Maxdownload = -1
* Getting file with size: 4657
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||57573|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 57573
> SIZE et.conf
< 213 5810
> RETR et.conf
< 150 Opening BINARY mode data connection for et.conf (5810 bytes).
* Maxdownload = -1
* Getting file with size: 5810
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||46519|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 46519
> SIZE et_abbr.conf
< 213 5355
> RETR et_abbr.conf
< 150 Opening BINARY mode data connection for et_abbr.conf (5355 bytes).
* Maxdownload = -1
* Getting file with size: 5355
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||55881|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 55881
> SIZE fi.conf
< 213 6633
> RETR fi.conf
< 150 Opening BINARY mode data connection for fi.conf (6633 bytes).
* Maxdownload = -1
* Getting file with size: 6633
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||34099|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 34099
> SIZE fr.conf
< 213 6945
> RETR fr.conf
< 150 Opening BINARY mode data connection for fr.conf (6945 bytes).
* Maxdownload = -1
* Getting file with size: 6945
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||46513|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 46513
> SIZE fr_FR.ISO-8859-1.conf
< 213 6951
> RETR fr_FR.ISO-8859-1.conf
< 150 Opening BINARY mode data connection for fr_FR.ISO-8859-1.conf (6951
bytes).
* Maxdownload = -1
* Getting file with size: 6951
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||56325|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 56325
> SIZE id.conf
< 213 4951
> RETR id.conf
< 150 Opening BINARY mode data connection for id.conf (4951 bytes).
* Maxdownload = -1
* Getting file with size: 4951
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
_______________________________________________
sword-devel mailing list: sword-devel@crosswire.org
http://www.crosswire.org/mailman/listinfo/sword-devel
Instructions to unsubscribe/change your settings at above page
