Hi, If by auth you mean the WITH_AUTH #!define in the configuration file then it sounds like a configuration error. You should check that the pua_usrloc stuff you've added isn't excluded when WITH_AUTH is not set.
It is also worth remembering that, if you are using a client that does not support server presence, or you are using a client that does support server presence but doesn't support XCAP, then your configuration will only work when you set the force_active modparam in presence_xml to 1. This is because with force_active not set you need clients that can update the pres-rules documents in the resource list to add new contacts to the allow list before they will be authorised for presence. Regards, Peter On Mon, 2012-01-30 at 17:17 +0100, Vogt, Jonathan wrote: > Hello, > > great. I got presence... but only when I do not enable auth. > > Is there something I have to look out for when enabling auth > > I've take the stock config for 3.2.0 as packed in the ubuntu package > from the website, implementet your changes and reinit the database. > > Apart from your changes I defined WITH_USRLOCDB, WITH_PRESENCE, > WITH_AUTH, WITH_MYSQL. > > No presence with auth. Presence without auth. Cleared the db in > between. > > Any hints > > Thanks > Jonathan > > > ______________________________________________________________________ > Von: sr-users-boun...@lists.sip-router.org > [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von Peter > Dunkley > Gesendet: Freitag, 27. Januar 2012 18:07 > An: SIP Router "- Kamailio (OpenSER) and SIP Express Router (SER) > -Users Mailing "List > Betreff: Re: [SR-Users] Sample pua_usrloc Config Was: > Enableapplication/pidf+xml > > > > > When I am using pua_usrloc... > > Modify the standard config: > > ... > loadmodule "usrloc.so" > loadmodule "pua.so" > loadmodule "pua_usrloc.so" > ... > modparam("pua", "db_url", DBURL) > modparam("pua", "outbound_proxy", "sip:127.0.0.1") > modparam("pua_usrloc", "default_domain", "<<< whatever the > domain your system has >>>") > modparam("pua_usrloc", "entity_prefix", "sip") > ... > route[REGISTRAR] { > > if (is_method("REGISTER")) > { > > pua_set_publish(); > ... > > } > > ... > > > You need to make sure Kamailio is listening on the loopback > (127.0.0.1) device on port 5060, or change the pua outbound_proxy > modparam to contain a real IP address and port that Kamailio is using. > Setting this outbound_proxy parameter makes sure Kamailio routes the > PUBLISH generated by pua/pua_usrloc through itself (so that it can be > picked up and handle_publish() is called) instead of using DNS to try > and route the request. > > Also make sure that the pua database table was created when you ran > kamdbctl to set-up the database. > > Regards, > > Peter > > On Fri, 2012-01-27 at 15:04 +0100, Vogt, Jonathan wrote: > > > Hi sorry, > > I guess I just got mixed up with all the name, merges, forks and > > mailinglists... > > As I started out with openser, tried kamailio and just compiled > > opensips, I would appreaciate a working sample for openser or > > kamailio aswell. > > I just need a sip server with presence support for bravis... which > > for itself does not seem to support server side presence... > > Thanks > > Jonathan > > > > > > ____________________________________________________________________ > > > > Von: sr-users-boun...@lists.sip-router.org > > [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von > > Carsten Bock > > Gesendet: Freitag, 27. Januar 2012 14:55 > > An: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > > UsersMailing List > > Betreff: Re: [SR-Users] Sample pua_usrloc Config Was: > > Enableapplication/pidf+xml > > > > > > > > Hi, > > > > > > this is the wrong mailing list: > > This Mailinglist is about OpenSER (the original), Kamailio, SER and > > sip-router.org - not OpenSIPS. > > If you have problems with an OpenSIPS configuration or module, > > please post it to the OpenSIPS-list. > > > > > > We can only provide help for our modules. > > > > > > Thank you, > > Carsten > > > > 2012/1/27 Vogt, Jonathan <j.v...@swp.de> > > > > Hello, > > could anyone kindly send me a working config which does > > support clients that not support server presence or send me > > a link to a working sample configuration. I seem unable to > > produce a working config myself. > > I have take the source from opensips.org and > > compiled it. > > Taken the conf from > > http://www.opensips.org/Resources/PuaUsrlocConfig replaced > > sip domain and ip and enabled auth > > Reset DB and created users > > Replaced X-LITE in conf with BRAVIS useragent. > > Tested and did not work... > > undid step 4 and used X-LITE 4 for test... did not > > work either. > > I'm lost here. Any help appreciated. > > Thanks > > Jonathan > > > > > > ____________________________________________________________ > > > > Von: sr-users-boun...@lists.sip-router.org > > [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag > > von Peter Dunkley > > Gesendet: Donnerstag, 26. Januar 2012 15:38 > > An: SIP Router "- Kamailio (OpenSER) and SIP Express Router > > (SER) -Users Mailing "List > > Betreff: Re: [SR-Users] Enable application/pidf+xml > > > > > > > > Hello, > > > > I think that force_active affects the state of the SUBSCRIBE > > dialogs. So, a presentity does not have to explicitly > > authorise a watcher. This is not the same as automatically > > PUBLISH'ing presence state. I don't believe force_active > > will do what you want here as it has nothing to do with the > > body of the NOTIFY, just the Subscription-State: SIP header. > > > > Also, I think the problem could be that X-Lite supports > > peer-to-peer presence (where the clients exchange SUBSCRIBEs > > and NOTIFYs) but does not support server presence (where the > > SUBSCRIBEs are from the client to the server, NOTIFYs are > > from the server to the client, and the client must PUBLISH > > to the server). > > > > If you want the server to automatically PUBLISH for a client > > that does not support server presence (so online when you > > REGISTER and offline when you un-REGISTER) take a look a > > pua_usrloc. > > > > Regards, > > > > Peter > > > > > > -- > > Peter Dunkley > > Technical Director > > Crocodile RCS Ltd > > > > _______________________________________________ > > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users > > mailing list > > sr-users@lists.sip-router.org > > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > > > > > > > > > > > -- > > Carsten Bock > > CEO (Geschäftsführer) > > > > ng-voice GmbH > > Schomburgstr. 80 > > D-22767 Hamburg / Germany > > > > http://www.ng-voice.com > > mailto:cars...@ng-voice.com > > > > Mobile +49 179 2021244 > > Office +49 40 34927219 > > Fax +49 40 34927220 > > > > Sitz der Gesellschaft: Hamburg > > Registergericht: Amtsgericht Hamburg, HRB 120189 > > Geschäftsführer: Carsten Bock > > Ust-ID: DE279344284 > > > > Hier finden Sie unsere handelsrechtlichen Pflichtangaben: > > http://www.ng-voice.com/imprint/ > > > > > > _______________________________________________ > > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > > sr-users@lists.sip-router.org > > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Peter Dunkley > Technical Director > Crocodile RCS Ltd > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Peter Dunkley Technical Director Crocodile RCS Ltd
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
