Module Name: src
Committed By: bouyer
Date: Sun Oct 25 20:54:19 UTC 2015
Modified Files:
src/sys/arch/arm/allwinner: awin_board.c awin_debe.c awin_hdmi.c
awin_reg.h awin_tcon.c awin_var.h
src/sys/arch/evbarm/awin: awin_machdep.c
Log Message:
Snapshot of work in progress on support for multiple display outputs.
The display configuration comes from the fex script as defined
in http://linux-sunxi.org/Fex_Guide, section disp_init.
There is some code to convert lcd0_para/lcd1_para to properties but
it's not used yet.
At this time only mode 0 (debe0->tcon0->hdmi) works.
debe0->tcon1->hdmi and debe1->tcon0->hdmi both gives a valid HDMI
signal but completely blank screen. AWIN_TCON1_BLUEDATA gives a blue screen
in both cases so tcon1->hdmi works. I suspect that, for some reason
setups other than debe0->tcon0 are not configured properly, and
the tcon is reading all-1 bits instead of the expected debe output.
To generate a diff of this commit:
cvs rdiff -u -r1.39 -r1.40 src/sys/arch/arm/allwinner/awin_board.c
cvs rdiff -u -r1.16 -r1.17 src/sys/arch/arm/allwinner/awin_debe.c \
src/sys/arch/arm/allwinner/awin_hdmi.c
cvs rdiff -u -r1.80 -r1.81 src/sys/arch/arm/allwinner/awin_reg.h
cvs rdiff -u -r1.5 -r1.6 src/sys/arch/arm/allwinner/awin_tcon.c
cvs rdiff -u -r1.36 -r1.37 src/sys/arch/arm/allwinner/awin_var.h
cvs rdiff -u -r1.43 -r1.44 src/sys/arch/evbarm/awin/awin_machdep.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
