Hi,
Frieder Ferlemann schrieb:
> I'm appending the output of smartctl -a after running smartctl -t short
> /dev/sda
Sorry, the attachment didn't stick.
Greetings,
Frieder
./smartctl -a /dev/sdb
smartctl 5.40 2010-02-18 r3069 [x86_64-suse-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: STT_FTM64GX25H
Serial Number: P612102-MIBY-208A052
Firmware Version: 1916
User Capacity: 64.023.257.088 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Feb 25 10:03:39 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 0) minutes.
Extended self-test routine
recommended polling time: ( 0) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 006 000 000 Old_age Offline
- 0
9 Power_On_Hours 0x0000 014 000 000 Old_age Offline
- 0
12 Power_Cycle_Count 0x0000 005 000 000 Old_age Offline
- 0
184 End-to-End_Error 0x0000 093 000 000 Old_age Offline
- 0
195 Hardware_ECC_Recovered 0x0000 000 000 000 Old_age Offline
- 0
196 Reallocated_Event_Count 0x0000 000 000 000 Old_age Offline
- 0
197 Current_Pending_Sector 0x0000 000 000 000 Old_age Offline
- 0
198 Offline_Uncorrectable 0x0000 118 097 000 Old_age Offline
- 424
199 UDMA_CRC_Error_Count 0x0000 179 236 000 Old_age Offline
- 1066
200 Multi_Zone_Error_Rate 0x0000 227 139 000 Old_age Offline
- 10
201 Soft_Read_Error_Rate 0x0000 165 193 000 Old_age Offline
- 18
202 Data_Address_Mark_Errs 0x0000 126 217 000 Old_age Offline
- 0
203 Run_Out_Cancel 0x0000 106 161 000 Old_age Offline
- 0
204 Soft_ECC_Correction 0x0000 000 000 000 Old_age Offline
- 0
205 Thermal_Asperity_Rate 0x0000 016 039 000 Old_age Offline
- 0
206 Flying_Height 0x0000 001 000 000 Old_age Offline
- 0
207 Spin_High_Current 0x0000 011 001 000 Old_age Offline
- 0
208 Spin_Buzz 0x0000 011 000 000 Old_age Offline
- 0
209 Offline_Seek_Performnce 0x0000 100 000 000 Old_age Offline
- 0
211 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
212 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
213 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
Warning: device does not support Error Logging
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
smartctl 5.40 2010-02-18 r3069 [x86_64-suse-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: STT_FTM64GX25H
Serial Number: P612102-MIBY-208A052
Firmware Version: 1916
User Capacity: 64.023.257.088 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Feb 25 10:03:51 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 0) minutes.
Extended self-test routine
recommended polling time: ( 0) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 006 000 000 Old_age Offline
- 0
9 Power_On_Hours 0x0000 014 000 000 Old_age Offline
- 0
12 Power_Cycle_Count 0x0000 005 000 000 Old_age Offline
- 0
184 End-to-End_Error 0x0000 093 000 000 Old_age Offline
- 0
195 Hardware_ECC_Recovered 0x0000 000 000 000 Old_age Offline
- 0
196 Reallocated_Event_Count 0x0000 000 000 000 Old_age Offline
- 0
197 Current_Pending_Sector 0x0000 000 000 000 Old_age Offline
- 0
198 Offline_Uncorrectable 0x0000 118 097 000 Old_age Offline
- 424
199 UDMA_CRC_Error_Count 0x0000 179 236 000 Old_age Offline
- 1066
200 Multi_Zone_Error_Rate 0x0000 227 139 000 Old_age Offline
- 10
201 Soft_Read_Error_Rate 0x0000 165 193 000 Old_age Offline
- 18
202 Data_Address_Mark_Errs 0x0000 126 217 000 Old_age Offline
- 0
203 Run_Out_Cancel 0x0000 106 161 000 Old_age Offline
- 0
204 Soft_ECC_Correction 0x0000 000 000 000 Old_age Offline
- 0
205 Thermal_Asperity_Rate 0x0000 016 039 000 Old_age Offline
- 0
206 Flying_Height 0x0000 001 000 000 Old_age Offline
- 0
207 Spin_High_Current 0x0000 011 001 000 Old_age Offline
- 0
208 Spin_Buzz 0x0000 011 000 000 Old_age Offline
- 0
209 Offline_Seek_Performnce 0x0000 100 000 000 Old_age Offline
- 0
211 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
212 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
213 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
Warning: device does not support Error Logging
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
