I'm playing around with VLAN's and I have a VLAN capable (layer 2) smart switch. I see a steady stream of martians in the logfile if I have the routefilter option set on the loc zone interfaces in /etc/shorewall/interfaces. I have two interfaces in the loc zone, eth1 and vlan2 respectively. vlan2 is an 802.1q trunk going towards the switch.
Is this the expected behavior in this configuration? I just want to make sure Im not missing anything because I've seen some weird stuff happening. Here's my /etc/shorewall/interfaces: #ZONE INTERFACE BROADCAST OPTIONS net eth0 detect tcpflags,nosmurfs,routefilter,logmartians loc eth1 detect dhcp,tcpflags,nosmurfs,logmartians loc vlan2 detect dhcp,tcpflags,nosmurfs,logmartians And /etc/network/interfaces: # eth1 - local lan segment (gigabit) auto eth1 iface eth1 inet static address 10.5.1.1 netmask 255.255.255.0 # VLAN 2 - VoIP network auto vlan2 iface vlan2 inet static address 10.5.10.1 netmask 255.255.255.0 vlan_raw_device eth1 I just want to make sure my approach is right with this configuration... my end goal is to contain my VoIP network in VLAN2. So far it works, but still a few anomalies..... Thanks, Stephen ------------------------------------------------------------------------------ Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! Tap into the largest installed PC base & get more eyes on your game by optimizing for Intel(R) Graphics Technology. Get started today with the Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. http://p.sf.net/sfu/intelisp-dev2dev _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
