On Thu, May 27, 2010 at 9:57 AM, marius zbihlei <marius.zbih...@1and1.ro> wrote: > JR Richardson wrote: >> >> On Thu, May 27, 2010 at 2:39 AM, marius zbihlei <marius.zbih...@1and1.ro> >> wrote: >> >>>> >>>> I think the database entries are setup ok, I used the example in the >>>> module doc, but I can share that if needed. Any guidance will be >>>> appriciated. >>>> >>>> Thanks. >>>> >>>> JR >>>> >>>> >>> >>> Hello JR >>> >>> Can you provide more info regarding the problem. Any special logging info >>> in >>> the debug log? >>> >>> You can increase the debug level to 3 (higher means more verbose) by >>> using >>> the command `kamctl fifo debug 3` >>> >> >> Debug loggin is set to 9. The simulation is when a gateway is totally >> off-line, so there is no response at all. Here is a trace with a call >> from sipp to kamailio, the call is sent to the first gateway in >> carrier 1, domain 1. The gateway is off-line, no response. >> >> The pastebin has my kamailio.cfg, the kamailio debug trace and the >> error received by sipp and the ngrep capture. >> >> http://pastebin.com/VQziKYjE >> > > Hello > > As I see from the info you gave, carrierroute is not configured correctly > regarding your setup > > May 27 09:07:00 [25598] INFO:carrierroute:rewrite_uri_recursor: URI or > prefix tree nodes empty, empty rule list > May 27 09:07:00 [25598] INFO:carrierroute:cr_do_route: rewrite_uri_recursor > doesn't complete, uri 65, carrier 1, domain 2 > > This logic is enabled by the code: > > failure_route[2] { > if (t_check_status("408|5[0-9][0-9]")) { > if(!cr_route("1", "2", "$rU", "$rU", "call_id")){ > t_reply("403", "Not allowed"); > } else { > t_relay(); > } > } > } > > So your relaying to C and D asterisk boxes fails because it can't find a a > prefix match for uri 65. Hence the 403 in the sipp scenario. > Please check the routing table configured for the carrierroute module to > contain a valid entry for carrier 1 domain 2 that might match the prefix 65. > > Cheers > Marius > Thanks Marius, We are douple posting, I appologize, Henning is also directing me in the same method, he noticed that as well. I did have a database issue, but now I'm stuck on the branch route issue. Please reveiw current post "continue processing route script if no response from gateway" response.
Thanks. JR -- JR Richardson Engineering for the Masses _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
