Hi Richard, thanks, sounds fine then.
We probably should add some logic to detect the tls_thread mode 1 setting for existing configuration, and then log a WARNING and use the mode 2 or so. Cheers, Henning From: Richard Chan <shihping.c...@gmail.com> Sent: Freitag, 20. Dezember 2024 13:14 To: Henning Westerholt <h...@gilawa.com> Cc: Kamailio (SER) - Development Mailing List <sr-dev@lists.kamailio.org> Subject: Re: [sr-dev] Heads-up: master/libssl - going to revert tls_threads_mode=1 Henning - noted about this; I'm looking at how intrusive the diff is but a quick assessment shows that it shouldn't touch any modules outside tls.so. On Fri, 20 Dec 2024 at 16:42, Henning Westerholt <h...@gilawa.com<mailto:h...@gilawa.com>> wrote: Hello Richard, as we are in the code freeze for 6.0 already, it would be great if you could quickly outline how intrusive the proposed tls_thread mode 3 would be, e.g. would it touch all the modules etc.. We might consider maybe then adding it later. Thank you, Henning From: Richard Chan via sr-dev <sr-dev@lists.kamailio.org<mailto:sr-dev@lists.kamailio.org>> Sent: Freitag, 20. Dezember 2024 03:25 To: Kamailio (SER) - Development Mailing List <sr-dev@lists.kamailio.org<mailto:sr-dev@lists.kamailio.org>> Cc: Richard Chan <shihping.c...@gmail.com<mailto:shihping.c...@gmail.com>> Subject: [sr-dev] Heads-up: master/libssl - going to revert tls_threads_mode=1 HI devs, In trying to solve the libssl3 issue the original attempt with tls_threads_mode=1 turns out to be not quite correct. Since the release of 5.8 we have consistently recommended tls_threads_mode=2 for users of libssl 1.1.1 and 3. For master/6.0.0-pre I will start to revert the changes of tls_threads_mode=1. I will also add a new simpler mode tls_threads_mode=3 based on the diff by Ondrej Jirman <m...@xff.cz<mailto:m...@xff.cz>> (@meengu). Regards Richard
_______________________________________________ Kamailio - Development Mailing List -- sr-dev@lists.kamailio.org To unsubscribe send an email to sr-dev-le...@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
