Dear smartmontools-database@lists.sourceforge.net,

Attached is APPLE_HDD_HTS545050A7E362_TNS51949JDG8NL_2013-12-02.txt for apple-branded Hitachi drive in late 2012 mac mini.

I think just need to add "Hitachi|APPLE HDD) to existing HGST per below:

{ "Hitachi/HGST Travelstar Z5K500", // tested with HGST HTS545050A7E380/GG2OA$
    "(Hitachi|APPLE HDD) HGST HT[ES]5450(25|32|50)A7E38[01]",
    "", "", ""
  },

--Thanks, Bill Day
smartctl 6.2 2013-07-26 r3841 [x86_64-apple-darwin13.0.0] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     APPLE HDD HTS545050A7E362
Serial Number:    TNS51949JDG8NL
LU WWN Device Id: 5 000cca 73ae1d910
Firmware Version: GG2AB990
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Dec  2 14:21:04 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (   45) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 114) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       
-       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      
-       0
  3 Spin_Up_Time            0x0007   214   214   033    Pre-fail  Always       
-       1
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       
-       1536
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       
-       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      
-       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       
-       182
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       1536
160 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       0
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       
-       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       
-       4
193 Load_Cycle_Count        0x0012   099   099   000    Old_age   Always       
-       10493
194 Temperature_Celsius     0x0002   171   171   000    Old_age   Always       
-       35 (Min/Max 15/49)
195 Hardware_ECC_Recovered  0x000a   100   100   000    Old_age   Always       
-       0
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       
-       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       
-       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       
-       9

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%       179         -
# 2  Short offline       Completed without error       00%       114         -
# 3  Extended offline    Completed without error       00%        91         -
# 4  Short offline       Completed without error       00%        82         -
# 5  Short offline       Completed without error       00%        66         -
# 6  Extended offline    Completed without error       00%        60         -
# 7  Short offline       Completed without error       00%        34         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT 
organizations don't have a clear picture of how application performance 
affects their revenue. With AppDynamics, you get 100% visibility into your 
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to