Has anyone successfully gotten a ATT Microcell to work behind shorewall?
I've been playing around with the IPSEC settings trying to get it
working with no avail.
Below is all the firewall configuration information that is available on
ATT webpage.
Configure the network to allow the following:
DHCP is on
Port Blocking is either turned off or allowing ports 4500 and 500
MTU size is set to 1492
MAC address filtering is either turned off or allowing the MAC address
of the AT&T 3G MicroCell
IPSec Pass-Through is Enabled
Block Fragmented Packets is Disabled
If using multiple routers, the 3G MicoCell must be connected to the
first router connected to the broadband modem
If the 3G MicroCell is connected to a router that is connected to a
modem and both the router and the modem have NAT (Network Address
Translation) enabled, disable NAT either in the router or the modem.
Ensure the modem / router is using the latest software (firmware).
Please see the manufacturer's documentation.
TCP/UDP Ports
NOTE: All ports listed need to be configured for inbound and outbound
connections.
123/UDP: NTP timing (NTP traffic)
443/TCP: Https over TLS/SSL for provisioning and management traffic
4500/UDP: IPSec NAT Traversal (for all signaling, data, voice traffic)
500/UDP: IPSec Phase 1 prior to NAT detection (after NAT detection,
4500/UDP is used)
4500/UDP: After NAT detection, 4500/UDP is used
Thanks,
Sean
--
If all printers were determined not to print anything
till they were sure it would offend nobody, there would
be very little printed. - Benjamin Franklin
------------------------------------------------------------------------------
uberSVN's rich system and user administration capabilities and model
configuration take the hassle out of deploying and managing Subversion and
the tools developers use with it. Learn more about uberSVN and get a free
download at: http://p.sf.net/sfu/wandisco-dev2dev
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
