Please add to database:
ADATA SP300
HGST HTS541010A9E680
smartctl -q noserial -x /dev/sdX for twoo above in attachment.
--
Thanks
Damian Krasowski
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.17-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SP300
Firmware Version: 5.0.2d
User Capacity: 24,015,495,168 bytes [24,0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Dec 2 11:24:15 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Disabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Unexpected SCT status 0x0010 (action_code=4, function_code=2)
Wt Cache Reorder: N/A
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 117 050 - 167628128
5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0
9 Power_On_Hours -O--CK 000 000 000 - 7336 (33 204 0)
12 Power_Cycle_Count -O--CK 100 100 000 - 109
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
174 Unknown_Attribute ----CK 000 000 000 - 90
177 Wear_Leveling_Count ------ 000 000 000 - 3
181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0
182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 049 078 000 - 49 (Min/Max 23/78)
195 Hardware_ECC_Recovered --SRC- 120 120 000 - 167628128
196 Reallocated_Event_Count PO--CK 100 100 003 - 0
201 Unknown_SSD_Attribute --SRC- 120 120 000 - 167628128
204 Soft_ECC_Correction --SRC- 120 120 000 - 167628128
230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100
231 Temperature_Celsius PO--C- 100 100 010 - 0
233 Media_Wearout_Indicator ------ 000 000 000 - 1308
234 Unknown_Attribute -O--CK 000 000 000 - 1222
241 Total_LBAs_Written -O--CK 000 000 000 - 1222
242 Total_LBAs_Read -O--CK 000 000 000 - 28928
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Self-test routine in progress 20% 5028 -
# 2 Extended offline Self-test routine in progress 20% 5028 -
# 3 Extended offline Self-test routine in progress 30% 5028 -
# 4 Extended offline Self-test routine in progress 30% 5028 -
# 5 Extended offline Self-test routine in progress 30% 5028 -
# 6 Extended offline Self-test routine in progress 30% 5028 -
# 7 Extended offline Self-test routine in progress 30% 5028 -
# 8 Extended offline Self-test routine in progress 30% 5028 -
# 9 Extended offline Self-test routine in progress 40% 5028 -
#10 Extended offline Self-test routine in progress 50% 5028 -
#11 Extended offline Self-test routine in progress 50% 5028 -
#12 Extended offline Self-test routine in progress 60% 5028 -
#13 Extended offline Self-test routine in progress 60% 5028 -
#14 Extended offline Self-test routine in progress 90% 5028 -
#15 Extended offline Self-test routine in progress 10% 3695 -
#16 Extended offline Self-test routine in progress 10% 3695 -
#17 Extended offline Self-test routine in progress 10% 3695 -
#18 Extended offline Self-test routine in progress 10% 3695 -
#19 Extended offline Self-test routine in progress 10% 5028 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 49 Celsius
Power Cycle Min/Max Temperature: 47/58 Celsius
Lifetime Min/Max Temperature: 23/76 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 10 (Unknown, should be 2)
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: -82/118 Celsius
Min/Max Temperature Limit: -73/-63 Celsius
Temperature History Size (Index): 48384 (385)
Invalid Temperature History Size or Index
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 86 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 87 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.17-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HTS541010A9E680
Firmware Version: JA0OA560
User Capacity: 1,000,204,886,016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 2 11:24:30 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 222) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 182 182 033 - 1
4 Start_Stop_Count -O--C- 100 100 000 - 127
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 084 084 000 - 7174
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 127
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 18
193 Load_Cycle_Count -O--C- 085 085 000 - 152479
194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 22/57)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 5162 -
# 2 Extended offline Completed without error 00% 4967 -
# 3 Extended offline Completed without error 00% 3637 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 39 Celsius
Power Cycle Min/Max Temperature: 36/45 Celsius
Lifetime Min/Max Temperature: 22/57 Celsius
Lifetime Average Temperature: 40 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (73)
Index Estimated Time Temperature Celsius
74 2013-12-02 09:17 40 *********************
75 2013-12-02 09:18 40 *********************
76 2013-12-02 09:19 39 ********************
... ..( 3 skipped). .. ********************
80 2013-12-02 09:23 39 ********************
81 2013-12-02 09:24 40 *********************
82 2013-12-02 09:25 39 ********************
83 2013-12-02 09:26 39 ********************
84 2013-12-02 09:27 40 *********************
85 2013-12-02 09:28 39 ********************
86 2013-12-02 09:29 40 *********************
87 2013-12-02 09:30 40 *********************
88 2013-12-02 09:31 40 *********************
89 2013-12-02 09:32 39 ********************
90 2013-12-02 09:33 40 *********************
91 2013-12-02 09:34 39 ********************
92 2013-12-02 09:35 40 *********************
93 2013-12-02 09:36 39 ********************
94 2013-12-02 09:37 40 *********************
95 2013-12-02 09:38 40 *********************
96 2013-12-02 09:39 40 *********************
97 2013-12-02 09:40 39 ********************
... ..( 8 skipped). .. ********************
106 2013-12-02 09:49 39 ********************
107 2013-12-02 09:50 40 *********************
108 2013-12-02 09:51 39 ********************
... ..( 12 skipped). .. ********************
121 2013-12-02 10:04 39 ********************
122 2013-12-02 10:05 40 *********************
123 2013-12-02 10:06 40 *********************
124 2013-12-02 10:07 39 ********************
... ..( 2 skipped). .. ********************
127 2013-12-02 10:10 39 ********************
0 2013-12-02 10:11 40 *********************
1 2013-12-02 10:12 39 ********************
... ..( 22 skipped). .. ********************
24 2013-12-02 10:35 39 ********************
25 2013-12-02 10:36 40 *********************
26 2013-12-02 10:37 39 ********************
... ..( 46 skipped). .. ********************
73 2013-12-02 11:24 39 ********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 13 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
