Hello, great. I got presence... but only when I do not enable auth. Is there something I have to look out for when enabling auth I've take the stock config for 3.2.0 as packed in the ubuntu package from the website, implementet your changes and reinit the database. Apart from your changes I defined WITH_USRLOCDB, WITH_PRESENCE, WITH_AUTH, WITH_MYSQL. No presence with auth. Presence without auth. Cleared the db in between. Any hints Thanks Jonathan ________________________________
Von: sr-users-boun...@lists.sip-router.org [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von Peter Dunkley Gesendet: Freitag, 27. Januar 2012 18:07 An: SIP Router "- Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing "List Betreff: Re: [SR-Users] Sample pua_usrloc Config Was: Enableapplication/pidf+xml When I am using pua_usrloc... Modify the standard config: ... loadmodule "usrloc.so" loadmodule "pua.so" loadmodule "pua_usrloc.so" ... modparam("pua", "db_url", DBURL) modparam("pua", "outbound_proxy", "sip:127.0.0.1") modparam("pua_usrloc", "default_domain", "<<< whatever the domain your system has >>>") modparam("pua_usrloc", "entity_prefix", "sip") ... route[REGISTRAR] { if (is_method("REGISTER")) { pua_set_publish(); ... } ... You need to make sure Kamailio is listening on the loopback (127.0.0.1) device on port 5060, or change the pua outbound_proxy modparam to contain a real IP address and port that Kamailio is using. Setting this outbound_proxy parameter makes sure Kamailio routes the PUBLISH generated by pua/pua_usrloc through itself (so that it can be picked up and handle_publish() is called) instead of using DNS to try and route the request. Also make sure that the pua database table was created when you ran kamdbctl to set-up the database. Regards, Peter On Fri, 2012-01-27 at 15:04 +0100, Vogt, Jonathan wrote: Hi sorry, I guess I just got mixed up with all the name, merges, forks and mailinglists... As I started out with openser, tried kamailio and just compiled opensips, I would appreaciate a working sample for openser or kamailio aswell. I just need a sip server with presence support for bravis... which for itself does not seem to support server side presence... Thanks Jonathan ________________________________ Von: sr-users-boun...@lists.sip-router.org [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von Carsten Bock Gesendet: Freitag, 27. Januar 2012 14:55 An: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - UsersMailing List Betreff: Re: [SR-Users] Sample pua_usrloc Config Was: Enableapplication/pidf+xml Hi, this is the wrong mailing list: This Mailinglist is about OpenSER (the original), Kamailio, SER and sip-router.org - not OpenSIPS. If you have problems with an OpenSIPS configuration or module, please post it to the OpenSIPS-list. We can only provide help for our modules. Thank you, Carsten 2012/1/27 Vogt, Jonathan <j.v...@swp.de> Hello, could anyone kindly send me a working config which does support clients that not support server presence or send me a link to a working sample configuration. I seem unable to produce a working config myself. I have take the source from opensips.org and compiled it. Taken the conf from http://www.opensips.org/Resources/PuaUsrlocConfig replaced sip domain and ip and enabled auth Reset DB and created users Replaced X-LITE in conf with BRAVIS useragent. Tested and did not work... undid step 4 and used X-LITE 4 for test... did not work either. I'm lost here. Any help appreciated. Thanks Jonathan ________________________________ Von: sr-users-boun...@lists.sip-router.org [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von Peter Dunkley Gesendet: Donnerstag, 26. Januar 2012 15:38 An: SIP Router "- Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing "List Betreff: Re: [SR-Users] Enable application/pidf+xml Hello, I think that force_active affects the state of the SUBSCRIBE dialogs. So, a presentity does not have to explicitly authorise a watcher. This is not the same as automatically PUBLISH'ing presence state. I don't believe force_active will do what you want here as it has nothing to do with the body of the NOTIFY, just the Subscription-State: SIP header. Also, I think the problem could be that X-Lite supports peer-to-peer presence (where the clients exchange SUBSCRIBEs and NOTIFYs) but does not support server presence (where the SUBSCRIBEs are from the client to the server, NOTIFYs are from the server to the client, and the client must PUBLISH to the server). If you want the server to automatically PUBLISH for a client that does not support server presence (so online when you REGISTER and offline when you un-REGISTER) take a look a pua_usrloc. Regards, Peter -- Peter Dunkley Technical Director Crocodile RCS Ltd _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Carsten Bock CEO (Geschäftsführer) ng-voice GmbH Schomburgstr. 80 D-22767 Hamburg / Germany http://www.ng-voice.com mailto:cars...@ng-voice.com Mobile +49 179 2021244 Office +49 40 34927219 Fax +49 40 34927220 Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock Ust-ID: DE279344284 Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/ _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Peter Dunkley Technical Director Crocodile RCS Ltd
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
