My SG-6 did indeed shut off at about 14.9 uS, at maximum, as measured
with my PWT. I tried adjusting wetted electrode depth, and electrode
spacing but still could not get above about 16 uS. Finally (I just spoke
to you on the phone the other day) I adjusted the trimpot, and now can
easily get 20 ppm or more. I haven't run a batch set at the lowest point
yet to see how my adjustment affected the lower end of the scale. But I
don't make EIS below 10 anyway, I'm just curious to see what the new
minimum is.
sol
Trem wrote:
Hi Ode,
I was wondering how you came to the conclusion our SG6 Auto generator
shuts off at 15 uS? Do you have one or do people send them to you
for your comment? That shutoff point is not my understanding. Each
unit is calibrated to the same shutoff point using a test jig to set
the "Low" and "High" shutoff points.
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Address Off-Topic messages to: [email protected]
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <[email protected]>
