Hi, tiny typo in my previous mail:
deb http://repository.ng-voice.com lenny main contrib non-free deb-src http://repository.ng-voice.com lenny main contrib non-free (no /ims in the repository URL) Kind regards, Carsten 2011/1/13 Carsten Bock <li...@bock.info>: > Hi Andrés, > > I have updated our repository. The packages are now signed, so you may > want to install the Key: > > wget http://repository.ng-voice.com/ngvoice-debian-gpg.key > apt-key add ngvoice-debian-gpg.key > > Then add our repository to your “/etc/apt/sources.list”: > > deb http://repository.ng-voice.com/ims lenny main contrib non-free > deb-src http://repository.ng-voice.com/ims lenny main contrib non-free > (they are for Debian Lenny only right now) > > Then you may simply install the Kamailio IMS Modules: > > apt-get install kamailio kamailio-ims-modules > (in order to update the packages, you need to remove kamailio (apt-get > remove kamailio), clean your local deb-cache (apt-get clean) and > reinstall the packages) > > The repository also contains other packages, such as: > - the RTP-Proxy (for the P-CSCF, package rtpproxy. latest stable version) > - the Fokus FHoSS HSS-Server (package openimscore-fhoss) > (all debian lenny only right now) > > I've made some installation notes here: > http://www.ng-voice.com/our-solution/installation/ > > The previous repository, i gave you in private mail (on our build > server) is no longer available, unless building packages or updating > our systems, the system is turned off. > > Kind regards, > Carsten > > 2011/1/10 "Andrés S. García Ruiz" <asgar...@um.es>: >> >> Hi Carsten, >> >> There are very good news!! I will be expecting the repository to be >> accessible in order to test it! >> >> Regards, >> Andrés. >> >> El 07/01/11 11:49, Carsten Bock escribió: >>> >>> Hi, >>> >>> the current status is following: >>> >>> => OpenIMS-Core: >>> - all OpenIMS module compile using Kamailio >>> - "make deb" (i have added "deb-lenny" and "deb-squeeze" targets as >>> well) will build the standard kamailio packages and a new >>> "kamailio-ims-modules" package >>> - You need to adapt the configuration of the OpenIMS-P-CSCF a little, >>> to make it work (basically change some paths); i will add a working >>> config next week >>> - so far, i did only test the P-CSCF-setup with Kamailio, tests of the >>> I-/S-CSCF-modules should will follow in the next days (+ i will add >>> configurations for those components to the branch) >>> - we have a testsetup in place, consisting of the "original" OpenIMS >>> P-/I- and S-CSCF, the Kamailio replacements, a presence/XCAP-server >>> (to make the setup more interesting, thanks to Daniel for his great >>> howto on asipto.com) and the FHoSS. All systems run on dedicated >>> (virtual) machines. >>> - as soon as there is more progress, i can make our repository for >>> debian lenny accessible from the outside world (it currently just has >>> a private IP) >>> >>> => OpenHSS.org (as a FHoSS-Replacement): >>> - a year ago, i started to develop a replacement for Java FHoSS: >>> openhss.org (which would be a direct port from the FHoSS to C with >>> CDP) >>> - due to personal changes (new job, 5 days a week a new city), i >>> "paused" the development >>> - But now, there is good news: I found someone, who will finish the >>> development: Brian "edge" Edginton >>> (http://www.ng-voice.com/our-team/brian/) >>> >>> The full roadmap can be found here: >>> http://www.ng-voice.com/our-solution/roadmap/ >>> (it contains such "ugly" points as add documentation ;-) ) >>> >>> The goal of the project is to create a stable, fast, open-source, >>> feature-rich IMS implementation based on Kamailio and the >>> OpenIMS-Core. >>> >>> For latest updates on our development, please visit our blog: >>> http://www.ng-voice.com/ >>> >>> Kind regards, >>> Carsten >>> >>> 2011/1/7 Daniel-Constantin Mierla<mico...@gmail.com>: >>>> >>>> Btw, fyi, Carsten Bock is working on Git branch 'cartenbock/ims' for >>>> making >>>> straightforward usage of openimscore modules with latest kamailio. If you >>>> are interested in this kind of platform, maybe you should fetch that >>>> branch, >>>> help testing and integration work. >>>> >>>> Cheers, >>>> Daniel >>>> >>>> On 12/3/10 10:56 AM, "Andrés S. García Ruiz" wrote: >>>>> >>>>> It works now! Thanks a lot! >>>>> >>>>> Regards, >>>>> Andrés. >>>>> >>>>> El 30/11/10 21:56, Daniel-Constantin Mierla escribió: >>>>>> >>>>>> Hello, >>>>>> >>>>>> the comments at the beginning of the configuration files tells you more >>>>>> about how some features are enabled/disabled. I assume you read them as >>>>>> you >>>>>> enabled authenitcation (by default is disabled) -- you have #!define >>>>>> WITH_AUTH. >>>>>> >>>>>> Maybe in your particular case the best solution is to enable IP >>>>>> authentication and add the IP address of OpenIMSCore in address table >>>>>> with >>>>>> group id 1. >>>>>> >>>>>> Cheers, >>>>>> Daniel >>>>>> >>>>>> On 11/29/10 3:27 PM, "Andrés S. García Ruiz" wrote: >>>>>>> >>>>>>> Thanks for your comment, >>>>>>> >>>>>>> This is my configuration, could you please tell me how to disable >>>>>>> authentication? >>>>>>> >>>>>>> #!KAMAILIO >>>>>>> # >>>>>>> # Kamailio (OpenSER) SIP Server v3.1 - default configuration script >>>>>>> # - web: http://www.kamailio.org >>>>>>> # - git: http://sip-router.org >>>>>>> # >>>>>>> # Direct your questions about this file to: >>>>>>> <sr-users@lists.sip-router.org> >>>>>>> # >>>>>>> # Refer to the Core CookBook at >>>>>>> http://www.kamailio.org/dokuwiki/doku.php >>>>>>> # for an explanation of possible statements, functions and parameters. >>>>>>> # >>>>>>> # Several features can be enabled using '#!define WITH_FEATURE' >>>>>>> directives: >>>>>>> # >>>>>>> # *** To run in debug mode: >>>>>>> # - define WITH_DEBUG >>>>>>> # >>>>>>> # *** To enable mysql: >>>>>>> # - define WITH_MYSQL >>>>>>> # >>>>>>> # *** To enable authentication execute: >>>>>>> # - enable mysql >>>>>>> # - define WITH_AUTH >>>>>>> # - add users using 'kamctl' >>>>>>> # >>>>>>> # *** To enable IP authentication execute: >>>>>>> # - enable mysql >>>>>>> # - enable authentication >>>>>>> # - define WITH_IPAUTH >>>>>>> # - add IP addresses with group id '1' to 'address' table >>>>>>> # >>>>>>> # *** To enable persistent user location execute: >>>>>>> # - enable mysql >>>>>>> # - define WITH_USRLOCDB >>>>>>> # >>>>>>> # *** To enable presence server execute: >>>>>>> # - enable mysql >>>>>>> # - define WITH_PRESENCE >>>>>>> # >>>>>>> # *** To enable nat traversal execute: >>>>>>> # - define WITH_NAT >>>>>>> # - install RTPProxy: http://www.rtpproxy.org >>>>>>> # - start RTPProxy: >>>>>>> # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 >>>>>>> # >>>>>>> # *** To enable PSTN gateway routing execute: >>>>>>> # - define WITH_PSTN >>>>>>> # - set the value of pstn.gw_ip >>>>>>> # - check route[PSTN] for regexp routing condition >>>>>>> # >>>>>>> # *** To enable database aliases lookup execute: >>>>>>> # - enable mysql >>>>>>> # - define WITH_ALIASDB >>>>>>> # >>>>>>> # *** To enable multi-domain support execute: >>>>>>> # - enable mysql >>>>>>> # - define WITH_MULTIDOMAIN >>>>>>> # >>>>>>> # *** To enable TLS support execute: >>>>>>> # - adjust CFGDIR/tls.cfg as needed >>>>>>> # - define WITH_TLS >>>>>>> # >>>>>>> # *** To enable XMLRPC support execute: >>>>>>> # - define WITH_XMLRPC >>>>>>> # - adjust route[XMLRPC] for access policy >>>>>>> # >>>>>>> # *** To enable anti-flood detection execute: >>>>>>> # - adjust pike and htable=>ipban settings as needed (default is >>>>>>> # block if more than 16 requests in 2 seconds and ban for 300 >>>>>>> seconds) >>>>>>> # - define WITH_ANTIFLOOD >>>>>>> # >>>>>>> # *** To enhance accounting execute: >>>>>>> # - enable mysql >>>>>>> # - define WITH_ACCDB >>>>>>> # - add following columns to database >>>>>>> #!ifdef ACCDB_COMMENT >>>>>>> ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; >>>>>>> ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT >>>>>>> ''; >>>>>>> ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; >>>>>>> ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; >>>>>>> ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT >>>>>>> ''; >>>>>>> ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL >>>>>>> DEFAULT ''; >>>>>>> ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL >>>>>>> DEFAULT ''; >>>>>>> ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL >>>>>>> DEFAULT ''; >>>>>>> ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL >>>>>>> DEFAULT ''; >>>>>>> ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL >>>>>>> DEFAULT ''; >>>>>>> #!endif >>>>>>> >>>>>>> ####### Defined Values ######### >>>>>>> >>>>>>> #!define WITH_DEBUG >>>>>>> #!define WITH_AUTH >>>>>>> #!define WITH_MYSQL >>>>>>> #!define WITH_USRLOCDB >>>>>>> >>>>>>> # *** Value defines - IDs used later in config >>>>>>> #!ifdef WITH_MYSQL >>>>>>> # - database URL - used to connect to database server by modules such >>>>>>> # as: auth_db, acc, usrloc, a.s.o. >>>>>>> #!define DBURL "mysql://openser:openserrw@localhost/openser" >>>>>>> #!endif >>>>>>> #!ifdef WITH_MULTIDOMAIN >>>>>>> # - the value for 'use_domain' parameters >>>>>>> #!define MULTIDOMAIN 1 >>>>>>> #!else >>>>>>> #!define MULTIDOMAIN 0 >>>>>>> #!endif >>>>>>> >>>>>>> # - flags >>>>>>> # FLT_ - per transaction (message) flags >>>>>>> # FLB_ - per branch flags >>>>>>> #!define FLT_ACC 1 >>>>>>> #!define FLT_ACCMISSED 2 >>>>>>> #!define FLT_ACCFAILED 3 >>>>>>> #!define FLT_NATS 5 >>>>>>> >>>>>>> #!define FLB_NATB 6 >>>>>>> #!define FLB_NATSIPPING 7 >>>>>>> >>>>>>> ####### Global Parameters ######### >>>>>>> >>>>>>> #!ifdef WITH_DEBUG >>>>>>> debug=4 >>>>>>> log_stderror=yes >>>>>>> #!else >>>>>>> debug=2 >>>>>>> log_stderror=no >>>>>>> #!endif >>>>>>> >>>>>>> memdbg=5 >>>>>>> memlog=5 >>>>>>> >>>>>>> log_facility=LOG_LOCAL0 >>>>>>> >>>>>>> fork=yes >>>>>>> children=4 >>>>>>> >>>>>>> /* uncomment the next line to disable TCP (default on) */ >>>>>>> #disable_tcp=yes >>>>>>> >>>>>>> >>>>>>> /* uncomment the next line to disable the auto discovery of local >>>>>>> aliases >>>>>>> based on reverse DNS on IPs (default on) */ >>>>>>> #auto_aliases=no >>>>>>> >>>>>>> /* add local domain aliases */ >>>>>>> alias="open-ims.test" >>>>>>> >>>>>>> /* uncomment and configure the following line if you want Kamailio to >>>>>>> bind on a specific interface/port/proto (default bind on all >>>>>>> available) */ >>>>>>> #listen=udp:10.0.0.10:5060 >>>>>>> >>>>>>> /* port to listen to >>>>>>> * - can be specified more than once if needed to listen on many ports >>>>>>> */ >>>>>>> port=5060 >>>>>>> >>>>>>> #!ifdef WITH_TLS >>>>>>> enable_tls=yes >>>>>>> #!endif >>>>>>> >>>>>>> ####### Custom Parameters ######### >>>>>>> >>>>>>> # These parameters can be modified runtime via RPC interface >>>>>>> # - see the documentation of 'cfg_rpc' module. >>>>>>> # >>>>>>> # Format: group.id = value 'desc' description >>>>>>> # Access: $sel(cfg_get.group.id) or @cfg_get.group.id >>>>>>> # >>>>>>> >>>>>>> #!ifdef WITH_PSTN >>>>>>> # PSTN GW Routing >>>>>>> # >>>>>>> # - pstn.gw_ip: valid IP or hostname as string value, example: >>>>>>> # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" >>>>>>> # >>>>>>> # - by default is empty to avoid misrouting >>>>>>> pstn.gw_ip = "" desc "PSTN GW Address" >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> ####### Modules Section ######## >>>>>>> >>>>>>> # set paths to location of modules >>>>>>> #!ifdef LOCAL_TEST_RUN >>>>>>> mpath="modules_k:modules" >>>>>>> #!else >>>>>>> >>>>>>> >>>>>>> mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_MYSQL >>>>>>> loadmodule "db_mysql.so" >>>>>>> #!endif >>>>>>> >>>>>>> loadmodule "mi_fifo.so" >>>>>>> loadmodule "kex.so" >>>>>>> loadmodule "tm.so" >>>>>>> loadmodule "tmx.so" >>>>>>> loadmodule "sl.so" >>>>>>> loadmodule "rr.so" >>>>>>> loadmodule "pv.so" >>>>>>> loadmodule "maxfwd.so" >>>>>>> loadmodule "usrloc.so" >>>>>>> loadmodule "registrar.so" >>>>>>> loadmodule "textops.so" >>>>>>> loadmodule "siputils.so" >>>>>>> loadmodule "xlog.so" >>>>>>> loadmodule "sanity.so" >>>>>>> loadmodule "ctl.so" >>>>>>> loadmodule "mi_rpc.so" >>>>>>> loadmodule "acc.so" >>>>>>> >>>>>>> #!ifdef WITH_AUTH >>>>>>> loadmodule "auth.so" >>>>>>> loadmodule "auth_db.so" >>>>>>> #!ifdef WITH_IPAUTH >>>>>>> loadmodule "permissions.so" >>>>>>> #!endif >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_ALIASDB >>>>>>> loadmodule "alias_db.so" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_MULTIDOMAIN >>>>>>> loadmodule "domain.so" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_PRESENCE >>>>>>> loadmodule "presence.so" >>>>>>> loadmodule "presence_xml.so" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_NAT >>>>>>> loadmodule "nathelper.so" >>>>>>> loadmodule "rtpproxy.so" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_TLS >>>>>>> loadmodule "tls.so" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_ANTIFLOOD >>>>>>> loadmodule "htable.so" >>>>>>> loadmodule "pike.so" >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_XMLRPC >>>>>>> loadmodule "xmlrpc.so" >>>>>>> #!endif >>>>>>> >>>>>>> # ----------------- setting module-specific parameters --------------- >>>>>>> >>>>>>> >>>>>>> # ----- mi_fifo params ----- >>>>>>> modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") >>>>>>> >>>>>>> >>>>>>> # ----- tm params ----- >>>>>>> # auto-discard branches from previous serial forking leg >>>>>>> modparam("tm", "failure_reply_mode", 3) >>>>>>> # default retransmission timeout: 30sec >>>>>>> modparam("tm", "fr_timer", 30000) >>>>>>> # default invite retransmission timeout after 1xx: 120sec >>>>>>> modparam("tm", "fr_inv_timer", 120000) >>>>>>> >>>>>>> >>>>>>> # ----- rr params ----- >>>>>>> # add value to ;lr param to cope with most of the UAs >>>>>>> modparam("rr", "enable_full_lr", 1) >>>>>>> # do not append from tag to the RR (no need for this script) >>>>>>> modparam("rr", "append_fromtag", 0) >>>>>>> >>>>>>> >>>>>>> # ----- registrar params ----- >>>>>>> modparam("registrar", "method_filtering", 1) >>>>>>> /* uncomment the next line to disable parallel forking via location */ >>>>>>> # modparam("registrar", "append_branches", 0) >>>>>>> /* uncomment the next line not to allow more than 10 contacts per AOR >>>>>>> */ >>>>>>> #modparam("registrar", "max_contacts", 10) >>>>>>> >>>>>>> >>>>>>> # ----- acc params ----- >>>>>>> /* what special events should be accounted ? */ >>>>>>> modparam("acc", "early_media", 0) >>>>>>> modparam("acc", "report_ack", 0) >>>>>>> modparam("acc", "report_cancels", 0) >>>>>>> /* by default ww do not adjust the direct of the sequential requests. >>>>>>> if you enable this parameter, be sure the enable "append_fromtag" >>>>>>> in "rr" module */ >>>>>>> modparam("acc", "detect_direction", 0) >>>>>>> /* account triggers (flags) */ >>>>>>> modparam("acc", "log_flag", FLT_ACC) >>>>>>> modparam("acc", "log_missed_flag", FLT_ACCMISSED) >>>>>>> modparam("acc", "log_extra", >>>>>>> >>>>>>> >>>>>>> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") >>>>>>> modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) >>>>>>> /* enhanced DB accounting */ >>>>>>> #!ifdef WITH_ACCDB >>>>>>> modparam("acc", "db_flag", FLT_ACC) >>>>>>> modparam("acc", "db_missed_flag", FLT_ACCMISSED) >>>>>>> modparam("acc", "db_url", DBURL) >>>>>>> modparam("acc", "db_extra", >>>>>>> >>>>>>> >>>>>>> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> # ----- usrloc params ----- >>>>>>> /* enable DB persistency for location entries */ >>>>>>> #!ifdef WITH_USRLOCDB >>>>>>> modparam("usrloc", "db_url", DBURL) >>>>>>> modparam("usrloc", "db_mode", 2) >>>>>>> modparam("usrloc", "use_domain", MULTIDOMAIN) >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> # ----- auth_db params ----- >>>>>>> #!ifdef WITH_AUTH >>>>>>> modparam("auth_db", "db_url", DBURL) >>>>>>> modparam("auth_db", "calculate_ha1", yes) >>>>>>> modparam("auth_db", "password_column", "password") >>>>>>> modparam("auth_db", "load_credentials", "") >>>>>>> modparam("auth_db", "use_domain", MULTIDOMAIN) >>>>>>> >>>>>>> # ----- permissions params ----- >>>>>>> #!ifdef WITH_IPAUTH >>>>>>> modparam("permissions", "db_url", DBURL) >>>>>>> modparam("permissions", "db_mode", 1) >>>>>>> #!endif >>>>>>> >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> # ----- alias_db params ----- >>>>>>> #!ifdef WITH_ALIASDB >>>>>>> modparam("alias_db", "db_url", DBURL) >>>>>>> modparam("alias_db", "use_domain", MULTIDOMAIN) >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> # ----- domain params ----- >>>>>>> #!ifdef WITH_MULTIDOMAIN >>>>>>> modparam("domain", "db_url", DBURL) >>>>>>> # use caching >>>>>>> modparam("domain", "db_mode", 1) >>>>>>> # register callback to match myself condition with domains list >>>>>>> modparam("domain", "register_myself", 1) >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> #!ifdef WITH_PRESENCE >>>>>>> # ----- presence params ----- >>>>>>> modparam("presence", "db_url", DBURL) >>>>>>> >>>>>>> # ----- presence_xml params ----- >>>>>>> modparam("presence_xml", "db_url", DBURL) >>>>>>> modparam("presence_xml", "force_active", 1) >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> #!ifdef WITH_NAT >>>>>>> # ----- rtpproxy params ----- >>>>>>> modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") >>>>>>> >>>>>>> # ----- nathelper params ----- >>>>>>> modparam("nathelper", "natping_interval", 30) >>>>>>> modparam("nathelper", "ping_nated_only", 1) >>>>>>> modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) >>>>>>> modparam("nathelper", "sipping_from", "sip:pin...@kamailio.org") >>>>>>> >>>>>>> # params needed for NAT traversal in other modules >>>>>>> modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") >>>>>>> modparam("usrloc", "nat_bflag", FLB_NATB) >>>>>>> #!endif >>>>>>> >>>>>>> >>>>>>> #!ifdef WITH_TLS >>>>>>> # ----- tls params ----- >>>>>>> modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_ANTIFLOOD >>>>>>> # ----- pike params ----- >>>>>>> modparam("pike", "sampling_time_unit", 2) >>>>>>> modparam("pike", "reqs_density_per_unit", 16) >>>>>>> modparam("pike", "remove_latency", 4) >>>>>>> >>>>>>> # ----- htable params ----- >>>>>>> # ip ban htable with autoexpire after 5 minutes >>>>>>> modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") >>>>>>> #!endif >>>>>>> >>>>>>> #!ifdef WITH_XMLRPC >>>>>>> # ----- xmlrpc params ----- >>>>>>> modparam("xmlrpc", "route", "XMLRPC"); >>>>>>> modparam("xmlrpc", "url_match", "^/RPC") >>>>>>> #!endif >>>>>>> >>>>>>> ####### Routing Logic ######## >>>>>>> >>>>>>> >>>>>>> # Main SIP request routing logic >>>>>>> # - processing of any incoming SIP request starts with this route >>>>>>> route { >>>>>>> >>>>>>> # per request initial checks >>>>>>> route(REQINIT); >>>>>>> >>>>>>> # NAT detection >>>>>>> route(NAT); >>>>>>> >>>>>>> # handle requests within SIP dialogs >>>>>>> route(WITHINDLG); >>>>>>> >>>>>>> ### only initial requests (no To tag) >>>>>>> >>>>>>> # CANCEL processing >>>>>>> if (is_method("CANCEL")) >>>>>>> { >>>>>>> if (t_check_trans()) >>>>>>> t_relay(); >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> t_check_trans(); >>>>>>> >>>>>>> # authentication >>>>>>> route(AUTH); >>>>>>> >>>>>>> # record routing for dialog forming requests (in case they are >>>>>>> routed) >>>>>>> # - remove preloaded route headers >>>>>>> remove_hf("Route"); >>>>>>> if (is_method("INVITE|SUBSCRIBE")) >>>>>>> record_route(); >>>>>>> >>>>>>> # account only INVITEs >>>>>>> if (is_method("INVITE")) >>>>>>> { >>>>>>> setflag(FLT_ACC); # do accounting >>>>>>> } >>>>>>> >>>>>>> # dispatch requests to foreign domains >>>>>>> route(SIPOUT); >>>>>>> >>>>>>> ### requests for my local domains >>>>>>> >>>>>>> # handle presence related requests >>>>>>> route(PRESENCE); >>>>>>> >>>>>>> # handle registrations >>>>>>> route(REGISTRAR); >>>>>>> >>>>>>> if ($rU==$null) >>>>>>> { >>>>>>> # request with no Username in RURI >>>>>>> sl_send_reply("484","Address Incomplete"); >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> # dispatch destinations to PSTN >>>>>>> route(PSTN); >>>>>>> >>>>>>> # user location service >>>>>>> route(LOCATION); >>>>>>> >>>>>>> route(RELAY); >>>>>>> } >>>>>>> >>>>>>> >>>>>>> route[RELAY] { >>>>>>> #!ifdef WITH_NAT >>>>>>> if (check_route_param("nat=yes")) { >>>>>>> setbflag(FLB_NATB); >>>>>>> } >>>>>>> if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { >>>>>>> route(RTPPROXY); >>>>>>> } >>>>>>> #!endif >>>>>>> >>>>>>> /* example how to enable some additional event routes */ >>>>>>> if (is_method("INVITE")) { >>>>>>> #t_on_branch("BRANCH_ONE"); >>>>>>> t_on_reply("REPLY_ONE"); >>>>>>> t_on_failure("FAIL_ONE"); >>>>>>> } >>>>>>> >>>>>>> if (!t_relay()) { >>>>>>> sl_reply_error(); >>>>>>> } >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> # Per SIP request initial checks >>>>>>> route[REQINIT] { >>>>>>> #!ifdef WITH_ANTIFLOOD >>>>>>> # flood dection from same IP and traffic ban for a while >>>>>>> # be sure you exclude checking trusted peers, such as pstn gateways >>>>>>> # - local host excluded (e.g., loop to self) >>>>>>> if(src_ip!=myself) >>>>>>> { >>>>>>> if($sht(ipban=>$si)!=$null) >>>>>>> { >>>>>>> # ip is already blocked >>>>>>> xdbg("request from blocked IP - $rm from $fu >>>>>>> (IP:$si:$sp)\n"); >>>>>>> exit; >>>>>>> } >>>>>>> if (!pike_check_req()) >>>>>>> { >>>>>>> xlog("L_ALERT","ALERT: pike blocking $rm from $fu >>>>>>> (IP:$si:$sp)\n"); >>>>>>> $sht(ipban=>$si) = 1; >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> #!endif >>>>>>> >>>>>>> if (!mf_process_maxfwd_header("10")) { >>>>>>> sl_send_reply("483","Too Many Hops"); >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> if(!sanity_check("1511", "7")) >>>>>>> { >>>>>>> xlog("Malformed SIP message from $si:$sp\n"); >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> # Handle requests within SIP dialogs >>>>>>> route[WITHINDLG] { >>>>>>> if (has_totag()) { >>>>>>> # sequential request withing a dialog should >>>>>>> # take the path determined by record-routing >>>>>>> if (loose_route()) { >>>>>>> if (is_method("BYE")) { >>>>>>> setflag(FLT_ACC); # do accounting ... >>>>>>> setflag(FLT_ACCFAILED); # ... even if the transaction >>>>>>> fails >>>>>>> } >>>>>>> route(RELAY); >>>>>>> } else { >>>>>>> if (is_method("SUBSCRIBE")&& uri == myself) { >>>>>>> # in-dialog subscribe requests >>>>>>> route(PRESENCE); >>>>>>> exit; >>>>>>> } >>>>>>> if ( is_method("ACK") ) { >>>>>>> if ( t_check_trans() ) { >>>>>>> # no loose-route, but stateful ACK; >>>>>>> # must be an ACK after a 487 >>>>>>> # or e.g. 404 from upstream server >>>>>>> t_relay(); >>>>>>> exit; >>>>>>> } else { >>>>>>> # ACK without matching transaction ... ignore and >>>>>>> discard >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> sl_send_reply("404","Not here"); >>>>>>> } >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> # Handle SIP registrations >>>>>>> route[REGISTRAR] { >>>>>>> if (is_method("REGISTER")) >>>>>>> { >>>>>>> if(isflagset(FLT_NATS)) >>>>>>> { >>>>>>> setbflag(FLB_NATB); >>>>>>> # uncomment next line to do SIP NAT pinging >>>>>>> ## setbflag(FLB_NATSIPPING); >>>>>>> } >>>>>>> if (!save("location")) >>>>>>> sl_reply_error(); >>>>>>> >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> # USER location service >>>>>>> route[LOCATION] { >>>>>>> >>>>>>> #!ifdef WITH_ALIASDB >>>>>>> # search in DB-based aliases >>>>>>> alias_db_lookup("dbaliases"); >>>>>>> #!endif >>>>>>> >>>>>>> if (!lookup("location")) { >>>>>>> switch ($rc) { >>>>>>> case -1: >>>>>>> case -3: >>>>>>> t_newtran(); >>>>>>> t_reply("404", "Not Found"); >>>>>>> exit; >>>>>>> case -2: >>>>>>> sl_send_reply("405", "Method Not Allowed"); >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> # when routing via usrloc, log the missed calls also >>>>>>> if (is_method("INVITE")) >>>>>>> { >>>>>>> setflag(FLT_ACCMISSED); >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> # Presence server route >>>>>>> route[PRESENCE] { >>>>>>> if(!is_method("PUBLISH|SUBSCRIBE")) >>>>>>> return; >>>>>>> >>>>>>> #!ifdef WITH_PRESENCE >>>>>>> if (!t_newtran()) >>>>>>> { >>>>>>> sl_reply_error(); >>>>>>> exit; >>>>>>> }; >>>>>>> >>>>>>> if(is_method("PUBLISH")) >>>>>>> { >>>>>>> if($hdr(Sender)!= NULL) >>>>>>> handle_publish("$hdr(Sender)"); >>>>>>> else >>>>>>> handle_publish(""); >>>>>>> t_release(); >>>>>>> } >>>>>>> else >>>>>>> if( is_method("SUBSCRIBE")) >>>>>>> { >>>>>>> handle_subscribe(); >>>>>>> t_release(); >>>>>>> } >>>>>>> exit; >>>>>>> #!endif >>>>>>> >>>>>>> # if presence enabled, this part will not be executed >>>>>>> if (is_method("PUBLISH") || $rU==$null) >>>>>>> { >>>>>>> sl_send_reply("404", "Not here"); >>>>>>> exit; >>>>>>> } >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> # Authentication route >>>>>>> route[AUTH] { >>>>>>> #!ifdef WITH_AUTH >>>>>>> if (is_method("REGISTER")) >>>>>>> { >>>>>>> # authenticate the REGISTER requests (uncomment to enable auth) >>>>>>> if (!www_authorize("$td", "subscriber")) >>>>>>> { >>>>>>> www_challenge("$td", "0"); >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> if ($au!=$tU) >>>>>>> { >>>>>>> sl_send_reply("403","Forbidden auth ID"); >>>>>>> exit; >>>>>>> } >>>>>>> } else { >>>>>>> >>>>>>> #!ifdef WITH_IPAUTH >>>>>>> if(allow_source_address()) >>>>>>> { >>>>>>> # source IP allowed >>>>>>> return; >>>>>>> } >>>>>>> #!endif >>>>>>> # authenticate if from local subscriber >>>>>>> if (from_uri==myself) >>>>>>> { >>>>>>> if (!proxy_authorize("$fd", "subscriber")) { >>>>>>> proxy_challenge("$fd", "0"); >>>>>>> exit; >>>>>>> } >>>>>>> if (is_method("PUBLISH")) >>>>>>> { >>>>>>> if ($au!=$tU) { >>>>>>> sl_send_reply("403","Forbidden auth ID"); >>>>>>> exit; >>>>>>> } >>>>>>> } else { >>>>>>> if ($au!=$fU) { >>>>>>> sl_send_reply("403","Forbidden auth ID"); >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> consume_credentials(); >>>>>>> # caller authenticated >>>>>>> } else { >>>>>>> # caller is not local subscriber, then check if it calls >>>>>>> # a local destination, otherwise deny, not an open relay >>>>>>> here >>>>>>> if (!uri==myself) >>>>>>> { >>>>>>> sl_send_reply("403","Not relaying"); >>>>>>> exit; >>>>>>> } >>>>>>> } >>>>>>> } >>>>>>> #!endif >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> # Caller NAT detection route >>>>>>> route[NAT] { >>>>>>> #!ifdef WITH_NAT >>>>>>> force_rport(); >>>>>>> if (nat_uac_test("19")) { >>>>>>> if (method=="REGISTER") { >>>>>>> fix_nated_register(); >>>>>>> } else { >>>>>>> fix_nated_contact(); >>>>>>> } >>>>>>> setflag(FLT_NATS); >>>>>>> } >>>>>>> #!endif >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> # RTPProxy control >>>>>>> route[RTPPROXY] { >>>>>>> #!ifdef WITH_NAT >>>>>>> if (is_method("BYE")) { >>>>>>> unforce_rtp_proxy(); >>>>>>> } else if (is_method("INVITE")){ >>>>>>> force_rtp_proxy(); >>>>>>> } >>>>>>> if (!has_totag()) add_rr_param(";nat=yes"); >>>>>>> #!endif >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> # Routing to foreign domains >>>>>>> route[SIPOUT] { >>>>>>> if (!uri==myself) >>>>>>> { >>>>>>> append_hf("P-hint: outbound\r\n"); >>>>>>> route(RELAY); >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> # PSTN GW routing >>>>>>> route[PSTN] { >>>>>>> #!ifdef WITH_PSTN >>>>>>> # check if PSTN GW IP is defined >>>>>>> if (strempty($sel(cfg_get.pstn.gw_ip))) { >>>>>>> xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not >>>>>>> defined\n"); >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> # route to PSTN dialed numbers starting with '+' or '00' >>>>>>> # (international format) >>>>>>> # - update the condition to match your dialing rules for PSTN >>>>>>> routing >>>>>>> if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) >>>>>>> return; >>>>>>> >>>>>>> # only local users allowed to call >>>>>>> if(from_uri!=myself) { >>>>>>> sl_send_reply("403", "Not Allowed"); >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); >>>>>>> >>>>>>> route(RELAY); >>>>>>> exit; >>>>>>> #!endif >>>>>>> >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> # XMLRPC routing >>>>>>> #!ifdef WITH_XMLRPC >>>>>>> route[XMLRPC] >>>>>>> { >>>>>>> # allow XMLRPC from localhost >>>>>>> if ((method=="POST" || method=="GET") >>>>>>> && (src_ip==127.0.0.1)) { >>>>>>> # close connection only for xmlrpclib user agents (there is a >>>>>>> bug >>>>>>> in >>>>>>> # xmlrpclib: it waits for EOF before interpreting the >>>>>>> response). >>>>>>> if ($hdr(User-Agent) =~ "xmlrpclib") >>>>>>> set_reply_close(); >>>>>>> set_reply_no_connect(); >>>>>>> dispatch_rpc(); >>>>>>> exit; >>>>>>> } >>>>>>> send_reply("403", "Forbidden"); >>>>>>> exit; >>>>>>> } >>>>>>> #!endif >>>>>>> >>>>>>> # Sample branch router >>>>>>> branch_route[BRANCH_ONE] { >>>>>>> xdbg("new branch at $ru\n"); >>>>>>> } >>>>>>> >>>>>>> # Sample onreply route >>>>>>> onreply_route[REPLY_ONE] { >>>>>>> xdbg("incoming reply\n"); >>>>>>> #!ifdef WITH_NAT >>>>>>> if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) >>>>>>> && status=~"(183)|(2[0-9][0-9])") { >>>>>>> force_rtp_proxy(); >>>>>>> } >>>>>>> if (isbflagset("6")) { >>>>>>> fix_nated_contact(); >>>>>>> } >>>>>>> #!endif >>>>>>> } >>>>>>> >>>>>>> # Sample failure route >>>>>>> failure_route[FAIL_ONE] { >>>>>>> #!ifdef WITH_NAT >>>>>>> if (is_method("INVITE") >>>>>>> && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { >>>>>>> unforce_rtp_proxy(); >>>>>>> } >>>>>>> #!endif >>>>>>> >>>>>>> if (t_is_canceled()) { >>>>>>> exit; >>>>>>> } >>>>>>> >>>>>>> # uncomment the following lines if you want to block client >>>>>>> # redirect based on 3xx replies. >>>>>>> ##if (t_check_status("3[0-9][0-9]")) { >>>>>>> ##t_reply("404","Not found"); >>>>>>> ## exit; >>>>>>> ##} >>>>>>> >>>>>>> # uncomment the following lines if you want to redirect the failed >>>>>>> # calls to a different new destination >>>>>>> ##if (t_check_status("486|408")) { >>>>>>> ## sethostport("192.168.2.100:5060"); >>>>>>> ## append_branch(); >>>>>>> ## # do not set the missed call flag again >>>>>>> ## t_relay(); >>>>>>> ##} >>>>>>> } >>>>>>> >>>>>>> >>>>>>> Thanks a lot, >>>>>>> Andrés. >>>>>>> >>>>>>> El 29/11/2010 15:15, Klaus Darilion escribió: >>>>>>>> >>>>>>>> If you do not want to authenticate the requests then disable >>>>>>>> authentication kamailio.cfg >>>>>>>> >>>>>>>> regards >>>>>>>> Klaus >>>>>>>> >>>>>>>> Am 29.11.2010 12:53, schrieb "Andrés S. García Ruiz": >>>>>>>>> >>>>>>>>> Hi everybody, >>>>>>>>> >>>>>>>>> I'm trying to deploy an IMS network with OpenIMSCore and Kamailio. >>>>>>>>> Since >>>>>>>>> OpenIMSCore has been already tested along with Mobicents, now I want >>>>>>>>> substitute Mobicents for Kamailio. I've also successfully installed >>>>>>>>> Kamailio. I can run it without any problem, but when SIP Publish >>>>>>>>> messages arrive at Kamalio, it answers with "407 Proxy >>>>>>>>> Authentication >>>>>>>>> Required". The IMS presentity is already registered against the >>>>>>>>> OpenIMSCore. How can I solve that problem? >>>>>>>>> >>>>>>>>> The publish message sent: >>>>>>>>> >>>>>>>>> PUBLISH sip:testuse...@open-ims.test SIP/2.0 >>>>>>>>> Route:<sip:ciervo.inf.um.es:5060;lr>, >>>>>>>>> >>>>>>>>> >>>>>>>>> <sip:iscm...@scscf.open-ims.test:6060;lr;s=1;h=0;d=0;a=7369703a74657374757365723031406f70656e2d696d732e74657374> >>>>>>>>> >>>>>>>>> Call-ID: K28QO9PYAE5vn3RNdYOkIEddMEd6yDiqeAW7DwSt6XV. >>>>>>>>> CSeq: 1 PUBLISH >>>>>>>>> From: "testuser01"<sip:testuse...@open-ims.test>;tag=ff123bda >>>>>>>>> To: "testuser01"<sip:testuse...@open-ims.test> >>>>>>>>> Via: SIP/2.0/UDP 155.54.210.135:6060;branch=z9hG4bKa31a.6cba1cd2.0 >>>>>>>>> Via: SIP/2.0/UDP >>>>>>>>> 155.54.210.134:4060;branch=z9hG4bKa31a.71481d13.0;i=1 >>>>>>>>> Via: SIP/2.0/TCP >>>>>>>>> >>>>>>>>> >>>>>>>>> 155.54.190.166:8060;rport=41624;branch=z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z- >>>>>>>>> >>>>>>>>> Max-Forwards: 15 >>>>>>>>> Content-Type: application/pidf+xml >>>>>>>>> Expires: 30000 >>>>>>>>> Event: presence >>>>>>>>> Contact:<sip:testuser01@155.54.190.166:8060> >>>>>>>>> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, >>>>>>>>> SUBSCRIBE, INFO >>>>>>>>> User-Agent: X-Lite IMS-OSGi-Client 0.1 >>>>>>>>> CVS-Mon_Nov_29_10-14-33_CET_2010 >>>>>>>>> Content-Length: 451 >>>>>>>>> P-Asserted-Identity:<sip:testuse...@open-ims.test> >>>>>>>>> P-Charging-Vector: >>>>>>>>> >>>>>>>>> >>>>>>>>> icid-value="P-CSCFabcd000000004cf3708400000002";icid-generated-at=155.54.210.134;orig-ioi="open-ims.test" >>>>>>>>> >>>>>>>>> >>>>>>>>> <?xml version='1.0' encoding='UTF-8'?><presence >>>>>>>>> xmlns='urn:ietf:params:xml:ns:pidf' >>>>>>>>> xmlns:c='urn:ietf:params:xml:ns:pidf:cipid' >>>>>>>>> xmlns:dm='urn:ietf:params:xml:ns:pidf:data-model' >>>>>>>>> xmlns:rpid='urn:ietf:params:xml:ns:pidf:rpid' >>>>>>>>> entity='sip:testuse...@open-ims.test'><tuple >>>>>>>>> >>>>>>>>> id='t6b9a6ab3'><status><basic>open</basic></status></tuple><dm:person >>>>>>>>> >>>>>>>>> >>>>>>>>> id='p34b126e5'><rpid:activities><rpid:Online/></rpid:activities><dm:note>Online</dm:note></dm:person></presence> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Kamailio answer: >>>>>>>>> SIP/2.0 407 Proxy Authentication Required >>>>>>>>> Call-ID: K28QO9PYAE5vn3RNdYOkIEddMEd6yDiqeAW7DwSt6XV. >>>>>>>>> CSeq: 1 PUBLISH >>>>>>>>> From: "testuser01"<sip:testuse...@open-ims.test>;tag=ff123bda >>>>>>>>> To: "testuser01" >>>>>>>>> >>>>>>>>> >>>>>>>>> <sip:testuse...@open-ims.test>;tag=b27e1a1d33761e85846fc98f5f3a7e58.3d3a >>>>>>>>> Via: SIP/2.0/UDP 155.54.210.135:6060;branch=z9hG4bKa31a.6cba1cd2.0 >>>>>>>>> Via: SIP/2.0/UDP >>>>>>>>> 155.54.210.134:4060;branch=z9hG4bKa31a.71481d13.0;i=1 >>>>>>>>> Via: SIP/2.0/TCP >>>>>>>>> >>>>>>>>> >>>>>>>>> 155.54.190.166:8060;rport=41624;branch=z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z- >>>>>>>>> >>>>>>>>> Proxy-Authenticate: Digest realm="open-ims.test", >>>>>>>>> nonce="TPNwMkzzbwZRE1piAM8yHaXGsXvwS16v" >>>>>>>>> Server: kamailio (3.1.0 (i386/linux)) >>>>>>>>> Content-Length: 0 >>>>>>>>> >>>>>>>>> >>>>>>>>> Kamailio log: >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:628]: SIP Request: >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:630]: method:<PUBLISH> >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:632]: uri: >>>>>>>>> <sip:testuse...@open-ims.test> >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:634]: version:<SIP/2.0> >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:165]: get_hdr_field: >>>>>>>>> cseq >>>>>>>>> <CSeq>:<1> <PUBLISH> >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_to.c:803]: end of header >>>>>>>>> reached, >>>>>>>>> state=10 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:185]: DEBUG: >>>>>>>>> get_hdr_field: >>>>>>>>> <To> [45]; uri=[sip:testuse...@open-ims.test] >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:187]: DEBUG: to body >>>>>>>>> ["testuser01"<sip:testuse...@open-ims.test> >>>>>>>>> ] >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>>> 232, >>>>>>>>> <branch> =<z9hG4bKa31a.6cba1cd2.0>; state=16 >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:2300]: end of header >>>>>>>>> reached, >>>>>>>>> state=5 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:513]: parse_headers: Via >>>>>>>>> found, flags=2 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:515]: parse_headers: >>>>>>>>> this >>>>>>>>> is >>>>>>>>> the first via >>>>>>>>> 5(15391) DEBUG:<core> [receive.c:145]: After parse_msg... >>>>>>>>> 5(15391) DEBUG:<core> [receive.c:186]: preparing to run routing >>>>>>>>> scripts... >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>>> 232, >>>>>>>>> <branch> =<z9hG4bKa31a.71481d13.0>; state=6 >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>>> 236, >>>>>>>>> <i> =<1>; state=16 >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:2300]: end of header >>>>>>>>> reached, >>>>>>>>> state=5 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:513]: parse_headers: Via >>>>>>>>> found, flags=100 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:526]: parse_headers: >>>>>>>>> this >>>>>>>>> is >>>>>>>>> the second via >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>>> 235, >>>>>>>>> <rport> =<41624>; state=6 >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>>> 232, >>>>>>>>> <branch> =<z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z->; state=16 >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:2300]: end of header >>>>>>>>> reached, >>>>>>>>> state=5 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:513]: parse_headers: Via >>>>>>>>> found, flags=100 >>>>>>>>> 5(15391) DEBUG: maxfwd [mf_funcs.c:85]: value = 15 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:199]: DEBUG: >>>>>>>>> get_hdr_body >>>>>>>>> : >>>>>>>>> content_length=451 >>>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:101]: found end of >>>>>>>>> header >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_to.c:174]: DEBUG: add_param: >>>>>>>>> tag=ff123bda >>>>>>>>> 5(15391) DEBUG:<core> [parser/parse_to.c:803]: end of header >>>>>>>>> reached, >>>>>>>>> state=29 >>>>>>>>> 5(15391) DEBUG: sanity [mod_sanity.c:217]: all sanity checks passed >>>>>>>>> 5(15391) DEBUG: siputils [checks.c:73]: no totag >>>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:1081]: DEBUG: t_check_msg: msg id=1 >>>>>>>>> global id=0 T start=0xffffffff >>>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:528]: t_lookup_request: start >>>>>>>>> searching: >>>>>>>>> hash=41274, isACK=0 >>>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:485]: DEBUG: RFC3261 transaction >>>>>>>>> matching >>>>>>>>> failed >>>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:711]: DEBUG: t_lookup_request: no >>>>>>>>> transaction found >>>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:1150]: DEBUG: t_check_msg: msg id=1 >>>>>>>>> global id=1 T end=(nil) >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> host==us: 13==9&& [open-ims.test] == [127.0.0.1] >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> port 5060 matches port 5060 >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> host==us: 13==14&& [open-ims.test] == [155.54.190.245] >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> port 5060 matches port 5060 >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> host==us: 13==9&& [open-ims.test] == [127.0.0.1] >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> port 5060 matches port 5060 >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> host==us: 13==14&& [open-ims.test] == [155.54.190.245] >>>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>>> checking >>>>>>>>> if >>>>>>>>> port 5060 matches port 5060 >>>>>>>>> 5(15391) DEBUG: auth_db [authorize.c:239]: realm value >>>>>>>>> [open-ims.test] >>>>>>>>> 5(15391) DEBUG: auth [api.c:85]: auth:pre_auth: Credentials with >>>>>>>>> realm >>>>>>>>> 'open-ims.test' not found >>>>>>>>> 5(15391) DEBUG: auth_db [authorize.c:257]: not authenticated >>>>>>>>> 5(15391) DEBUG: auth [challenge.c:102]: build_challenge_hf: >>>>>>>>> realm='open-ims.test' >>>>>>>>> 5(15391) DEBUG: auth [challenge.c:236]: auth: 'Proxy-Authenticate: >>>>>>>>> Digest realm="open-ims.test", >>>>>>>>> nonce="TPNwMkzzbwZRE1piAM8yHaXGsXvwS16v" >>>>>>>>> ' >>>>>>>>> 5(15391) DEBUG: sl [sl.c:278]: reply in stateless mode (sl) >>>>>>>>> 5(15391) DEBUG:<core> [msg_translator.c:207]: >>>>>>>>> check_via_address(155.54.210.135, 155.54.210.135, 0) >>>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>>> destroying list (nil) >>>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>>> destroying list (nil) >>>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>>> destroying list (nil) >>>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>>> destroying list (nil) >>>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>>> destroying list (nil) >>>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>>> destroying list (nil) >>>>>>>>> 5(15391) DEBUG:<core> [receive.c:289]: receive_msg: cleaning up >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks in advance, >>>>>>>>> Andrés. >>>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>>>>> list >>>>>>> sr-users@lists.sip-router.org >>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>>> >>>>> _______________________________________________ >>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>>> sr-users@lists.sip-router.org >>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> -- >>>> Daniel-Constantin Mierla >>>> Kamailio (OpenSER) Advanced Training >>>> Jan 24-26, 2011, Irvine, CA, USA >>>> http://www.asipto.com >>>> >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>> >>> >> >> > > > > -- > Carsten Bock > Schomburgstr. 80 > 22767 Hamburg > Germany > > Mobile +49 179 2021244 > Home +49 40 34927217 > Büro (Verl) +49 5246 801427 > Fax +49 40 34927218 > mailto:cars...@bock.info > -- Carsten Bock Schomburgstr. 80 22767 Hamburg Germany Mobile +49 179 2021244 Home +49 40 34927217 Büro (Verl) +49 5246 801427 Fax +49 40 34927218 mailto:cars...@bock.info _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
