I ended up moving it outside the firewall (I have 8 IPs from Qwest) and after two months of just sitting there Saturday morning it started working. I think that ATT has pushed out a updated that fixed a problem with the Qwest DSL. I'll try these settings behind the firewall.
Thanks, Sean On 08/29/2011 04:09 AM, Dave Kempe wrote: > > > On 11 August 2011 04:37, Sean Whitney <[email protected] > <mailto:[email protected]>> wrote: > > Has anyone successfully gotten a ATT Microcell to work behind shorewall? > > > One our our customers has an Optus HomeZone, which I think is the same > thing. > We just did this and it worked fine: > DNAT net loc:192.168.1.25 udp 123 > DNAT net loc:192.168.1.25 udp 4500 > DNAT net loc:192.168.1.25 udp 500 > > > I can put you in touch with the tech who went onsite if you like - he > said some other stuff on the thing itself needed to be done as well. > > Dave > > > > ------------------------------------------------------------------------------ > EMC VNX: the world's simplest storage, starting under $10K > The only unified storage solution that offers unified management > Up to 160% more powerful than alternatives and 25% more efficient. > Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev > > > > _______________________________________________ > Shorewall-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/shorewall-users -- If all printers were determined not to print anything till they were sure it would offend nobody, there would be very little printed. - Benjamin Franklin ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
