Hi!
I've the following setup: Teleco <-> Kamailio <-> Asterisk(s)
The proxy has one public IP (say 1.2.3.4) and one private (10.0.0.1).
The asterisk-pbx:es has private adresses (10.0.0.2 in this example)
I noticed that if I bind like this in kamilio.cfg
listen=tcp:1.2.3.4:5060
listen=udp:1.2.3.4:5060
listen=tcp:10.0.0.1:5060
listen=udp:10.0.0.1:5060
Then if a call comes in from the Telco to Kamailio (1.2.3.4), kamailio
should forward the SIP-packet from it's private address (10.0.0.1) to
asterisk (10.0.0.2)
However, the source address of the packets sent from Kamilio to Asterisk
is wrong - it uses the public ip. Like this (tcpdump output):
15:02:08.999642 IP 1.2.3.4.sip > 10.0.0.1.5060: SIP, length: 1346
15:02:09.474525 IP 1.2.3.4.sip > 10.0.0.1.5060: SIP, length: 1346
15:02:10.474524 IP 1.2.3.4.sip > 10.0.0.1.5060: SIP, length: 1346
15:02:12.474525 IP 1.2.3.4.sip > 10.0.0.1.5060: SIP, length: 1346
Obviously kamailio doesn't get any answers here. The packet goes out of
the right interface, but with the wrong src-address.
However, if I remove the lines with "listen=" in kamailio.cfg to allow
kamilio to bind to all interfaces the src-address is correct and
everything works!
(I've also done some tests with icmp and telnet and the src-addr seems
right in all these cases.)
Is this a bug or am I missing something here?
--
Johan Wilfer
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
