Update, While using SanDisk's SSD DASHBOARD (Windows app) it identified Attribute #165 as: -- #165 "Total Write/Erase Count" --
So, by also adding the following line in the SanDisk U100, U110, etc. section -- add line -- "-v 165,raw48,Total_Write_Erase_Count " -- together with the changes below, all the attributes are now labeled. Lonnie On Oct 27, 2014, at 12:31 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> wrote: > Great project, Thanks. > > Please add in drivedb.h... > > -- after the line -- > "SanDisk SSD U100 ([0-9]*GB|SMG2)|" // tested with SanDisk SSD U100 > 8GB/10.56.00, 256GB/10.01.02, SMG2/10.56.04 > -- add -- > "SanDisk SSD U110 [0-9]*GB|" // tested with SanDisk SSD U110 > 32GB/U221000 > -- > With that change, only Attribute ID #165 is unknown. > > Ref: http://www.sandisk.com/products/ssd/sata/u110/ > > pbx4 ~ # smartctl -q noserial -x /dev/sda > smartctl 6.3 2014-07-26 r3976 [i686-linux-3.2.62-astlinux] (local build) > Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF INFORMATION SECTION === > Device Model: SanDisk SSD U110 32GB > Firmware Version: U221000 > User Capacity: 32,017,047,552 bytes [32.0 GB] > Sector Size: 512 bytes logical/physical > Rotation Rate: Solid State Device > Form Factor: 1.8 inches > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: ACS-2 T13/2015-D revision 3 > SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) > Local Time is: Mon Oct 27 12:22:55 2014 CDT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > AAM feature is: Unavailable > APM feature is: Disabled > Rd look-ahead is: Enabled > Write cache is: Enabled > ATA Security is: Disabled, frozen [SEC2] > Wt Cache Reorder: Unavailable > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 120) seconds. > Offline data collection > capabilities: (0x51) SMART execute Offline immediate. > No Auto Offline data collection support. > Suspend Offline collection upon new > command. > No Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 7) minutes. > > SMART Attributes Data Structure revision number: 1 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE > 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 > 9 Power_On_Hours -O---- 100 100 000 - 44 > 12 Power_Cycle_Count -O---- 100 100 000 - 14 > 165 Unknown_Attribute -O---- 100 100 000 - 4013 > 171 Unknown_Attribute -O---- 100 100 000 - 0 > 172 Unknown_Attribute -O---- 100 100 000 - 0 > 173 Unknown_Attribute -O---- 100 100 000 - 1 > 174 Unknown_Attribute -O---- 100 100 000 - 10 > 187 Reported_Uncorrect -O---- 100 100 000 - 0 > 194 Temperature_Celsius -O---K 052 048 000 - 48 (Min/Max > 22/51) > 230 Unknown_SSD_Attribute -O---- 100 100 000 - 3 > 232 Available_Reservd_Space PO---- 100 100 005 - 0 > 234 Unknown_Attribute -O---- 100 100 000 - 0 > 241 Total_LBAs_Written -O---- 100 100 000 - 1373571 > 242 Total_LBAs_Read -O---- 100 100 000 - 43187738 > ||||||_ K auto-keep > |||||__ C event count > ||||___ R error rate > |||____ S speed/performance > ||_____ O updated online > |______ P prefailure warning > > General Purpose Log Directory Version 1 > SMART Log Directory Version 1 [multi-sector log support] > Address Access R/W Size Description > 0x00 GPL,SL R/O 1 Log Directory > 0x01 GPL,SL R/O 1 Summary SMART error log > 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log > 0x04 GPL,SL R/O 8 Device Statistics log > 0x06 GPL,SL R/O 1 SMART self-test log > 0x09 GPL,SL R/W 1 Selective self-test log > 0x10 GPL,SL R/O 1 NCQ Command Error log > 0x11 GPL,SL R/O 1 SATA Phy Event Counters > 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log > 0x80-0x9f GPL,SL R/W 16 Host vendor specific log > 0xa1 GPL,SL VS 1 Device vendor specific log > 0xa2 GPL,SL VS 2 Device vendor specific log > 0xa3 GPL,SL VS 1 Device vendor specific log > 0xa6-0xa7 GPL,SL VS 255 Device vendor specific log > > Warning! SMART Extended Comprehensive Error Log Structure (16/16) error: > invalid SMART checksum. > SMART Extended Comprehensive Error Log Version: 1 (16 sectors) > No Errors Logged > > SMART Extended Self-test Log (GP Log 0x07) not supported > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Short offline Completed without error 00% 44 - > # 2 Short offline Completed without error 00% 29 - > # 3 Short offline Completed without error 00% 0 - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > SCT Commands not supported > > Device Statistics (GP Log 0x04) > Page Offset Size Value Description > 5 ===== = = == Temperature Statistics (rev 1) == > 5 0x008 1 48 Current Temperature > 5 0x010 1 48 Average Short Term Temperature > 5 0x018 1 - Average Long Term Temperature > 5 0x020 1 50 Highest Temperature > 5 0x028 1 36 Lowest Temperature > 5 0x030 1 48 Highest Average Short Term Temperature > 5 0x038 1 48 Lowest Average Short Term Temperature > 5 0x040 1 - Highest Average Long Term Temperature > 5 0x048 1 - Lowest Average Long Term Temperature > 5 0x050 4 0 Time in Over-Temperature > 5 0x058 1 95 Specified Maximum Operating Temperature > 5 0x060 4 0 Time in Under-Temperature > 5 0x068 1 0 Specified Minimum Operating Temperature > 7 ===== = = == Solid State Device Statistics (rev 1) == > 7 0x008 1 0~ Percentage Used Endurance Indicator > |_ ~ normalized value > > SATA Phy Event Counters (GP Log 0x11) > ID Size Value Description > 0x0003 2 0 R_ERR response for device-to-host data FIS > 0x0004 2 0 R_ERR response for host-to-device data FIS > 0x0006 2 0 R_ERR response for device-to-host non-data FIS > 0x0007 2 0 R_ERR response for host-to-device non-data FIS > 0x0009 2 41 Transition from drive PhyRdy to drive PhyNRdy > 0x000a 2 35 Device-to-host register FISes sent due to a COMRESET > 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC > 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC > 0x0001 2 0 Command failed due to ICRC error > > > ------------------------------------------------------------------------------ > _______________________________________________ > Smartmontools-database mailing list > Smartmontools-database@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/smartmontools-database > > ------------------------------------------------------------------------------ _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
