When you are running Kamailio behind a NAT you should use advertise parameter of listen address. According to documentation " A typical use case for advertise address is when running SIP server behind a NAT/Firewall, when the local IP address (to be used for bind) is different than the public IP address (to be used for advertising).". For example:
listen=udp:10.10.10.10:5060 advertise 11.11.11.11:5060 For more info refer to http://www.kamailio.org/wiki/cookbooks/3.3.x/core#listen Regards Gholamreza Sabery Tabrizy On Wed, Jan 13, 2016 at 2:39 AM, Daniel-Constantin Mierla <mico...@gmail.com > wrote: > Hello, > > can you get the SIP trace with all the packets of such dialog outside of > the NAT router? It will help to see the headers and based on that we may be > able to provide a solution. > > Cheers, > Daniel > > > On 12/01/16 19:13, Nelson Migliaro wrote: > > Thank you for your answer. > > The problem I have is with internet router doing to PAT to SIP port. > I am already advertising public IP but unfortunately I cant know the > public port I am using. > > 2015-12-28 18:17 GMT+01:00 Alexandru Covalschi <568...@gmail.com>: > >> AFAIK bye is usually sent to the address stored in record_route. Try >> setting changing record_route() to >> record_route_preset("PUBLICIP:5060;nat=yes:) >> >> 2015-12-23 16:28 GMT+02:00 Nelson Migliaro < <eng.migli...@gmail.com> >> eng.migli...@gmail.com>: >> >>> >>> Hello, >>> >>> I am running Kamailio behind NAT. >>> >>> Kanailio has a private IP and I am relaying NAT to internet router. >>> >>> I am using: >>> >>> - #!define WITH_NAT >>> - listen=udp:PRIVATE-IP:5060 advertise PUBLIC-IP:5060 >>> >>> - Patched RTP proxy including the advertise option >>> >>> And everything goes fine. I can make calls and have two way audio. >>> >>> The problem begins when the callee ends the call. BYE is not received in >>> Kamailio (caller) >>> >>> I included the public IP using "add_contact_alias" because >>> "set_contact_alias" was not adding the public IP. I included this in in >>> NATDETECT (pre loaded router) >>> >>> if(is_first_hop()) { >>> xlog("L_NOTICE","Metodo: $rm \n"); >>> xlog("L_NOTICE","is first hop\n"); >>> #set_contact_alias(); >>> if (!add_contact_alias("PUBLIC-IP", "$Rp", "udp")) { >>> xlog("L_ERR", "Error in aliasing contact $ct\n"); >>> send_reply("400", "Bad request"); >>> exit; >>> } >>> } >>> >>> I think the problem is related to destination that BYE is sent by the >>> vendor. From what I see IP and port is taken from advertised in contact >>> (PUBLIC-IP and 5060). >>> The problem is that internet router changes the source port. >>> >>> Contact: <sip:999999999@PRIVATE-IP:5060;alias=PUBLIC-IP~5060~1> >>> >>> --- Is it correcto to add_contact_alias("PUBLIC-IP", "$Rp", "udp") in >>> order to received new transactions or should I follow a different >>> procedure??? >>> >>> Thank you >>> >>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >> >> >> -- >> Alexandru Covalschi >> ABRISS-Solutions >> VoIP engineer and system administrator >> phone: +37367398493 >> web: http://abs-telecom.com/ >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing > listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - > http://www.linkedin.com/in/miconda > Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users