Hey,
Pinger is not a must but a luxury piece of software. It will make your and others life easier but you can avoid it playing with the configuration option: http://www.squid-cache.org/Doc/config/pinger_enable/ And if you have disabled ipv6 in some way it would be probably wise to start thinking about just enabling it if not using it. Since you have compiled squid by yourself(right?) then you need to disable ipv6 in the squid flags. I do not think it's a very good idea these days but you are the user\admin\client. All The Bests, Eliezer ---- <http://ngtech.co.il/lmgtfy/> Eliezer Croitoru Linux System Administrator Mobile: +972-5-28704261 Email: elie...@ngtech.co.il From: squid-users [mailto:squid-users-boun...@lists.squid-cache.org] On Behalf Of Alejandro Cabrera Obed Sent: Thursday, June 23, 2016 3:45 AM To: squid-users@lists.squid-cache.org Subject: Re: [squid-users] Squid3: icmp_sock: (97) Address family not supported by protocol / pinger: Unable to start ICMPv6 pinger I notice that I've comnpiled squid3 with --enable-icmp but I don't need thsi option because I don't work eith parent caches. So I will try to reconfigure squid3 withouth the ICMP option (no pinger at all), and I expect not to see any IPv6 warning. Regards, 2016-06-22 21:29 GMT-03:00 Alejandro Cabrera Obed <aco1...@gmail.com <mailto:aco1...@gmail.com> >: I can't see anything about IPv6: cat /etc/default/networking: # Configuration for networking init script being run during # the boot sequence # Set to 'no' to skip interfaces configuration on boot #CONFIGURE_INTERFACES=yes # Don't configure these interfaces. Shell wildcards supported/ #EXCLUDE_INTERFACES= # Set to 'yes' to enable additional verbosity #VERBOSE=no cat /etc/network/interfaces: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* (this path is empty) # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address x.x.x.x netmask 255.255.252.0 network x.x.x.x broadcast x.x.x.x gateway x.x.x.x # dns-* options are implemented by the resolvconf package, if installed dns-nameservers x.x.x.x 2016-06-22 20:37 GMT-03:00 Antony Stone <antony.st...@squid.open.source.it <mailto:antony.st...@squid.open.source.it> >: On Thursday 23 June 2016 at 01:22:45, Alejandro Cabrera Obed wrote: > #ifconfig > > eth0 Link encap:Ethernet HWaddr 00:50:53:b2:6e:88 > inet addr:10.17.133.114 Bcast:10.17.135.255 Mask:255.255.252.0 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 Well, that certainly confirms that IPv6 is disabled on your machine (from the lack of lines such as "inet6 addr:"). You say "I haven't disabled the IPv6 protocol, no references in /etc/default/grub neither in systcl asociated file." Something (or someone) has certainly disabled IPv6 on this machine, though. What are the outputs from: grep -v ^# /etc/default/networking cat /etc/network/interfaces ? Antony. -- "It is easy to be blinded to the essential uselessness of them by the sense of achievement you get from getting them to work at all. In other words - and this is the rock solid principle on which the whole of the Corporation's Galaxy-wide success is founded - their fundamental design flaws are completely hidden by their superficial design flaws." - Douglas Noel Adams Please reply to the list; please *don't* CC me. _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org <mailto:squid-users@lists.squid-cache.org> http://lists.squid-cache.org/listinfo/squid-users -- // Alejandro // -- // Alejandro //
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
