Smartctl result from a surface pro 3.

With best Regards
Marko

=== START OF INFORMATION SECTION ===
Device Model:     HFS256G3AMNB-2200A
Firmware Version: 1010BL00
User Capacity:    256.060.514.304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan 05 10:02:29 2016 MZ
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    3) seconds.
Offline data collection
capabilities:                    (0x19) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  17) minutes.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   166   166   006    -    0
  5 Reallocated_Sector_Ct   -O--CK   253   253   036    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    2826
 12 Power_Cycle_Count       -O--CK   100   100   020    -    97
100 Unknown_Attribute       -O--CK   100   100   000    -    3734995
171 Unknown_Attribute       -O--CK   253   253   000    -    0
172 Unknown_Attribute       -O--CK   253   253   000    -    0
174 Unknown_Attribute       ----CK   100   100   000    -    21
175 Program_Fail_Count_Chip -O--CK   253   253   000    -    0
176 Erase_Fail_Count_Chip   -O--CK   253   253   000    -    0
177 Wear_Leveling_Count     -O--CK   100   100   000    -    3363008
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   000    -    11
179 Used_Rsvd_Blk_Cnt_Tot   -O--CK   100   100   000    -    54
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK   100   100   000    -    5258
181 Program_Fail_Cnt_Total  -O--CK   253   253   000    -    0
182 Erase_Fail_Count_Total  -O--CK   253   253   000    -    0
183 Runtime_Bad_Block       -O--CK   253   253   000    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    62
188 Command_Timeout         -O--CK   253   253   000    -    0
191 Unknown_SSD_Attribute   -O--CK   253   253   000    -    0
194 Temperature_Celsius     -O----   034   000   000    -    34 (Min/Max 22/127)
195 Hardware_ECC_Recovered  -O--CK   100   100   000    -    62402551
201 Unknown_SSD_Attribute   -OSR--   100   100   000    -    0
204 Soft_ECC_Correction     -OSR--   100   100   ---    -    0
231 Temperature_Celsius     PO--CK   253   253   ---    -    0
234 Unknown_Attribute       -O--CK   100   100   ---    -    13174
241 Total_LBAs_Written      -O--CK   100   100   ---    -    2531
242 Total_LBAs_Read         -O--CK   100   100   ---    -    1844
250 Read_Error_Retry_Rate   -O--CK   100   100   ---    -    2917
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      4  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2531 (device log contains only the most recent 20 errors)
        CR     = Command Register
        FEATR  = Features Register
        COUNT  = Count (was: Sector Count) Register
        LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
        LH     = LBA High (was: Cylinder High) Register    ]   LBA
        LM     = LBA Mid (was: Cylinder Low) Register      ] Register
        LL     = LBA Low (was: Sector Number) Register     ]
        DV     = Device (was: Device/Head) Register
        DC     = Device Control Register
        ER     = Error register
        ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2531 [10] occurred at disk power-on lifetime: 2825 hours (117 days + 17 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 51 00 00 00 00 00 00 00 00 a0 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b1 00 c1 00 00 00 00 00 00 00 00 a0 a0     00:00:25.620  DEVICE CONFIGURATION 
FREEZE LOCK [OBS-ACS-3]
  f5 00 00 00 00 00 00 00 00 00 00 a0 a0     00:00:25.620  SECURITY FREEZE LOCK
  ef 00 10 00 06 00 00 00 00 00 00 a0 a0     00:00:25.620  SET FEATURES [Enable 
SATA feature]
  2f 00 00 00 01 00 00 00 00 00 04 e0 e0     00:00:25.440  READ LOG EXT
  2f 00 00 00 01 00 00 00 00 00 00 e0 e0     00:00:25.440  READ LOG EXT

Error 2530 [9] occurred at disk power-on lifetime: 2825 hours (117 days + 17 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 01 00 00 00 57 15 88 40 40     00:00:24.010  READ DMA EXT
  25 00 00 00 18 00 00 00 57 15 70 40 40     00:00:24.010  READ DMA EXT
  25 00 00 00 40 00 00 00 74 94 c0 40 40     00:00:24.010  READ DMA EXT
  25 00 00 00 40 00 00 00 73 b5 00 40 40     00:00:24.010  READ DMA EXT
  25 00 00 00 46 00 00 00 56 11 a8 40 40     00:00:24.010  READ DMA EXT

Error 2529 [8] occurred at disk power-on lifetime: 2825 hours (117 days + 17 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 2528 [7] occurred at disk power-on lifetime: 2824 hours (117 days + 16 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 51 00 00 00 00 00 00 00 00 a0 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b1 00 c1 00 00 00 00 00 00 00 00 a0 a0     00:00:25.590  DEVICE CONFIGURATION 
FREEZE LOCK [OBS-ACS-3]
  f5 00 00 00 00 00 00 00 00 00 00 a0 a0     00:00:25.590  SECURITY FREEZE LOCK
  ef 00 10 00 06 00 00 00 00 00 00 a0 a0     00:00:25.590  SET FEATURES [Enable 
SATA feature]
  2f 00 00 00 01 00 00 00 00 00 04 e0 e0     00:00:25.400  READ LOG EXT
  2f 00 00 00 01 00 00 00 00 00 00 e0 e0     00:00:25.400  READ LOG EXT

Error 2527 [6] occurred at disk power-on lifetime: 2824 hours (117 days + 16 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 01 00 00 00 57 15 88 40 40     00:00:23.990  READ DMA EXT
  25 00 00 00 18 00 00 00 57 15 70 40 40     00:00:23.990  READ DMA EXT
  25 00 00 00 40 00 00 00 74 94 c0 40 40     00:00:23.990  READ DMA EXT
  25 00 00 00 40 00 00 00 73 b5 00 40 40     00:00:23.990  READ DMA EXT
  25 00 00 00 46 00 00 00 56 11 a8 40 40     00:00:23.990  READ DMA EXT

Error 2526 [5] occurred at disk power-on lifetime: 2824 hours (117 days + 16 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 2525 [4] occurred at disk power-on lifetime: 2822 hours (117 days + 14 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 51 00 00 00 00 00 00 00 00 a0 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b1 00 c1 00 00 00 00 00 00 00 00 a0 a0     00:00:25.580  DEVICE CONFIGURATION 
FREEZE LOCK [OBS-ACS-3]
  f5 00 00 00 00 00 00 00 00 00 00 a0 a0     00:00:25.580  SECURITY FREEZE LOCK
  ef 00 10 00 06 00 00 00 00 00 00 a0 a0     00:00:25.580  SET FEATURES [Enable 
SATA feature]
  2f 00 00 00 01 00 00 00 00 00 04 e0 e0     00:00:25.400  READ LOG EXT
  2f 00 00 00 01 00 00 00 00 00 00 e0 e0     00:00:25.400  READ LOG EXT

Error 2524 [3] occurred at disk power-on lifetime: 2822 hours (117 days + 14 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 01 00 00 00 57 15 88 40 40     00:00:23.930  READ DMA EXT
  25 00 00 00 18 00 00 00 57 15 70 40 40     00:00:23.930  READ DMA EXT
  25 00 00 00 40 00 00 00 74 94 c0 40 40     00:00:23.930  READ DMA EXT
  25 00 00 00 40 00 00 00 73 b5 00 40 40     00:00:23.930  READ DMA EXT
  25 00 00 00 46 00 00 00 56 11 a8 40 40     00:00:23.930  READ DMA EXT

SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%      2824         -
# 2  Short offline       Completed without error       00%      2413         -
# 3  Short offline       Completed without error       00%      2369         -
# 4  Short offline       Completed without error       00%      2363         -
# 5  Short offline       Completed without error       00%      2350         -
# 6  Short offline       Completed without error       00%      2346         -
# 7  Short offline       Completed without error       00%      2342         -
# 8  Extended offline    Completed without error       00%      2318         -
# 9  Short offline       Completed without error       00%      2314         -
#10  Short offline       Completed without error       00%      2309         -
#11  Short offline       Completed without error       00%      2302         -
#12  Short offline       Completed without error       00%      2291         -
#13  Short offline       Completed without error       00%      2279         -
#14  Short offline       Completed without error       00%      2268         -
#15  Short offline       Completed without error       00%      2257         -
#16  Short offline       Completed without error       00%      2243         -
#17  Short offline       Completed without error       00%      2230         -
#18  Short offline       Completed without error       00%      2217         -
#19  Short offline       Completed without error       00%      2204         -
#20  Short offline       Completed without error       00%      2191         -
#21  Short offline       Completed without error       00%      2178         -
#22  Short offline       Completed without error       00%      2165         -
#23  Short offline       Completed without error       00%      2151         -
#24  Short offline       Completed without error       00%      2137         -
#25  Short offline       Completed without error       00%      2124         -

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page Offset Size         Value  Description
  1  =====  =                =  == General Statistics (empty) ==
  4  =====  =                =  == General Errors Statistics (empty) ==
  5  =====  =                =  == Temperature Statistics (empty) ==
  6  =====  =                =  == Transport Statistics (empty) ==
  7  =====  =                =  == Solid State Device Statistics (empty) ==

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x000a  2            0  Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to