Hello.
The Seagate 600 SSD does not appear in the smartmontools database. I tried
to update the database but got the following error:
"/var/lib/smartmontools/drivedb/drivedb.h.error: rejected by
/usr/sbin/smartctl, probably no longer compatible"
(yet I'm using smartmontools 6.2)
Anyway, I checked the database, the Seagate 600 does not appear.
Attached please find the output of smartctl -x /dev/sdX.
Please note that attribute 234 is unknown - alarmingly, "Disks" (formerly
palimpsest) refers to this as "uncorrectable ECC count". Of course I'm
aware that this is different software than smartmontools - it would be nice
if smartmontools could correctly identify this attribute to put a "Disks"
user's mind at ease.
Note also there is some speculation that attributes 241 and 242 have
inaccurate descriptions and should instead read "Host_Writes_32MiB" and
"Host_Reads_32MiB". See http://www.dslreports.com/forum/r28871294-
Thank you for your assistance, and thank you for smartmontools!
# smartctl -x /dev/sda
smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST240HM000
Serial Number: Z4N0019M
LU WWN Device Id: 5 000c50 02ff05290
Firmware Version: C675
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 9 09:08:52 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 38) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
9 Power_On_Hours -O--CK 100 100 000 - 103
12 Power_Cycle_Count -O--CK 100 100 020 - 6
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 035 000 000 - 35 (Min/Max 21/57)
201 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
204 Soft_ECC_Correction -O--CK 100 100 000 - 0
231 Temperature_Celsius PO--C- 100 100 010 - 0
234 Unknown_Attribute -O--CK 100 100 000 - 1033
241 Total_LBAs_Written -O--CK 100 100 000 - 372
242 Total_LBAs_Read -O--CK 100 100 000 - 130
250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x07 GPL,SL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa8 GPL VS 1041 Device vendor specific log
0xa8 SL VS 255 Device vendor specific log
0xb7 GPL,SL VS 4 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 26 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 26 [5] occurred at disk power-on lifetime: 92 hours (3 days + 20 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 2d+08:54:28.180 SET FEATURES [Enable
APM]
60 00 08 00 28 00 00 06 81 11 98 40 08 2d+08:54:28.180 READ FPDMA QUEUED
60 00 08 00 10 00 00 0f 01 09 08 40 08 2d+08:54:28.180 READ FPDMA QUEUED
60 00 08 00 08 00 00 0a 81 33 90 40 08 2d+08:54:28.180 READ FPDMA QUEUED
60 00 90 00 20 00 00 00 3b f4 00 40 08 2d+08:54:28.180 READ FPDMA QUEUED
Error 25 [4] occurred at disk power-on lifetime: 92 hours (3 days + 20 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 2d+08:46:04.300 SET FEATURES [Enable
APM]
60 00 88 00 00 00 00 08 04 34 98 40 08 2d+08:46:04.300 READ FPDMA QUEUED
60 00 08 00 b8 00 00 0b 01 23 f0 40 08 2d+08:46:04.300 READ FPDMA QUEUED
60 00 28 00 b0 00 00 0a 84 cd e0 40 08 2d+08:46:04.300 READ FPDMA QUEUED
60 00 08 00 a8 00 00 0d 01 1e 00 40 08 2d+08:46:04.300 READ FPDMA QUEUED
Error 24 [3] occurred at disk power-on lifetime: 38 hours (1 days + 14 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 03:08:53.910 SET FEATURES [Enable
APM]
60 00 08 00 30 00 00 06 81 0a 70 40 08 03:08:53.910 READ FPDMA QUEUED
60 00 08 00 28 00 00 0d 05 c9 f0 40 08 03:08:53.910 READ FPDMA QUEUED
60 00 28 00 20 00 00 0d 05 c9 c8 40 08 03:08:53.910 READ FPDMA QUEUED
60 00 08 00 18 00 00 0d c1 0a a8 40 08 03:08:53.910 READ FPDMA QUEUED
Error 23 [2] occurred at disk power-on lifetime: 38 hours (1 days + 14 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 03:02:39.590 SET FEATURES [Enable
APM]
60 00 08 00 80 00 00 0d 81 0d 10 40 08 03:02:39.590 READ FPDMA QUEUED
60 00 08 00 78 00 00 0a 41 24 60 40 08 03:02:39.590 READ FPDMA QUEUED
60 00 18 00 70 00 00 0d 4a 9a c0 40 08 03:02:39.590 READ FPDMA QUEUED
60 00 08 00 68 00 00 0d 4a 99 88 40 08 03:02:39.590 READ FPDMA QUEUED
Error 22 [1] occurred at disk power-on lifetime: 35 hours (1 days + 11 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 00:00:31.980 SET FEATURES [Enable
APM]
60 00 18 00 00 00 00 00 48 98 70 40 08 00:00:31.980 READ FPDMA QUEUED
60 00 30 00 00 00 00 08 04 4c b8 40 08 00:00:31.970 READ FPDMA QUEUED
60 00 20 00 00 00 00 08 04 4c 98 40 08 00:00:31.970 READ FPDMA QUEUED
61 00 08 00 00 00 00 06 84 61 20 40 08 00:00:31.970 WRITE FPDMA QUEUED
Error 21 [0] occurred at disk power-on lifetime: 32 hours (1 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 17:42:53.870 SET FEATURES [Enable
APM]
60 00 08 00 70 00 00 00 41 0e 70 40 08 17:42:53.870 READ FPDMA QUEUED
60 00 20 00 68 00 00 0a 84 ce 80 40 08 17:42:53.870 READ FPDMA QUEUED
60 00 08 00 60 00 00 0b c1 24 88 40 08 17:42:53.870 READ FPDMA QUEUED
60 00 48 00 58 00 00 0d 05 d6 68 40 08 17:42:53.870 READ FPDMA QUEUED
Error 20 [19] occurred at disk power-on lifetime: 23 hours (0 days + 23 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 08:28:25.660 SET FEATURES [Enable
APM]
60 00 08 00 50 00 00 0d 4a 8d b0 40 08 08:28:25.650 READ FPDMA QUEUED
60 00 18 00 00 00 00 0d 4a 8d 90 40 08 08:28:25.650 READ FPDMA QUEUED
60 00 08 00 38 00 00 06 84 35 a8 40 08 08:28:25.650 READ FPDMA QUEUED
60 00 50 00 40 00 00 0d 4a 96 88 40 08 08:28:25.650 READ FPDMA QUEUED
Error 19 [18] occurred at disk power-on lifetime: 22 hours (0 days + 22 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 fe 00 00 00 00 00 00 40 08 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 05 00 fe 00 00 00 00 00 00 40 08 08:02:40.010 SET FEATURES [Enable
APM]
60 00 08 00 48 00 00 0d 41 1a 38 40 08 08:02:40.010 READ FPDMA QUEUED
60 00 08 00 40 00 00 00 46 f8 b0 40 08 08:02:40.010 READ FPDMA QUEUED
60 00 08 00 38 00 00 0a 01 0b 10 40 08 08:02:40.010 READ FPDMA QUEUED
60 00 08 00 30 00 00 06 81 09 10 40 08 08:02:40.010 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 103 -
# 2 Extended offline Completed without error 00% 43 -
# 3 Short offline Completed without error 00% 43 -
# 4 Short offline Completed without error 00% 22 -
# 5 Extended offline Aborted by host 00% 22 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 6 Lifetime Power-On Resets
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 515 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
