Do you control the Asterisk? If yes, depending on Asterisk capabilities of building replies, you may be able to do some automation to detect the external port.
Cheers, Daniel On Thu, Jan 14, 2016 at 3:47 PM, Nelson Migliaro <eng.migli...@gmail.com> wrote: > There is not a public Kamailio, only one Kamailio behind NAT, > > Right now the configuration is: > > Asterisk <-> Kamailio (Private IP + advertise public IP + RTP Proxy ) <-> > Internet router (public IP + symmetric na) <-> Internet > > Regards, > > 2016-01-14 15:43 GMT+01:00 Daniel-Constantin Mierla <mico...@gmail.com>: > >> Is the kamailio behind nat communicating with another kamailio on a >> public IP? >> >> Cheers, >> DAniel >> >> On Thu, Jan 14, 2016 at 1:33 PM, Nelson Migliaro <eng.migli...@gmail.com> >> wrote: >> >>> Thank you Daniel for your answer, >>> >>> As you mention, there is a symmetric nat and router does not allow a >>> static NAT. >>> >>> By sniffing traffic I can see the port is using new but in case it >>> change, how can automate the process of advertising the correct port? >>> >>> Cheers! >>> >>> >>> ---------- Forwarded message ---------- >>> From: Daniel-Constantin Mierla <mico...@gmail.com> >>> Date: 2016-01-13 23:28 GMT+01:00 >>> Subject: Re: [SR-Users] Kamailio and NAT >>> To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.sip-router.org >>> > >>> >>> >>> Hello, >>> >>> it looks like you have a symmetric nat router, so the allocated port is >>> randomly selected. >>> >>> If you don't control the nat router to set a static forwarding rule or >>> it doesn't provide the option to set static forwarding, then you are pretty >>> much left with sniffing the traffic to discover the external port and >>> advertise it. >>> >>> Cheers, >>> Daniel >>> >>> >>> >>> >>> On 13/01/16 20:31, Nelson Migliaro wrote: >>> >>> Hello, >>> >>> I finally were able to run my Kamailio behind NAT but in order to >>> accomplish that I included: >>> >>> listen=udp:SOURCE-IP:5060 advertise PUBLIC-IP:52548 >>> >>> 52548 is the port my internet router change when doing NAT >>> (5060->52548). I found this port sniffing traffic >>> >>> Conclusions at this point are: >>> >>> >>> ---------------------------------------------1-------------------------------------------------------------------------------------------------- >>> If I use this line: >>> >>> listen=udp:SOURCE-IP:5060 advertise PUBLIC-IP:5060 it does not work :( >>> >>> When I dial a call, INVITE / ACK / Trying / OK goes fine because they >>> are part of the same transaction >>> When remote party disconnects the call, BYE goes to PUBLIC-IP port 5060 >>> and router blocks de request. I assume vendor sends BYE to 5060 because it >>> is a new transaction >>> >>> -----------------------------------------------2-------------------------------------------------------------------------------------------------- >>> >>> If I use this line: >>> >>> listen=udp:SOURCE-IP:5060 advertise PUBLIC-IP:52548 it work !!!!!! >>> >>> When I dial a call, INVITE / ACK / Trying / OK goes fine because they >>> are part of the same transaction >>> When remote party disconnects the call, BYE goes to PUBLIC-IP port 52548 >>> and router forward the request to Kamailio. Since there is an open >>> connection. >>> >>> I need to find the way to find the way to advertise the public port >>> internet router is doing NAT (PAT). >>> >>> >>> --------------------------------------------------------------------------------------------------------------------------------------------------- >>> This trace is a call that worked fine because I included line: >>> >>> listen=udp:SOURCE-IP:5060 advertise PUBLIC-IP:52548 >>> >>> >>> This trace is an INVITE with this line: listen=udp:SOURCE-IP:5060 >>> advertise PUBLIC-IP:52548 >>> 2016/01/13 20:10:15.793568 PRIVATE-IP-KAMAILIO:5060 -> VENDOR-IP:5060 >>> INVITE sip:NUM-DESTINATION@VENDOR-IP SIP/2.0 >>> Record-Route: < >>> sip:PUBLIC-IP:52548;lr=on;ftag=as3b72a453;vsf=AAAAAAEECQkCAgsNAXBeL0NPXVQfU0suMTY5LjIzMQ--;vst=AAAAAAAAAAAAAAAAAABCUEIAX1lKWF5MF0tB >>> A-;nat=yes> >>> Via: SIP/2.0/UDP >>> PUBLIC-IP:52548;branch=z9hG4bKdd74.992e238037882e809653f713a5a580a9.0 >>> Via: SIP/2.0/UDP >>> PRIVATE-IP-SOFTPHONE:5060;received=PRIVATE-IP-SOFTPHONE;branch=z9hG4bK2f4e76ba;rport=5060 >>> Max-Forwards: 69 >>> From: NUM-SOURCE <sip:NUM-SOURCE@PRIVATE-IP-KAMAILIO>;tag=as3b72a453 >>> To: <sip:NUM-DESTINATION@sip.VENDOR-IP> >>> Contact: >>> <sip:NUM-SOURCE@PRIVATE-IP-SOFTPHONE:5060;alias=PUBLIC-IP~5060~1> >>> Call-ID: 329950447629810f7bdeaeed0cc034e1@PRIVATE-IP-SOFTPHONE:5060 >>> CSeq: 102 INVITE >>> User-Agent: Kamailio >>> Date: Wed, 13 Jan 2016 19:10:15 GMT >>> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, >>> INFO, PUBLISH, MESSAGE >>> Supported: replaces, timer >>> Content-Type: application/sdp >>> Content-Length: 255 >>> >>> >>> Trying..... >>> >>> 2016/01/13 20:10:15.842055 VENDOR-IP:5060 -> PRIVATE-IP-KAMAILIO:5060 >>> SIP/2.0 100 trying -- your call is important to us >>> Via: SIP/2.0/UDP >>> PUBLIC-IP:52548;branch=z9hG4bKdd74.992e238037882e809653f713a5a580a9.1;rport=52548 >>> Via: SIP/2.0/UDP >>> PRIVATE-IP-SOFTPHONE:5060;received=PRIVATE-IP-SOFTPHONE;branch=z9hG4bK2f4e76ba;rport=5060 >>> From: NUM-SOURCE <sip:NUM-SOURCE@PRIVATE-IP-KAMAILIO>;tag=as3b72a453 >>> To: <sip:NUM-DESTINATION@VENDOR-IP> >>> Call-ID: 329950447629810f7bdeaeed0cc034e1@PRIVATE-IP-SOFTPHONE:5060 >>> CSeq: 102 INVITE >>> Server: kamailio >>> Content-Length: 0 >>> >>> >>> >>> >>> And finally a BYE >>> >>> 2016/01/13 20:10:28.545526 VENDOR-IP:5060 -> PRIVATE-IP-KAMAILIO:5060 >>> BYE sip:34982298000@PRIVATE-IP-SOFTPHONE:5060;alias=PUBLIC-IP~5060~1 >>> SIP/2.0 >>> Via: SIP/2.0/UDP >>> VENDOR-IP;branch=z9hG4bK26d8.847e6e14eef37e2cfc8b5e81d33de73d.0 >>> From: <sip:675896262@PRIVATE-IP-KAMAILIO>;tag=gK0293ed93 >>> To: "NUM-SOURCE" <sip:NUM-SOURCE@ <sip%3anum-sou...@norvoz.es>VENDOR-IP >>> >;tag=as3b72a453 >>> Call-ID: 329950447629810f7bdeaeed0cc034e1@PRIVATE-IP-SOFTPHONE:5060 >>> CSeq: 28731 BYE >>> Max-Forwards: 69 >>> Route: < >>> sip:PUBLIC-IP:52548;lr=on;ftag=as3b72a453;vsf=AAAAAAEECQkCAgsNAXBeL0NPXVQfU0suMTY5LjIzMQ--;vst=AAAAAAAAAAAAAAAAAABCUEIAX1lKWF5MF0tBMzA-;na >>> yes> >>> Reason: Q.850;cause=16 >>> Content-Length: 0 >>> >>> >>> >>> >>> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- >>> >>> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- >>> >>> Finally, It is finally working because I hardcoded NAT´d port. >>> I would like to find a way to avoid setting the port in "hard". >>> >>> Thank you >>> >>> >>> >>> >>> >>> -- >>> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - >>> http://www.linkedin.com/in/miconda >>> Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >> >> >> -- >> Daniel-Constantin Mierla - http://www.asipto.com >> http://twitter.com/#!/miconda - http://www.linkedin.com/in/micond >> <http://www.linkedin.com/in/miconda> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/micond <http://www.linkedin.com/in/miconda>
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
