#ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:53:b2:6e:88
inet addr:10.17.133.114 Bcast:10.17.135.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4488 errors:0 dropped:96 overruns:0 frame:0
TX packets:986 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:328836 (321.1 KiB) TX bytes:434907 (424.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:78 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10397 (10.1 KiB) TX bytes:10397 (10.1 KiB)
May I have to avoid the use of pinger???
Because I have and older installation with Squid3 3.1.20 and no pinger is
present.
Thanks again!!!
2016-06-22 20:16 GMT-03:00 Antony Stone <antony.st...@squid.open.source.it>:
> On Thursday 23 June 2016 at 01:08:33, Alejandro Cabrera Obed wrote:
>
> > 2016/06/22 19:56:35| pinger: Unable to start ICMPv6 pinger.
> >
> > But after that the squid3 daemon runs OK.
>
> What's the output from "ifconfig" on that machine?
>
> Antony.
>
> --
> It may not seem obvious, but (6 x 5 + 5) x 5 - 55 equals 5!
>
> Please reply to the
> list;
> please *don't* CC
> me.
> _______________________________________________
> squid-users mailing list
> squid-users@lists.squid-cache.org
> http://lists.squid-cache.org/listinfo/squid-users
>
--
// Alejandro //
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
