#############################################################################


host:~# smartctl -a /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.5.1.el6.x86_64] 
(local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     INTEL SSDSC2BB480G4T
Serial Number:    BTWL3283018H480QGN
LU WWN Device Id: 5 001517 8f367085d
Firmware Version: D201DL10
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Mar 16 12:43:28 2014 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                         was never started.
                                         Auto Offline Data Collection: 
Disabled.
Self-test execution status:      (   0) The previous self-test routine 
completed
                                         without error or no self-test has 
ever
                                         been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                         No Auto Offline data collection 
support.
                                         Suspend Offline collection upon 
new
                                         command.
                                         Offline surface scan supported.
                                         Self-test supported.
                                         Conveyance Self-test supported.
                                         Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                         power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                         General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  60) minutes.
Conveyance self-test routine
recommended polling time:        (  60) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                         SCT Error Recovery Control 
supported.
                                         SCT Feature Control supported.
                                         SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED 
WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000f   130   130   039    Pre-fail  Always 
-       54272293
   5 Reallocated_Sector_Ct   0x0033   093   093   001    Pre-fail  Always 
-       0
   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always 
-       139
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always 
-       7
  13 Read_Soft_Error_Rate    0x0032   070   070   000    Old_age   Always 
-       281470736015653
179 Used_Rsvd_Blk_Cnt_Tot   0x0033   100   100   010    Pre-fail  Always 
-       0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032   100   100   000    Old_age   Always 
-       5955
181 Program_Fail_Cnt_Total  0x003a   100   100   ---    Old_age   Always 
-       0
182 Erase_Fail_Count_Total  0x003a   100   100   ---    Old_age   Always 
-       0
184 End-to-End_Error        0x0032   100   100   000    Old_age   Always 
-       0
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always 
-       17
195 Hardware_ECC_Recovered  0x0032   100   100   000    Old_age   Always 
-       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline 
-       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always 
-       0
201 Soft_Read_Error_Rate    0x0033   100   100   010    Pre-fail  Always 
-       4481417838
226 Load-in_Time            0x0032   100   100   000    Old_age   Always 
-       0
227 Torq-amp_Count          0x0032   100   100   000    Old_age   Always 
-       33
228 Power-off_Retract_Count 0x0032   100   100   000    Old_age   Always 
-       2845
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always 
-       4660
245 Unknown_Attribute       0x0032   100   100   000    Old_age   Always 
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute 
delay.

host:~#

#############################################################################

Regards,


Dan.


--
Dan The Man
CEO & Founder
Websites, Domains and Everything Else
http://www.SunSaturn.com/aboutus.php
Email: d...@sunsaturn.com
Toll Free: 1-800-843-1698

------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/13534_NeoTech
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to