Great project, Thanks. Please add in drivedb.h...
-- after the line -- "SanDisk SSD U100 ([0-9]*GB|SMG2)|" // tested with SanDisk SSD U100 8GB/10.56.00, 256GB/10.01.02, SMG2/10.56.04 -- add -- "SanDisk SSD U110 [0-9]*GB|" // tested with SanDisk SSD U110 32GB/U221000 -- With that change, only Attribute ID #165 is unknown. While using SanDisk's SSD DASHBOARD (Windows app) it identified Attribute #165 as: -- #165 "Total Write/Erase Count" -- So, by also adding the following line in the SanDisk U100, U110, etc. section -- add line -- "-v 165,raw48,Total_Write_Erase_Count " -- Ref: http://www.sandisk.com/products/ssd/sata/u110/ pbx4 ~ # smartctl -q noserial -x /dev/sda smartctl 6.3 2014-07-26 r3976 [i686-linux-3.2.62-astlinux] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SanDisk SSD U110 32GB Firmware Version: U221000 User Capacity: 32,017,047,552 bytes [32.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 1.8 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 27 12:22:55 2014 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 7) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 44 12 Power_Cycle_Count -O---- 100 100 000 - 14 165 Unknown_Attribute -O---- 100 100 000 - 4013 171 Unknown_Attribute -O---- 100 100 000 - 0 172 Unknown_Attribute -O---- 100 100 000 - 0 173 Unknown_Attribute -O---- 100 100 000 - 1 174 Unknown_Attribute -O---- 100 100 000 - 10 187 Reported_Uncorrect -O---- 100 100 000 - 0 194 Temperature_Celsius -O---K 052 048 000 - 48 (Min/Max 22/51) 230 Unknown_SSD_Attribute -O---- 100 100 000 - 3 232 Available_Reservd_Space PO---- 100 100 005 - 0 234 Unknown_Attribute -O---- 100 100 000 - 0 241 Total_LBAs_Written -O---- 100 100 000 - 1373571 242 Total_LBAs_Read -O---- 100 100 000 - 43187738 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xa2 GPL,SL VS 2 Device vendor specific log 0xa3 GPL,SL VS 1 Device vendor specific log 0xa6-0xa7 GPL,SL VS 255 Device vendor specific log Warning! SMART Extended Comprehensive Error Log Structure (16/16) error: invalid SMART checksum. SMART Extended Comprehensive Error Log Version: 1 (16 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 44 - # 2 Short offline Completed without error 00% 29 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Description 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 48 Current Temperature 5 0x010 1 48 Average Short Term Temperature 5 0x018 1 - Average Long Term Temperature 5 0x020 1 50 Highest Temperature 5 0x028 1 36 Lowest Temperature 5 0x030 1 48 Highest Average Short Term Temperature 5 0x038 1 48 Lowest Average Short Term Temperature 5 0x040 1 - Highest Average Long Term Temperature 5 0x048 1 - Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 95 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 0~ Percentage Used Endurance Indicator |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 41 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 35 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0001 2 0 Command failed due to ICRC error ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
