On Fri, Nov 26, 2010 at 1:35 PM, Alan Madill <[email protected]> wrote:
> You should not have both tagged and untagged traffic on the same port
That depends on the switch. Some switches will not let you tag with
VLAN 1, so the only way to get there is with untagged traffic. They
also sometimes won't let you access the management interface on any
VLAN other than 1. This is what I have to do for our Dell switches and
I have no problems with martians (using Debian):
auto eth0
iface eth0 inet static
address 10.99.1.1
netmask 255.255.255.0
auto vlan3
iface vlan3 inet static
vlan-raw-device eth0
address 10.99.3.1
netmask 255.255.255.0
------------------------------------------------------------------------------
Increase Visibility of Your 3D Game App & Earn a Chance To Win $500!
Tap into the largest installed PC base & get more eyes on your game by
optimizing for Intel(R) Graphics Technology. Get started today with the
Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs.
http://p.sf.net/sfu/intelisp-dev2dev
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
