Karl,
Could you execute these exact commands and attach out.txt. Mine is
attached for your comparison.
[EMAIL PROTECTED] utilities]# ./installmgr -init > out.txt 2>&1
yes
[EMAIL PROTECTED] utilities]# ./installmgr -r CrossWire >> out.txt 2>&1
[EMAIL PROTECTED] utilities]# ./installmgr -ri CrossWire KJV >> out.txt 2>&1
Karl Kleinpaste wrote:
"Troy A. Griffitts" <[EMAIL PROTECTED]> writes:
I attempted to reproduce:
http://crosswire.org/bugs/browse/API-79 which says that InstallMgr
cannot update a module. I also remember having troubles with InstallMgr
loosing its head when downloading, but couldn't reproduce the issue
tonight by trying to update a module.
...
If anyone can reproduce this problem, please let me know soon;
Troy, I am updated to Sword -r2078 and have rebuilt, and I still get the
same type of failure in F7 with all recent rpm updates. My config,
scraped from config.log, is:
./configure --enable-tests --with-icu --sysconfdir=/etc --without-conf
--prefix=/usr
The output from "installmgr -ri Crosswire KJV" shows this oddness:
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
CWD /
< 250 Directory successfully changed.
CWD pub
< 250 Directory successfully changed.
CWD sword
< 250 Directory successfully changed.
CWD raw
< 250 Directory successfully changed.
CWD dead
< 250 Directory successfully changed.
"dead"? Why is such a dir there, and why is installmgr interested in it?
Following this, it began to obtain random *.conf; I stopped it with ^C.
If I can offer any further info, I'll be glad to, but the problem
definitely still exists.
I have curl-7.16.2-1.
_______________________________________________
sword-devel mailing list: sword-devel@crosswire.org
http://www.crosswire.org/mailman/listinfo/sword-devel
Instructions to unsubscribe/change your settings at above page
no resource index to load
status U_MISSING_RESOURCE_ERROR
-=+* WARNING *+=- -=+* WARNING *+=-
Although Install Manager provides a convenient way for installing
and upgrading SWORD components, it also uses a systematic method
for accessing sites which gives packet sniffers a target to lock
into for singling out users.
IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.
if you understand this and are willing to enable remote source features
then type yes at the prompt
enable? [no]
Initialized basic config file at [/root/.sword/InstallMgr/InstallMgr.conf]
with remote source features ENABLED
no resource index to load
status U_MISSING_RESOURCE_ERROR
* About to connect() to ftp.crosswire.org port 21
* Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS [EMAIL PROTECTED]
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||25227|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 25227
> TYPE I
< 200 Switching to Binary mode.
> SIZE mods.d.tar.gz
< 213 82941
> RETR mods.d.tar.gz
< 150 Opening BINARY mode data connection for mods.d.tar.gz (82941 bytes).
* Getting file with size: 82941
* Remembering we are in dir pub/sword/raw/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
> QUIT
< 221 Goodbye.
* Closing connection #0
Remote Source Refreshed
no resource index to load
status U_MISSING_RESOURCE_ERROR
no resource index to load
status U_MISSING_RESOURCE_ERROR
no resource index to load
status U_MISSING_RESOURCE_ERROR
* About to connect() to ftp.crosswire.org port 21
* Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS [EMAIL PROTECTED]
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD modules
< 250 Directory successfully changed.
> CWD texts
< 250 Directory successfully changed.
> CWD ztext
< 250 Directory successfully changed.
> CWD kjv
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||35960|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 35960
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||54146|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 54146
> TYPE I
< 200 Switching to Binary mode.
> SIZE kjvpref.rtf
< 213 70500
> RETR kjvpref.rtf
< 150 Opening BINARY mode data connection for kjvpref.rtf (70500 bytes).
* Getting file with size: 70500
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||49473|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 49473
> TYPE I
< 200 Switching to Binary mode.
> SIZE nt.bzs
< 213 324
> RETR nt.bzs
< 150 Opening BINARY mode data connection for nt.bzs (324 bytes).
* Getting file with size: 324
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||24659|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 24659
> TYPE I
< 200 Switching to Binary mode.
> SIZE nt.bzv
< 213 82460
> RETR nt.bzv
< 150 Opening BINARY mode data connection for nt.bzv (82460 bytes).
* Getting file with size: 82460
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||36672|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 36672
> TYPE I
< 200 Switching to Binary mode.
> SIZE nt.bzz
< 213 1378807
> RETR nt.bzz
< 150 Opening BINARY mode data connection for nt.bzz (1378807 bytes).
* Getting file with size: 1378807
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||19537|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 19537
> TYPE I
< 200 Switching to Binary mode.
> SIZE ot.bzs
< 213 468
> RETR ot.bzs
< 150 Opening BINARY mode data connection for ot.bzs (468 bytes).
* Getting file with size: 468
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||19942|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 19942
> TYPE I
< 200 Switching to Binary mode.
> SIZE ot.bzv
< 213 241150
> RETR ot.bzv
< 150 Opening BINARY mode data connection for ot.bzv (241150 bytes).
* Getting file with size: 241150
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||18120|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 18120
> TYPE I
< 200 Switching to Binary mode.
> SIZE ot.bzz
< 213 2116588
> RETR ot.bzz
< 150 Opening BINARY mode data connection for ot.bzz (2116588 bytes).
* Getting file with size: 2116588
* Remembering we are in dir pub/sword/raw/modules/texts/ztext/kjv/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
> QUIT
< 221 Goodbye.
* Closing connection #0
Installed module: [KJV]
_______________________________________________
sword-devel mailing list: sword-devel@crosswire.org
http://www.crosswire.org/mailman/listinfo/sword-devel
Instructions to unsubscribe/change your settings at above page
