This is a SAS controller, I'm not mistaken? In my case, only sata, unfortunately
all servers leased 2018-01-25 20:12 GMT+02:00 Ian Collins <[email protected]>: > On 01/25/2018 05:01 PM, Tiraen wrote: > >> Good evening. >> I must admit, a little surprised. Recently I came across the fact that in >> the latest versions of the Dells T630/620 with PERC 330/730 stopped working >> with SmartOS install >> >> And with any settings of the controller: >> 1) passthrough >> 2) JBOD >> 3) etc >> >> And the situation is repeated even if, for example, to make the initial >> installation from the image loaded through IDRAC >> ~At the beginning of work with disks the dump from Attach >> >> I have about 60 hosts with different types of DELLS, But this behavior I >> see for the first time >> >> The last time a multi-disk server was installed in November 2016 and then >> 330 PERC worked fine in passthrough >> >> No one has encountered such a problem? I will be grateful for the answer >> > > Nothing that bad but I have found PERC controllers are a pain in the arse > to deal with. In my case it was random lockups. > > We are replacing all PERC controllers with HBA330s ( > http://i.dell.com/sites/doccontent/shared-content/data- > sheets/en/Documents/dell-poweredge-hba330.pdf) which Dell sells for a > surprisingly low price. > > I would recommend these for all new Dell systems. > > Cheers, > Ian. > -- With best regards, Vyacheslav Yakushev, Unix system administrator https://t.me/kelewind ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
