*ICY BOX IB-AC603a-U3 (USB3.0 to 2.5'' SATA Adapter) : smartctl -a -d
sat /dev/sdd (tested with Linux 3.2)
*
Output :
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-95-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..52GSX
Device Model: TOSHIBA MK2552GSX
Serial Number: 78DNT0MVT
LU WWN Device Id: 5 000039 121b01718
Firmware Version: LV011C
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Dec 16 16:50:20 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 100) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail
Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail
Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail
Always - 1666
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 1658
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 075 075 000 Old_age
Always - 10331
10 Spin_Retry_Count 0x0013 133 100 030 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 1649
184 End-to-End_Error 0x0032 001 001 001 Old_age Always
FAILING_NOW 1292
187 Reported_Uncorrect 0x0032 001 001 000 Old_age
Always - 1292
188 Command_Timeout 0x0032 100 097 000 Old_age
Always - 27
189 High_Fly_Writes 0x003a 100 100 001 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 073 045 045 Old_age Always
In_the_past 27 (Min/Max 24/27)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 34
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age
Always - 84411656
193 Load_Cycle_Count 0x0032 066 066 000 Old_age
Always - 341170
194 Temperature_Celsius 0x0022 100 100 000 Old_age
Always - 27 (Min/Max 15/55)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 155
220 Disk_Shift 0x0002 100 100 000 Old_age
Always - 73
222 Loaded_Hours 0x0032 088 088 000 Old_age
Always - 5184
223 Load_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age
Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age
Always - 339
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail
Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1554 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1554 occurred at disk power-on lifetime: 9972 hours (415 days + 12
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 67 22 a8 42 Error: UNC 8 sectors at LBA = 0x02a82267 = 44573287
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 67 22 a8 40 00 00:37:00.241 READ DMA EXT
35 00 08 c7 c6 2a 40 00 00:37:00.241 WRITE DMA EXT
35 00 68 57 c7 42 40 00 00:37:00.240 WRITE DMA EXT
25 00 08 67 22 a8 40 00 00:36:56.244 READ DMA EXT
25 00 08 47 28 80 40 00 00:36:56.243 READ DMA EXT
Error 1553 occurred at disk power-on lifetime: 9972 hours (415 days + 12
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 67 22 a8 42 Error: UNC 8 sectors at LBA = 0x02a82267 = 44573287
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 67 22 a8 40 00 00:36:56.244 READ DMA EXT
25 00 08 47 28 80 40 00 00:36:56.243 READ DMA EXT
25 00 08 5f 22 a8 40 00 00:36:56.243 READ DMA EXT
25 00 08 3f 28 80 40 00 00:36:56.243 READ DMA EXT
25 00 08 37 28 80 40 00 00:36:56.242 READ DMA EXT
Error 1552 occurred at disk power-on lifetime: 9972 hours (415 days + 12
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 67 22 a8 42 Error: UNC 24 sectors at LBA = 0x02a82267 =
44573287
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 5f 22 a8 40 00 00:36:51.735 READ DMA EXT
25 00 08 97 9a a1 40 00 00:36:51.735 READ DMA EXT
25 00 10 7f 9a a1 40 00 00:36:51.735 READ DMA EXT
25 00 08 77 9a a1 40 00 00:36:51.735 READ DMA EXT
25 00 08 5f 9a a1 40 00 00:36:51.733 READ DMA EXT
Error 1551 occurred at disk power-on lifetime: 9972 hours (415 days + 12
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 67 22 a8 42 Error: UNC 24 sectors at LBA = 0x02a82267 =
44573287
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 5f 22 a8 40 00 00:36:47.675 READ DMA EXT
25 00 18 3f 1f a8 40 00 00:36:47.674 READ DMA EXT
25 00 08 0f 33 9a 40 00 00:36:47.674 READ DMA EXT
25 00 08 ff 32 9a 40 00 00:36:47.674 READ DMA EXT
25 00 08 b7 99 a1 40 00 00:36:47.674 READ DMA EXT
Error 1550 occurred at disk power-on lifetime: 9972 hours (415 days + 12
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 67 22 a8 42 Error: UNC 8 sectors at LBA = 0x02a82267 = 44573287
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 67 22 a8 40 00 00:36:43.196 READ DMA EXT
35 00 08 c7 d3 3a 40 00 00:36:43.196 WRITE DMA EXT
35 00 08 0f 21 80 40 00 00:36:43.195 WRITE DMA EXT
35 00 30 67 c6 42 40 00 00:36:43.195 WRITE DMA EXT
35 00 08 3f 20 80 40 00 00:36:43.194 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
# 2 Short offline Completed without error 00% 3 -
# 3 Short offline Completed without error 00% 2 -
# 4 Short offline Completed without error 00% 1 -
# 5 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Medion HDDrive2Go (250 GB, 3.5'') : smartctl 5.41 2011-06-09 r3365
[i686-linux-3.2.0-96-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE
Device Model: WDC WD2500JB-00GVC0
Serial Number: WD-WCAL78726598
Firmware Version: 08.02D08
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Dec 17 08:53:55 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6942) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 88) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 128 125 021 Pre-fail
Always - 6141
4 Start_Stop_Count 0x0032 096 096 040 Old_age
Always - 4282
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age
Always - 9577
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age
Always - 4282
194 Temperature_Celsius 0x0022 129 090 000 Old_age
Always - 21
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age
Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age
Always - 14
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
*Medion HDDrive2Go (250 GB, 3.5'') : smartctl -a -d usbcypress /dev/sdf
**(tested with Linux 3.2)*
Output :
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-96-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE
Device Model: WDC WD2500JB-00GVC0
Serial Number: WD-WCAL78726598
Firmware Version: 08.02D08
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Dec 17 08:53:55 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6942) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 88) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 128 125 021 Pre-fail
Always - 6141
4 Start_Stop_Count 0x0032 096 096 040 Old_age
Always - 4282
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age
Always - 9577
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age
Always - 4282
194 Temperature_Celsius 0x0022 129 090 000 Old_age
Always - 21
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age
Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age
Always - 14
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
*WD Elements (1TB, 2.5'') :* *smartctl -a -d sat /dev/sdh **(tested with
Linux 3.2)
*
Output:
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-96-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD10JMVW-11AJGS2
Serial Number: WD-WX61EC3KUF30
LU WWN Device Id: 5 0014ee 6047066b7
Firmware Version: 01.01A01
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Dec 17 09:41:21 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (17640) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 198) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 124 124 021 Pre-fail
Always - 4783
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 24
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 9
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 24
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 10
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 212
194 Temperature_Celsius 0x0022 126 109 000 Old_age
Always - 21
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
