On Thu, May 27, 2010 at 2:39 AM, marius zbihlei <marius.zbih...@1and1.ro> wrote: > >> >> I think the database entries are setup ok, I used the example in the >> module doc, but I can share that if needed. Any guidance will be >> appriciated. >> >> Thanks. >> >> JR >> > > Hello JR > > Can you provide more info regarding the problem. Any special logging info in > the debug log? > > You can increase the debug level to 3 (higher means more verbose) by using > the command `kamctl fifo debug 3`
Debug loggin is set to 9. The simulation is when a gateway is totally off-line, so there is no response at all. Here is a trace with a call from sipp to kamailio, the call is sent to the first gateway in carrier 1, domain 1. The gateway is off-line, no response. The pastebin has my kamailio.cfg, the kamailio debug trace and the error received by sipp and the ngrep capture. http://pastebin.com/VQziKYjE > > Also what reply do you get from A and B boxes? Failure_route is only > executed if reply code is > 300 on all branches... I will check your other > mail because this might be the problem. > > Also a trace of the call will help. ngrep is very usefull (ngrep -W byline > -d any sip port 5060 does the trick in most cases) > > Hope I was not that redundant and the info helps. > > Cheers > Marius > Thanks for having a look. JR -- JR Richardson Engineering for the Masses _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
