Hi Andrés, I have updated our repository. The packages are now signed, so you may want to install the Key:
wget http://repository.ng-voice.com/ngvoice-debian-gpg.key apt-key add ngvoice-debian-gpg.key Then add our repository to your “/etc/apt/sources.list”: deb http://repository.ng-voice.com/ims lenny main contrib non-free deb-src http://repository.ng-voice.com/ims lenny main contrib non-free (they are for Debian Lenny only right now) Then you may simply install the Kamailio IMS Modules: apt-get install kamailio kamailio-ims-modules (in order to update the packages, you need to remove kamailio (apt-get remove kamailio), clean your local deb-cache (apt-get clean) and reinstall the packages) The repository also contains other packages, such as: - the RTP-Proxy (for the P-CSCF, package rtpproxy. latest stable version) - the Fokus FHoSS HSS-Server (package openimscore-fhoss) (all debian lenny only right now) I've made some installation notes here: http://www.ng-voice.com/our-solution/installation/ The previous repository, i gave you in private mail (on our build server) is no longer available, unless building packages or updating our systems, the system is turned off. Kind regards, Carsten 2011/1/10 "Andrés S. García Ruiz" <asgar...@um.es>: > > Hi Carsten, > > There are very good news!! I will be expecting the repository to be > accessible in order to test it! > > Regards, > Andrés. > > El 07/01/11 11:49, Carsten Bock escribió: >> >> Hi, >> >> the current status is following: >> >> => OpenIMS-Core: >> - all OpenIMS module compile using Kamailio >> - "make deb" (i have added "deb-lenny" and "deb-squeeze" targets as >> well) will build the standard kamailio packages and a new >> "kamailio-ims-modules" package >> - You need to adapt the configuration of the OpenIMS-P-CSCF a little, >> to make it work (basically change some paths); i will add a working >> config next week >> - so far, i did only test the P-CSCF-setup with Kamailio, tests of the >> I-/S-CSCF-modules should will follow in the next days (+ i will add >> configurations for those components to the branch) >> - we have a testsetup in place, consisting of the "original" OpenIMS >> P-/I- and S-CSCF, the Kamailio replacements, a presence/XCAP-server >> (to make the setup more interesting, thanks to Daniel for his great >> howto on asipto.com) and the FHoSS. All systems run on dedicated >> (virtual) machines. >> - as soon as there is more progress, i can make our repository for >> debian lenny accessible from the outside world (it currently just has >> a private IP) >> >> => OpenHSS.org (as a FHoSS-Replacement): >> - a year ago, i started to develop a replacement for Java FHoSS: >> openhss.org (which would be a direct port from the FHoSS to C with >> CDP) >> - due to personal changes (new job, 5 days a week a new city), i >> "paused" the development >> - But now, there is good news: I found someone, who will finish the >> development: Brian "edge" Edginton >> (http://www.ng-voice.com/our-team/brian/) >> >> The full roadmap can be found here: >> http://www.ng-voice.com/our-solution/roadmap/ >> (it contains such "ugly" points as add documentation ;-) ) >> >> The goal of the project is to create a stable, fast, open-source, >> feature-rich IMS implementation based on Kamailio and the >> OpenIMS-Core. >> >> For latest updates on our development, please visit our blog: >> http://www.ng-voice.com/ >> >> Kind regards, >> Carsten >> >> 2011/1/7 Daniel-Constantin Mierla<mico...@gmail.com>: >>> >>> Btw, fyi, Carsten Bock is working on Git branch 'cartenbock/ims' for >>> making >>> straightforward usage of openimscore modules with latest kamailio. If you >>> are interested in this kind of platform, maybe you should fetch that >>> branch, >>> help testing and integration work. >>> >>> Cheers, >>> Daniel >>> >>> On 12/3/10 10:56 AM, "Andrés S. García Ruiz" wrote: >>>> >>>> It works now! Thanks a lot! >>>> >>>> Regards, >>>> Andrés. >>>> >>>> El 30/11/10 21:56, Daniel-Constantin Mierla escribió: >>>>> >>>>> Hello, >>>>> >>>>> the comments at the beginning of the configuration files tells you more >>>>> about how some features are enabled/disabled. I assume you read them as >>>>> you >>>>> enabled authenitcation (by default is disabled) -- you have #!define >>>>> WITH_AUTH. >>>>> >>>>> Maybe in your particular case the best solution is to enable IP >>>>> authentication and add the IP address of OpenIMSCore in address table >>>>> with >>>>> group id 1. >>>>> >>>>> Cheers, >>>>> Daniel >>>>> >>>>> On 11/29/10 3:27 PM, "Andrés S. García Ruiz" wrote: >>>>>> >>>>>> Thanks for your comment, >>>>>> >>>>>> This is my configuration, could you please tell me how to disable >>>>>> authentication? >>>>>> >>>>>> #!KAMAILIO >>>>>> # >>>>>> # Kamailio (OpenSER) SIP Server v3.1 - default configuration script >>>>>> # - web: http://www.kamailio.org >>>>>> # - git: http://sip-router.org >>>>>> # >>>>>> # Direct your questions about this file to: >>>>>> <sr-users@lists.sip-router.org> >>>>>> # >>>>>> # Refer to the Core CookBook at >>>>>> http://www.kamailio.org/dokuwiki/doku.php >>>>>> # for an explanation of possible statements, functions and parameters. >>>>>> # >>>>>> # Several features can be enabled using '#!define WITH_FEATURE' >>>>>> directives: >>>>>> # >>>>>> # *** To run in debug mode: >>>>>> # - define WITH_DEBUG >>>>>> # >>>>>> # *** To enable mysql: >>>>>> # - define WITH_MYSQL >>>>>> # >>>>>> # *** To enable authentication execute: >>>>>> # - enable mysql >>>>>> # - define WITH_AUTH >>>>>> # - add users using 'kamctl' >>>>>> # >>>>>> # *** To enable IP authentication execute: >>>>>> # - enable mysql >>>>>> # - enable authentication >>>>>> # - define WITH_IPAUTH >>>>>> # - add IP addresses with group id '1' to 'address' table >>>>>> # >>>>>> # *** To enable persistent user location execute: >>>>>> # - enable mysql >>>>>> # - define WITH_USRLOCDB >>>>>> # >>>>>> # *** To enable presence server execute: >>>>>> # - enable mysql >>>>>> # - define WITH_PRESENCE >>>>>> # >>>>>> # *** To enable nat traversal execute: >>>>>> # - define WITH_NAT >>>>>> # - install RTPProxy: http://www.rtpproxy.org >>>>>> # - start RTPProxy: >>>>>> # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 >>>>>> # >>>>>> # *** To enable PSTN gateway routing execute: >>>>>> # - define WITH_PSTN >>>>>> # - set the value of pstn.gw_ip >>>>>> # - check route[PSTN] for regexp routing condition >>>>>> # >>>>>> # *** To enable database aliases lookup execute: >>>>>> # - enable mysql >>>>>> # - define WITH_ALIASDB >>>>>> # >>>>>> # *** To enable multi-domain support execute: >>>>>> # - enable mysql >>>>>> # - define WITH_MULTIDOMAIN >>>>>> # >>>>>> # *** To enable TLS support execute: >>>>>> # - adjust CFGDIR/tls.cfg as needed >>>>>> # - define WITH_TLS >>>>>> # >>>>>> # *** To enable XMLRPC support execute: >>>>>> # - define WITH_XMLRPC >>>>>> # - adjust route[XMLRPC] for access policy >>>>>> # >>>>>> # *** To enable anti-flood detection execute: >>>>>> # - adjust pike and htable=>ipban settings as needed (default is >>>>>> # block if more than 16 requests in 2 seconds and ban for 300 >>>>>> seconds) >>>>>> # - define WITH_ANTIFLOOD >>>>>> # >>>>>> # *** To enhance accounting execute: >>>>>> # - enable mysql >>>>>> # - define WITH_ACCDB >>>>>> # - add following columns to database >>>>>> #!ifdef ACCDB_COMMENT >>>>>> ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; >>>>>> ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT >>>>>> ''; >>>>>> ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; >>>>>> ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; >>>>>> ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT >>>>>> ''; >>>>>> ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL >>>>>> DEFAULT ''; >>>>>> ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL >>>>>> DEFAULT ''; >>>>>> ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL >>>>>> DEFAULT ''; >>>>>> ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL >>>>>> DEFAULT ''; >>>>>> ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL >>>>>> DEFAULT ''; >>>>>> #!endif >>>>>> >>>>>> ####### Defined Values ######### >>>>>> >>>>>> #!define WITH_DEBUG >>>>>> #!define WITH_AUTH >>>>>> #!define WITH_MYSQL >>>>>> #!define WITH_USRLOCDB >>>>>> >>>>>> # *** Value defines - IDs used later in config >>>>>> #!ifdef WITH_MYSQL >>>>>> # - database URL - used to connect to database server by modules such >>>>>> # as: auth_db, acc, usrloc, a.s.o. >>>>>> #!define DBURL "mysql://openser:openserrw@localhost/openser" >>>>>> #!endif >>>>>> #!ifdef WITH_MULTIDOMAIN >>>>>> # - the value for 'use_domain' parameters >>>>>> #!define MULTIDOMAIN 1 >>>>>> #!else >>>>>> #!define MULTIDOMAIN 0 >>>>>> #!endif >>>>>> >>>>>> # - flags >>>>>> # FLT_ - per transaction (message) flags >>>>>> # FLB_ - per branch flags >>>>>> #!define FLT_ACC 1 >>>>>> #!define FLT_ACCMISSED 2 >>>>>> #!define FLT_ACCFAILED 3 >>>>>> #!define FLT_NATS 5 >>>>>> >>>>>> #!define FLB_NATB 6 >>>>>> #!define FLB_NATSIPPING 7 >>>>>> >>>>>> ####### Global Parameters ######### >>>>>> >>>>>> #!ifdef WITH_DEBUG >>>>>> debug=4 >>>>>> log_stderror=yes >>>>>> #!else >>>>>> debug=2 >>>>>> log_stderror=no >>>>>> #!endif >>>>>> >>>>>> memdbg=5 >>>>>> memlog=5 >>>>>> >>>>>> log_facility=LOG_LOCAL0 >>>>>> >>>>>> fork=yes >>>>>> children=4 >>>>>> >>>>>> /* uncomment the next line to disable TCP (default on) */ >>>>>> #disable_tcp=yes >>>>>> >>>>>> >>>>>> /* uncomment the next line to disable the auto discovery of local >>>>>> aliases >>>>>> based on reverse DNS on IPs (default on) */ >>>>>> #auto_aliases=no >>>>>> >>>>>> /* add local domain aliases */ >>>>>> alias="open-ims.test" >>>>>> >>>>>> /* uncomment and configure the following line if you want Kamailio to >>>>>> bind on a specific interface/port/proto (default bind on all >>>>>> available) */ >>>>>> #listen=udp:10.0.0.10:5060 >>>>>> >>>>>> /* port to listen to >>>>>> * - can be specified more than once if needed to listen on many ports >>>>>> */ >>>>>> port=5060 >>>>>> >>>>>> #!ifdef WITH_TLS >>>>>> enable_tls=yes >>>>>> #!endif >>>>>> >>>>>> ####### Custom Parameters ######### >>>>>> >>>>>> # These parameters can be modified runtime via RPC interface >>>>>> # - see the documentation of 'cfg_rpc' module. >>>>>> # >>>>>> # Format: group.id = value 'desc' description >>>>>> # Access: $sel(cfg_get.group.id) or @cfg_get.group.id >>>>>> # >>>>>> >>>>>> #!ifdef WITH_PSTN >>>>>> # PSTN GW Routing >>>>>> # >>>>>> # - pstn.gw_ip: valid IP or hostname as string value, example: >>>>>> # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" >>>>>> # >>>>>> # - by default is empty to avoid misrouting >>>>>> pstn.gw_ip = "" desc "PSTN GW Address" >>>>>> #!endif >>>>>> >>>>>> >>>>>> ####### Modules Section ######## >>>>>> >>>>>> # set paths to location of modules >>>>>> #!ifdef LOCAL_TEST_RUN >>>>>> mpath="modules_k:modules" >>>>>> #!else >>>>>> >>>>>> >>>>>> mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_MYSQL >>>>>> loadmodule "db_mysql.so" >>>>>> #!endif >>>>>> >>>>>> loadmodule "mi_fifo.so" >>>>>> loadmodule "kex.so" >>>>>> loadmodule "tm.so" >>>>>> loadmodule "tmx.so" >>>>>> loadmodule "sl.so" >>>>>> loadmodule "rr.so" >>>>>> loadmodule "pv.so" >>>>>> loadmodule "maxfwd.so" >>>>>> loadmodule "usrloc.so" >>>>>> loadmodule "registrar.so" >>>>>> loadmodule "textops.so" >>>>>> loadmodule "siputils.so" >>>>>> loadmodule "xlog.so" >>>>>> loadmodule "sanity.so" >>>>>> loadmodule "ctl.so" >>>>>> loadmodule "mi_rpc.so" >>>>>> loadmodule "acc.so" >>>>>> >>>>>> #!ifdef WITH_AUTH >>>>>> loadmodule "auth.so" >>>>>> loadmodule "auth_db.so" >>>>>> #!ifdef WITH_IPAUTH >>>>>> loadmodule "permissions.so" >>>>>> #!endif >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_ALIASDB >>>>>> loadmodule "alias_db.so" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_MULTIDOMAIN >>>>>> loadmodule "domain.so" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_PRESENCE >>>>>> loadmodule "presence.so" >>>>>> loadmodule "presence_xml.so" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_NAT >>>>>> loadmodule "nathelper.so" >>>>>> loadmodule "rtpproxy.so" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_TLS >>>>>> loadmodule "tls.so" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_ANTIFLOOD >>>>>> loadmodule "htable.so" >>>>>> loadmodule "pike.so" >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_XMLRPC >>>>>> loadmodule "xmlrpc.so" >>>>>> #!endif >>>>>> >>>>>> # ----------------- setting module-specific parameters --------------- >>>>>> >>>>>> >>>>>> # ----- mi_fifo params ----- >>>>>> modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") >>>>>> >>>>>> >>>>>> # ----- tm params ----- >>>>>> # auto-discard branches from previous serial forking leg >>>>>> modparam("tm", "failure_reply_mode", 3) >>>>>> # default retransmission timeout: 30sec >>>>>> modparam("tm", "fr_timer", 30000) >>>>>> # default invite retransmission timeout after 1xx: 120sec >>>>>> modparam("tm", "fr_inv_timer", 120000) >>>>>> >>>>>> >>>>>> # ----- rr params ----- >>>>>> # add value to ;lr param to cope with most of the UAs >>>>>> modparam("rr", "enable_full_lr", 1) >>>>>> # do not append from tag to the RR (no need for this script) >>>>>> modparam("rr", "append_fromtag", 0) >>>>>> >>>>>> >>>>>> # ----- registrar params ----- >>>>>> modparam("registrar", "method_filtering", 1) >>>>>> /* uncomment the next line to disable parallel forking via location */ >>>>>> # modparam("registrar", "append_branches", 0) >>>>>> /* uncomment the next line not to allow more than 10 contacts per AOR >>>>>> */ >>>>>> #modparam("registrar", "max_contacts", 10) >>>>>> >>>>>> >>>>>> # ----- acc params ----- >>>>>> /* what special events should be accounted ? */ >>>>>> modparam("acc", "early_media", 0) >>>>>> modparam("acc", "report_ack", 0) >>>>>> modparam("acc", "report_cancels", 0) >>>>>> /* by default ww do not adjust the direct of the sequential requests. >>>>>> if you enable this parameter, be sure the enable "append_fromtag" >>>>>> in "rr" module */ >>>>>> modparam("acc", "detect_direction", 0) >>>>>> /* account triggers (flags) */ >>>>>> modparam("acc", "log_flag", FLT_ACC) >>>>>> modparam("acc", "log_missed_flag", FLT_ACCMISSED) >>>>>> modparam("acc", "log_extra", >>>>>> >>>>>> >>>>>> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") >>>>>> modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) >>>>>> /* enhanced DB accounting */ >>>>>> #!ifdef WITH_ACCDB >>>>>> modparam("acc", "db_flag", FLT_ACC) >>>>>> modparam("acc", "db_missed_flag", FLT_ACCMISSED) >>>>>> modparam("acc", "db_url", DBURL) >>>>>> modparam("acc", "db_extra", >>>>>> >>>>>> >>>>>> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") >>>>>> #!endif >>>>>> >>>>>> >>>>>> # ----- usrloc params ----- >>>>>> /* enable DB persistency for location entries */ >>>>>> #!ifdef WITH_USRLOCDB >>>>>> modparam("usrloc", "db_url", DBURL) >>>>>> modparam("usrloc", "db_mode", 2) >>>>>> modparam("usrloc", "use_domain", MULTIDOMAIN) >>>>>> #!endif >>>>>> >>>>>> >>>>>> # ----- auth_db params ----- >>>>>> #!ifdef WITH_AUTH >>>>>> modparam("auth_db", "db_url", DBURL) >>>>>> modparam("auth_db", "calculate_ha1", yes) >>>>>> modparam("auth_db", "password_column", "password") >>>>>> modparam("auth_db", "load_credentials", "") >>>>>> modparam("auth_db", "use_domain", MULTIDOMAIN) >>>>>> >>>>>> # ----- permissions params ----- >>>>>> #!ifdef WITH_IPAUTH >>>>>> modparam("permissions", "db_url", DBURL) >>>>>> modparam("permissions", "db_mode", 1) >>>>>> #!endif >>>>>> >>>>>> #!endif >>>>>> >>>>>> >>>>>> # ----- alias_db params ----- >>>>>> #!ifdef WITH_ALIASDB >>>>>> modparam("alias_db", "db_url", DBURL) >>>>>> modparam("alias_db", "use_domain", MULTIDOMAIN) >>>>>> #!endif >>>>>> >>>>>> >>>>>> # ----- domain params ----- >>>>>> #!ifdef WITH_MULTIDOMAIN >>>>>> modparam("domain", "db_url", DBURL) >>>>>> # use caching >>>>>> modparam("domain", "db_mode", 1) >>>>>> # register callback to match myself condition with domains list >>>>>> modparam("domain", "register_myself", 1) >>>>>> #!endif >>>>>> >>>>>> >>>>>> #!ifdef WITH_PRESENCE >>>>>> # ----- presence params ----- >>>>>> modparam("presence", "db_url", DBURL) >>>>>> >>>>>> # ----- presence_xml params ----- >>>>>> modparam("presence_xml", "db_url", DBURL) >>>>>> modparam("presence_xml", "force_active", 1) >>>>>> #!endif >>>>>> >>>>>> >>>>>> #!ifdef WITH_NAT >>>>>> # ----- rtpproxy params ----- >>>>>> modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") >>>>>> >>>>>> # ----- nathelper params ----- >>>>>> modparam("nathelper", "natping_interval", 30) >>>>>> modparam("nathelper", "ping_nated_only", 1) >>>>>> modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) >>>>>> modparam("nathelper", "sipping_from", "sip:pin...@kamailio.org") >>>>>> >>>>>> # params needed for NAT traversal in other modules >>>>>> modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") >>>>>> modparam("usrloc", "nat_bflag", FLB_NATB) >>>>>> #!endif >>>>>> >>>>>> >>>>>> #!ifdef WITH_TLS >>>>>> # ----- tls params ----- >>>>>> modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_ANTIFLOOD >>>>>> # ----- pike params ----- >>>>>> modparam("pike", "sampling_time_unit", 2) >>>>>> modparam("pike", "reqs_density_per_unit", 16) >>>>>> modparam("pike", "remove_latency", 4) >>>>>> >>>>>> # ----- htable params ----- >>>>>> # ip ban htable with autoexpire after 5 minutes >>>>>> modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") >>>>>> #!endif >>>>>> >>>>>> #!ifdef WITH_XMLRPC >>>>>> # ----- xmlrpc params ----- >>>>>> modparam("xmlrpc", "route", "XMLRPC"); >>>>>> modparam("xmlrpc", "url_match", "^/RPC") >>>>>> #!endif >>>>>> >>>>>> ####### Routing Logic ######## >>>>>> >>>>>> >>>>>> # Main SIP request routing logic >>>>>> # - processing of any incoming SIP request starts with this route >>>>>> route { >>>>>> >>>>>> # per request initial checks >>>>>> route(REQINIT); >>>>>> >>>>>> # NAT detection >>>>>> route(NAT); >>>>>> >>>>>> # handle requests within SIP dialogs >>>>>> route(WITHINDLG); >>>>>> >>>>>> ### only initial requests (no To tag) >>>>>> >>>>>> # CANCEL processing >>>>>> if (is_method("CANCEL")) >>>>>> { >>>>>> if (t_check_trans()) >>>>>> t_relay(); >>>>>> exit; >>>>>> } >>>>>> >>>>>> t_check_trans(); >>>>>> >>>>>> # authentication >>>>>> route(AUTH); >>>>>> >>>>>> # record routing for dialog forming requests (in case they are >>>>>> routed) >>>>>> # - remove preloaded route headers >>>>>> remove_hf("Route"); >>>>>> if (is_method("INVITE|SUBSCRIBE")) >>>>>> record_route(); >>>>>> >>>>>> # account only INVITEs >>>>>> if (is_method("INVITE")) >>>>>> { >>>>>> setflag(FLT_ACC); # do accounting >>>>>> } >>>>>> >>>>>> # dispatch requests to foreign domains >>>>>> route(SIPOUT); >>>>>> >>>>>> ### requests for my local domains >>>>>> >>>>>> # handle presence related requests >>>>>> route(PRESENCE); >>>>>> >>>>>> # handle registrations >>>>>> route(REGISTRAR); >>>>>> >>>>>> if ($rU==$null) >>>>>> { >>>>>> # request with no Username in RURI >>>>>> sl_send_reply("484","Address Incomplete"); >>>>>> exit; >>>>>> } >>>>>> >>>>>> # dispatch destinations to PSTN >>>>>> route(PSTN); >>>>>> >>>>>> # user location service >>>>>> route(LOCATION); >>>>>> >>>>>> route(RELAY); >>>>>> } >>>>>> >>>>>> >>>>>> route[RELAY] { >>>>>> #!ifdef WITH_NAT >>>>>> if (check_route_param("nat=yes")) { >>>>>> setbflag(FLB_NATB); >>>>>> } >>>>>> if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { >>>>>> route(RTPPROXY); >>>>>> } >>>>>> #!endif >>>>>> >>>>>> /* example how to enable some additional event routes */ >>>>>> if (is_method("INVITE")) { >>>>>> #t_on_branch("BRANCH_ONE"); >>>>>> t_on_reply("REPLY_ONE"); >>>>>> t_on_failure("FAIL_ONE"); >>>>>> } >>>>>> >>>>>> if (!t_relay()) { >>>>>> sl_reply_error(); >>>>>> } >>>>>> exit; >>>>>> } >>>>>> >>>>>> # Per SIP request initial checks >>>>>> route[REQINIT] { >>>>>> #!ifdef WITH_ANTIFLOOD >>>>>> # flood dection from same IP and traffic ban for a while >>>>>> # be sure you exclude checking trusted peers, such as pstn gateways >>>>>> # - local host excluded (e.g., loop to self) >>>>>> if(src_ip!=myself) >>>>>> { >>>>>> if($sht(ipban=>$si)!=$null) >>>>>> { >>>>>> # ip is already blocked >>>>>> xdbg("request from blocked IP - $rm from $fu >>>>>> (IP:$si:$sp)\n"); >>>>>> exit; >>>>>> } >>>>>> if (!pike_check_req()) >>>>>> { >>>>>> xlog("L_ALERT","ALERT: pike blocking $rm from $fu >>>>>> (IP:$si:$sp)\n"); >>>>>> $sht(ipban=>$si) = 1; >>>>>> exit; >>>>>> } >>>>>> } >>>>>> #!endif >>>>>> >>>>>> if (!mf_process_maxfwd_header("10")) { >>>>>> sl_send_reply("483","Too Many Hops"); >>>>>> exit; >>>>>> } >>>>>> >>>>>> if(!sanity_check("1511", "7")) >>>>>> { >>>>>> xlog("Malformed SIP message from $si:$sp\n"); >>>>>> exit; >>>>>> } >>>>>> } >>>>>> >>>>>> # Handle requests within SIP dialogs >>>>>> route[WITHINDLG] { >>>>>> if (has_totag()) { >>>>>> # sequential request withing a dialog should >>>>>> # take the path determined by record-routing >>>>>> if (loose_route()) { >>>>>> if (is_method("BYE")) { >>>>>> setflag(FLT_ACC); # do accounting ... >>>>>> setflag(FLT_ACCFAILED); # ... even if the transaction >>>>>> fails >>>>>> } >>>>>> route(RELAY); >>>>>> } else { >>>>>> if (is_method("SUBSCRIBE")&& uri == myself) { >>>>>> # in-dialog subscribe requests >>>>>> route(PRESENCE); >>>>>> exit; >>>>>> } >>>>>> if ( is_method("ACK") ) { >>>>>> if ( t_check_trans() ) { >>>>>> # no loose-route, but stateful ACK; >>>>>> # must be an ACK after a 487 >>>>>> # or e.g. 404 from upstream server >>>>>> t_relay(); >>>>>> exit; >>>>>> } else { >>>>>> # ACK without matching transaction ... ignore and >>>>>> discard >>>>>> exit; >>>>>> } >>>>>> } >>>>>> sl_send_reply("404","Not here"); >>>>>> } >>>>>> exit; >>>>>> } >>>>>> } >>>>>> >>>>>> # Handle SIP registrations >>>>>> route[REGISTRAR] { >>>>>> if (is_method("REGISTER")) >>>>>> { >>>>>> if(isflagset(FLT_NATS)) >>>>>> { >>>>>> setbflag(FLB_NATB); >>>>>> # uncomment next line to do SIP NAT pinging >>>>>> ## setbflag(FLB_NATSIPPING); >>>>>> } >>>>>> if (!save("location")) >>>>>> sl_reply_error(); >>>>>> >>>>>> exit; >>>>>> } >>>>>> } >>>>>> >>>>>> # USER location service >>>>>> route[LOCATION] { >>>>>> >>>>>> #!ifdef WITH_ALIASDB >>>>>> # search in DB-based aliases >>>>>> alias_db_lookup("dbaliases"); >>>>>> #!endif >>>>>> >>>>>> if (!lookup("location")) { >>>>>> switch ($rc) { >>>>>> case -1: >>>>>> case -3: >>>>>> t_newtran(); >>>>>> t_reply("404", "Not Found"); >>>>>> exit; >>>>>> case -2: >>>>>> sl_send_reply("405", "Method Not Allowed"); >>>>>> exit; >>>>>> } >>>>>> } >>>>>> >>>>>> # when routing via usrloc, log the missed calls also >>>>>> if (is_method("INVITE")) >>>>>> { >>>>>> setflag(FLT_ACCMISSED); >>>>>> } >>>>>> } >>>>>> >>>>>> # Presence server route >>>>>> route[PRESENCE] { >>>>>> if(!is_method("PUBLISH|SUBSCRIBE")) >>>>>> return; >>>>>> >>>>>> #!ifdef WITH_PRESENCE >>>>>> if (!t_newtran()) >>>>>> { >>>>>> sl_reply_error(); >>>>>> exit; >>>>>> }; >>>>>> >>>>>> if(is_method("PUBLISH")) >>>>>> { >>>>>> if($hdr(Sender)!= NULL) >>>>>> handle_publish("$hdr(Sender)"); >>>>>> else >>>>>> handle_publish(""); >>>>>> t_release(); >>>>>> } >>>>>> else >>>>>> if( is_method("SUBSCRIBE")) >>>>>> { >>>>>> handle_subscribe(); >>>>>> t_release(); >>>>>> } >>>>>> exit; >>>>>> #!endif >>>>>> >>>>>> # if presence enabled, this part will not be executed >>>>>> if (is_method("PUBLISH") || $rU==$null) >>>>>> { >>>>>> sl_send_reply("404", "Not here"); >>>>>> exit; >>>>>> } >>>>>> return; >>>>>> } >>>>>> >>>>>> # Authentication route >>>>>> route[AUTH] { >>>>>> #!ifdef WITH_AUTH >>>>>> if (is_method("REGISTER")) >>>>>> { >>>>>> # authenticate the REGISTER requests (uncomment to enable auth) >>>>>> if (!www_authorize("$td", "subscriber")) >>>>>> { >>>>>> www_challenge("$td", "0"); >>>>>> exit; >>>>>> } >>>>>> >>>>>> if ($au!=$tU) >>>>>> { >>>>>> sl_send_reply("403","Forbidden auth ID"); >>>>>> exit; >>>>>> } >>>>>> } else { >>>>>> >>>>>> #!ifdef WITH_IPAUTH >>>>>> if(allow_source_address()) >>>>>> { >>>>>> # source IP allowed >>>>>> return; >>>>>> } >>>>>> #!endif >>>>>> # authenticate if from local subscriber >>>>>> if (from_uri==myself) >>>>>> { >>>>>> if (!proxy_authorize("$fd", "subscriber")) { >>>>>> proxy_challenge("$fd", "0"); >>>>>> exit; >>>>>> } >>>>>> if (is_method("PUBLISH")) >>>>>> { >>>>>> if ($au!=$tU) { >>>>>> sl_send_reply("403","Forbidden auth ID"); >>>>>> exit; >>>>>> } >>>>>> } else { >>>>>> if ($au!=$fU) { >>>>>> sl_send_reply("403","Forbidden auth ID"); >>>>>> exit; >>>>>> } >>>>>> } >>>>>> >>>>>> consume_credentials(); >>>>>> # caller authenticated >>>>>> } else { >>>>>> # caller is not local subscriber, then check if it calls >>>>>> # a local destination, otherwise deny, not an open relay >>>>>> here >>>>>> if (!uri==myself) >>>>>> { >>>>>> sl_send_reply("403","Not relaying"); >>>>>> exit; >>>>>> } >>>>>> } >>>>>> } >>>>>> #!endif >>>>>> return; >>>>>> } >>>>>> >>>>>> # Caller NAT detection route >>>>>> route[NAT] { >>>>>> #!ifdef WITH_NAT >>>>>> force_rport(); >>>>>> if (nat_uac_test("19")) { >>>>>> if (method=="REGISTER") { >>>>>> fix_nated_register(); >>>>>> } else { >>>>>> fix_nated_contact(); >>>>>> } >>>>>> setflag(FLT_NATS); >>>>>> } >>>>>> #!endif >>>>>> return; >>>>>> } >>>>>> >>>>>> # RTPProxy control >>>>>> route[RTPPROXY] { >>>>>> #!ifdef WITH_NAT >>>>>> if (is_method("BYE")) { >>>>>> unforce_rtp_proxy(); >>>>>> } else if (is_method("INVITE")){ >>>>>> force_rtp_proxy(); >>>>>> } >>>>>> if (!has_totag()) add_rr_param(";nat=yes"); >>>>>> #!endif >>>>>> return; >>>>>> } >>>>>> >>>>>> # Routing to foreign domains >>>>>> route[SIPOUT] { >>>>>> if (!uri==myself) >>>>>> { >>>>>> append_hf("P-hint: outbound\r\n"); >>>>>> route(RELAY); >>>>>> } >>>>>> } >>>>>> >>>>>> # PSTN GW routing >>>>>> route[PSTN] { >>>>>> #!ifdef WITH_PSTN >>>>>> # check if PSTN GW IP is defined >>>>>> if (strempty($sel(cfg_get.pstn.gw_ip))) { >>>>>> xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not >>>>>> defined\n"); >>>>>> return; >>>>>> } >>>>>> >>>>>> # route to PSTN dialed numbers starting with '+' or '00' >>>>>> # (international format) >>>>>> # - update the condition to match your dialing rules for PSTN >>>>>> routing >>>>>> if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) >>>>>> return; >>>>>> >>>>>> # only local users allowed to call >>>>>> if(from_uri!=myself) { >>>>>> sl_send_reply("403", "Not Allowed"); >>>>>> exit; >>>>>> } >>>>>> >>>>>> $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); >>>>>> >>>>>> route(RELAY); >>>>>> exit; >>>>>> #!endif >>>>>> >>>>>> return; >>>>>> } >>>>>> >>>>>> # XMLRPC routing >>>>>> #!ifdef WITH_XMLRPC >>>>>> route[XMLRPC] >>>>>> { >>>>>> # allow XMLRPC from localhost >>>>>> if ((method=="POST" || method=="GET") >>>>>> && (src_ip==127.0.0.1)) { >>>>>> # close connection only for xmlrpclib user agents (there is a >>>>>> bug >>>>>> in >>>>>> # xmlrpclib: it waits for EOF before interpreting the >>>>>> response). >>>>>> if ($hdr(User-Agent) =~ "xmlrpclib") >>>>>> set_reply_close(); >>>>>> set_reply_no_connect(); >>>>>> dispatch_rpc(); >>>>>> exit; >>>>>> } >>>>>> send_reply("403", "Forbidden"); >>>>>> exit; >>>>>> } >>>>>> #!endif >>>>>> >>>>>> # Sample branch router >>>>>> branch_route[BRANCH_ONE] { >>>>>> xdbg("new branch at $ru\n"); >>>>>> } >>>>>> >>>>>> # Sample onreply route >>>>>> onreply_route[REPLY_ONE] { >>>>>> xdbg("incoming reply\n"); >>>>>> #!ifdef WITH_NAT >>>>>> if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) >>>>>> && status=~"(183)|(2[0-9][0-9])") { >>>>>> force_rtp_proxy(); >>>>>> } >>>>>> if (isbflagset("6")) { >>>>>> fix_nated_contact(); >>>>>> } >>>>>> #!endif >>>>>> } >>>>>> >>>>>> # Sample failure route >>>>>> failure_route[FAIL_ONE] { >>>>>> #!ifdef WITH_NAT >>>>>> if (is_method("INVITE") >>>>>> && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { >>>>>> unforce_rtp_proxy(); >>>>>> } >>>>>> #!endif >>>>>> >>>>>> if (t_is_canceled()) { >>>>>> exit; >>>>>> } >>>>>> >>>>>> # uncomment the following lines if you want to block client >>>>>> # redirect based on 3xx replies. >>>>>> ##if (t_check_status("3[0-9][0-9]")) { >>>>>> ##t_reply("404","Not found"); >>>>>> ## exit; >>>>>> ##} >>>>>> >>>>>> # uncomment the following lines if you want to redirect the failed >>>>>> # calls to a different new destination >>>>>> ##if (t_check_status("486|408")) { >>>>>> ## sethostport("192.168.2.100:5060"); >>>>>> ## append_branch(); >>>>>> ## # do not set the missed call flag again >>>>>> ## t_relay(); >>>>>> ##} >>>>>> } >>>>>> >>>>>> >>>>>> Thanks a lot, >>>>>> Andrés. >>>>>> >>>>>> El 29/11/2010 15:15, Klaus Darilion escribió: >>>>>>> >>>>>>> If you do not want to authenticate the requests then disable >>>>>>> authentication kamailio.cfg >>>>>>> >>>>>>> regards >>>>>>> Klaus >>>>>>> >>>>>>> Am 29.11.2010 12:53, schrieb "Andrés S. García Ruiz": >>>>>>>> >>>>>>>> Hi everybody, >>>>>>>> >>>>>>>> I'm trying to deploy an IMS network with OpenIMSCore and Kamailio. >>>>>>>> Since >>>>>>>> OpenIMSCore has been already tested along with Mobicents, now I want >>>>>>>> substitute Mobicents for Kamailio. I've also successfully installed >>>>>>>> Kamailio. I can run it without any problem, but when SIP Publish >>>>>>>> messages arrive at Kamalio, it answers with "407 Proxy >>>>>>>> Authentication >>>>>>>> Required". The IMS presentity is already registered against the >>>>>>>> OpenIMSCore. How can I solve that problem? >>>>>>>> >>>>>>>> The publish message sent: >>>>>>>> >>>>>>>> PUBLISH sip:testuse...@open-ims.test SIP/2.0 >>>>>>>> Route:<sip:ciervo.inf.um.es:5060;lr>, >>>>>>>> >>>>>>>> >>>>>>>> <sip:iscm...@scscf.open-ims.test:6060;lr;s=1;h=0;d=0;a=7369703a74657374757365723031406f70656e2d696d732e74657374> >>>>>>>> >>>>>>>> Call-ID: K28QO9PYAE5vn3RNdYOkIEddMEd6yDiqeAW7DwSt6XV. >>>>>>>> CSeq: 1 PUBLISH >>>>>>>> From: "testuser01"<sip:testuse...@open-ims.test>;tag=ff123bda >>>>>>>> To: "testuser01"<sip:testuse...@open-ims.test> >>>>>>>> Via: SIP/2.0/UDP 155.54.210.135:6060;branch=z9hG4bKa31a.6cba1cd2.0 >>>>>>>> Via: SIP/2.0/UDP >>>>>>>> 155.54.210.134:4060;branch=z9hG4bKa31a.71481d13.0;i=1 >>>>>>>> Via: SIP/2.0/TCP >>>>>>>> >>>>>>>> >>>>>>>> 155.54.190.166:8060;rport=41624;branch=z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z- >>>>>>>> >>>>>>>> Max-Forwards: 15 >>>>>>>> Content-Type: application/pidf+xml >>>>>>>> Expires: 30000 >>>>>>>> Event: presence >>>>>>>> Contact:<sip:testuser01@155.54.190.166:8060> >>>>>>>> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, >>>>>>>> SUBSCRIBE, INFO >>>>>>>> User-Agent: X-Lite IMS-OSGi-Client 0.1 >>>>>>>> CVS-Mon_Nov_29_10-14-33_CET_2010 >>>>>>>> Content-Length: 451 >>>>>>>> P-Asserted-Identity:<sip:testuse...@open-ims.test> >>>>>>>> P-Charging-Vector: >>>>>>>> >>>>>>>> >>>>>>>> icid-value="P-CSCFabcd000000004cf3708400000002";icid-generated-at=155.54.210.134;orig-ioi="open-ims.test" >>>>>>>> >>>>>>>> >>>>>>>> <?xml version='1.0' encoding='UTF-8'?><presence >>>>>>>> xmlns='urn:ietf:params:xml:ns:pidf' >>>>>>>> xmlns:c='urn:ietf:params:xml:ns:pidf:cipid' >>>>>>>> xmlns:dm='urn:ietf:params:xml:ns:pidf:data-model' >>>>>>>> xmlns:rpid='urn:ietf:params:xml:ns:pidf:rpid' >>>>>>>> entity='sip:testuse...@open-ims.test'><tuple >>>>>>>> >>>>>>>> id='t6b9a6ab3'><status><basic>open</basic></status></tuple><dm:person >>>>>>>> >>>>>>>> >>>>>>>> id='p34b126e5'><rpid:activities><rpid:Online/></rpid:activities><dm:note>Online</dm:note></dm:person></presence> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Kamailio answer: >>>>>>>> SIP/2.0 407 Proxy Authentication Required >>>>>>>> Call-ID: K28QO9PYAE5vn3RNdYOkIEddMEd6yDiqeAW7DwSt6XV. >>>>>>>> CSeq: 1 PUBLISH >>>>>>>> From: "testuser01"<sip:testuse...@open-ims.test>;tag=ff123bda >>>>>>>> To: "testuser01" >>>>>>>> >>>>>>>> >>>>>>>> <sip:testuse...@open-ims.test>;tag=b27e1a1d33761e85846fc98f5f3a7e58.3d3a >>>>>>>> Via: SIP/2.0/UDP 155.54.210.135:6060;branch=z9hG4bKa31a.6cba1cd2.0 >>>>>>>> Via: SIP/2.0/UDP >>>>>>>> 155.54.210.134:4060;branch=z9hG4bKa31a.71481d13.0;i=1 >>>>>>>> Via: SIP/2.0/TCP >>>>>>>> >>>>>>>> >>>>>>>> 155.54.190.166:8060;rport=41624;branch=z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z- >>>>>>>> >>>>>>>> Proxy-Authenticate: Digest realm="open-ims.test", >>>>>>>> nonce="TPNwMkzzbwZRE1piAM8yHaXGsXvwS16v" >>>>>>>> Server: kamailio (3.1.0 (i386/linux)) >>>>>>>> Content-Length: 0 >>>>>>>> >>>>>>>> >>>>>>>> Kamailio log: >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:628]: SIP Request: >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:630]: method:<PUBLISH> >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:632]: uri: >>>>>>>> <sip:testuse...@open-ims.test> >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:634]: version:<SIP/2.0> >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:165]: get_hdr_field: >>>>>>>> cseq >>>>>>>> <CSeq>:<1> <PUBLISH> >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_to.c:803]: end of header >>>>>>>> reached, >>>>>>>> state=10 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:185]: DEBUG: >>>>>>>> get_hdr_field: >>>>>>>> <To> [45]; uri=[sip:testuse...@open-ims.test] >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:187]: DEBUG: to body >>>>>>>> ["testuser01"<sip:testuse...@open-ims.test> >>>>>>>> ] >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>> 232, >>>>>>>> <branch> =<z9hG4bKa31a.6cba1cd2.0>; state=16 >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:2300]: end of header >>>>>>>> reached, >>>>>>>> state=5 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:513]: parse_headers: Via >>>>>>>> found, flags=2 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:515]: parse_headers: >>>>>>>> this >>>>>>>> is >>>>>>>> the first via >>>>>>>> 5(15391) DEBUG:<core> [receive.c:145]: After parse_msg... >>>>>>>> 5(15391) DEBUG:<core> [receive.c:186]: preparing to run routing >>>>>>>> scripts... >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>> 232, >>>>>>>> <branch> =<z9hG4bKa31a.71481d13.0>; state=6 >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>> 236, >>>>>>>> <i> =<1>; state=16 >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:2300]: end of header >>>>>>>> reached, >>>>>>>> state=5 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:513]: parse_headers: Via >>>>>>>> found, flags=100 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:526]: parse_headers: >>>>>>>> this >>>>>>>> is >>>>>>>> the second via >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>> 235, >>>>>>>> <rport> =<41624>; state=6 >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:1287]: Found param type >>>>>>>> 232, >>>>>>>> <branch> =<z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z->; state=16 >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_via.c:2300]: end of header >>>>>>>> reached, >>>>>>>> state=5 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:513]: parse_headers: Via >>>>>>>> found, flags=100 >>>>>>>> 5(15391) DEBUG: maxfwd [mf_funcs.c:85]: value = 15 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:199]: DEBUG: >>>>>>>> get_hdr_body >>>>>>>> : >>>>>>>> content_length=451 >>>>>>>> 5(15391) DEBUG:<core> [parser/msg_parser.c:101]: found end of >>>>>>>> header >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_to.c:174]: DEBUG: add_param: >>>>>>>> tag=ff123bda >>>>>>>> 5(15391) DEBUG:<core> [parser/parse_to.c:803]: end of header >>>>>>>> reached, >>>>>>>> state=29 >>>>>>>> 5(15391) DEBUG: sanity [mod_sanity.c:217]: all sanity checks passed >>>>>>>> 5(15391) DEBUG: siputils [checks.c:73]: no totag >>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:1081]: DEBUG: t_check_msg: msg id=1 >>>>>>>> global id=0 T start=0xffffffff >>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:528]: t_lookup_request: start >>>>>>>> searching: >>>>>>>> hash=41274, isACK=0 >>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:485]: DEBUG: RFC3261 transaction >>>>>>>> matching >>>>>>>> failed >>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:711]: DEBUG: t_lookup_request: no >>>>>>>> transaction found >>>>>>>> 5(15391) DEBUG: tm [t_lookup.c:1150]: DEBUG: t_check_msg: msg id=1 >>>>>>>> global id=1 T end=(nil) >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> host==us: 13==9&& [open-ims.test] == [127.0.0.1] >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> port 5060 matches port 5060 >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> host==us: 13==14&& [open-ims.test] == [155.54.190.245] >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> port 5060 matches port 5060 >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> host==us: 13==9&& [open-ims.test] == [127.0.0.1] >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> port 5060 matches port 5060 >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:501]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> host==us: 13==14&& [open-ims.test] == [155.54.190.245] >>>>>>>> 5(15391) DEBUG:<core> [socket_info.c:504]: grep_sock_info - >>>>>>>> checking >>>>>>>> if >>>>>>>> port 5060 matches port 5060 >>>>>>>> 5(15391) DEBUG: auth_db [authorize.c:239]: realm value >>>>>>>> [open-ims.test] >>>>>>>> 5(15391) DEBUG: auth [api.c:85]: auth:pre_auth: Credentials with >>>>>>>> realm >>>>>>>> 'open-ims.test' not found >>>>>>>> 5(15391) DEBUG: auth_db [authorize.c:257]: not authenticated >>>>>>>> 5(15391) DEBUG: auth [challenge.c:102]: build_challenge_hf: >>>>>>>> realm='open-ims.test' >>>>>>>> 5(15391) DEBUG: auth [challenge.c:236]: auth: 'Proxy-Authenticate: >>>>>>>> Digest realm="open-ims.test", >>>>>>>> nonce="TPNwMkzzbwZRE1piAM8yHaXGsXvwS16v" >>>>>>>> ' >>>>>>>> 5(15391) DEBUG: sl [sl.c:278]: reply in stateless mode (sl) >>>>>>>> 5(15391) DEBUG:<core> [msg_translator.c:207]: >>>>>>>> check_via_address(155.54.210.135, 155.54.210.135, 0) >>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>> destroying list (nil) >>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>> destroying list (nil) >>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>> destroying list (nil) >>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>> destroying list (nil) >>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>> destroying list (nil) >>>>>>>> 5(15391) DEBUG:<core> [usr_avp.c:646]: DEBUG:destroy_avp_list: >>>>>>>> destroying list (nil) >>>>>>>> 5(15391) DEBUG:<core> [receive.c:289]: receive_msg: cleaning up >>>>>>>> >>>>>>>> >>>>>>>> Thanks in advance, >>>>>>>> Andrés. >>>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>>>> list >>>>>> sr-users@lists.sip-router.org >>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> -- >>> Daniel-Constantin Mierla >>> Kamailio (OpenSER) Advanced Training >>> Jan 24-26, 2011, Irvine, CA, USA >>> http://www.asipto.com >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >> >> > > -- Carsten Bock Schomburgstr. 80 22767 Hamburg Germany Mobile +49 179 2021244 Home +49 40 34927217 Büro (Verl) +49 5246 801427 Fax +49 40 34927218 mailto:cars...@bock.info _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
