On 10/02/16, Maciej Borzecki wrote:
>
> > Dnia 10 luty 2016 o 17:16 Oliver Graute
> > napisał(a):
> >
> >
> > Hello list,
> >
> > if I try to boot from my yocto generated SD-card image my u-boot can't
> > start the kernel because the imx6ul-14x14-evk.dtb is missing.
> >
> >
> > reading boot.scr
On 02/11/2016 07:03 AM, Jon Szymaniak wrote:
I ran into this problem as well, but with parted. My hack was to use
dd to write the correct type ID into the image's MBR after I finished
creating the partitions on the image file.
Thanks Jon Szymaniak,
I was also thinking about a similar solution,
On 2016-02-10 21:08, Khem Raj wrote:
On Feb 10, 2016, at 8:35 AM, Mark Hatle wrote:
On 2/10/16 1:31 AM, Gary Thomas wrote:
I'm trying to debug some code (mplayer) which uses some shared
libraries from ffmpeg. When I use GDB (via gdbserver), I don't
get all the debug information I need - not
On Feb 10, 2016 12:24 PM, "Usman, Fahad" wrote:
>
> Hi,
> Is there a way to create a partition with an arbitrary partition id,
using wic tool. We want to create a disk image using wic for Altera Cyclone
V. It require the partition id to be set to a particular hex value for the
partition it reads t
The code works for me.
Thanks,
Joel
On Wed, Feb 10, 2016 at 2:04 PM, Christopher Larson
wrote:
> def foo(d):
> # Do something
>
> FOO = "${@foo(d)}"
>
> On Wed, Feb 10, 2016 at 12:02 PM Xi Zhou Zhou
> wrote:
>
>> Hi,
>>
>> I want to manipulate a variable with inline python function in a r
> On Feb 10, 2016, at 8:35 AM, Mark Hatle wrote:
>
> On 2/10/16 1:31 AM, Gary Thomas wrote:
>> I'm trying to debug some code (mplayer) which uses some shared
>> libraries from ffmpeg. When I use GDB (via gdbserver), I don't
>> get all the debug information I need - note that many of the shared
On Wed, Feb 10, 2016 at 11:19 AM, Ed Bartosh wrote:
> Hi Oliver,
>
> On Tue, Feb 09, 2016 at 09:29:16AM +0100, Oliver Graute wrote:
>> # It uses SPL and u-boot
>> #
>> # The disk layout used is:
>> # - - - -- - --
>> # | | SPL | u-boot |
def foo(d):
# Do something
FOO = "${@foo(d)}"
On Wed, Feb 10, 2016 at 12:02 PM Xi Zhou Zhou
wrote:
> Hi,
>
> I want to manipulate a variable with inline python function in a recipe.
> The code is something like this.
>
> python newpv() {
> return 999
> }
>
> PV = "${@newpv()}"
>
>
> The
Hi,
I want to manipulate a variable with inline python function in a recipe.
The code is something like this.
python newpv() {
return 999
}
PV = "${@newpv()}"
The error is "name 'newpv' is not defined"
ERROR: ExpansionError during parsing /home/joelz/poky/build/
../meta-test/recipes-bsp/m
> Dnia 10 luty 2016 o 17:16 Oliver Graute napisał(a):
>
>
> Hello list,
>
> if I try to boot from my yocto generated SD-card image my u-boot can't
> start the kernel because the imx6ul-14x14-evk.dtb is missing.
>
>
> reading boot.scr
> ** Unable to read file boot.scr **
> reading zImage
> 5072288
I installed the latest Eclipse (Mars) and attempted to install the
plugin. The installation failed and the reported error was that it could
not locate the TM Terminal version 3.xxx. The TM terminal is installed
but it is version 4.00xxx
Should I rather install older versions of the software or
Hi,
Is there a way to create a partition with an arbitrary partition id,
using wic tool. We want to create a disk image using wic for Altera
Cyclone V. It require the partition id to be set to a particular hex
value for the partition it reads the boot loader binary from. The
partition id does
On 2/10/16 1:31 AM, Gary Thomas wrote:
> I'm trying to debug some code (mplayer) which uses some shared
> libraries from ffmpeg. When I use GDB (via gdbserver), I don't
> get all the debug information I need - note that many of the shared
> libraries do not have any symbolic debugging info:
Is yo
Hello list,
if I try to boot from my yocto generated SD-card image my u-boot can't
start the kernel because the imx6ul-14x14-evk.dtb is missing.
reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-
https://github.com/MentorEmbedded/meta-mentor/blob/master/meta-mel/conf/include/drop-toolchain-from-sdk.inc
may
be of interest to you.
On Wed, Feb 10, 2016 at 9:01 AM Thomas Kaufmann
wrote:
> Hi
>
>
>
> I started porting an existing linux system to the latest yocto base. The
> hardware TI am 335
Hi
I started porting an existing linux system to the latest yocto base. The
hardware TI am 335x based.
I want to use the external linaro toolchains. Since I use an existing 3.2 linux
kernel as well as an older u-boot, I created a own machine and distro
configuration. I succeed to build and run
append initramfs creation to install RPi bootloader trailer
Signed-off-by: Stéphane Cerveau
---
recipes-kernel/linux/linux-raspberrypi.inc | 9 +
1 file changed, 9 insertions(+)
diff --git a/recipes-kernel/linux/linux-raspberrypi.inc
b/recipes-kernel/linux/linux-raspberrypi.inc
index 7
in do_rpiboot_mkimage add rpi bootload trailer
for initramfs image.
Signed-off-by: Stéphane Cerveau
---
recipes-kernel/linux/linux-raspberrypi.inc | 3 +++
1 file changed, 3 insertions(+)
diff --git a/recipes-kernel/linux/linux-raspberrypi.inc
b/recipes-kernel/linux/linux-raspberrypi.inc
index
Hi All,
I am new to Yocto bitbake concept & while building my package running in to
following QA build error.
ERROR: QA Issue: test-repo: Files/directories were installed but not
shipped in any package:
/etc
/etc/test
/etc/test/yamls
/etc/test/yamls/abc1.yaml
/etc/test/yamls/abc2.yaml
Hi,
I want to add fortran support to yocto build. I try different way whitch
describe in the ethernet but enyone does't work. I use fido branch and gcc 4.9.
Can you describe me step by step how to enable fortran in yocto or where I can
find work instruction.
Thanks for help.
Best regards,
St
Hi,
Does anyone who has a BKM on distributed build on Yocto?
>From the docs, IceCream was supported, anyone who can share some information
>on how to enable it would be much appreciated!
Thanks a lot in advance!
BRs,
Ding Yunliang
--
___
yocto mailin
Hi does anyone know if there is a standard DTB for BBB that does not
have USB host, network interface and HDMI?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
--
___
yocto mailing list
yocto@yoct
Hi all,
I'm new to Yocto build environment . I have been following the
documentations to start building my own image with various
customizations. So, my below question may seem very basic to you, for
which I apologize in advance :).
I am working on Intel Galileo Gen2
I cloned the Jethro layer in
On 09.02.2016 14:56, EXT Burton, Ross wrote:
On 9 February 2016 at 13:51, Woronicz, Bartosz ( NSN - PL/Wroclaw)
mailto:bartosz.woron...@nokia.com>> wrote:
Here is the whole bbclass/:
/
DESCRIPTION = "Creates symlink to the latest version workdir
of the package"
Hi Oliver,
On Tue, Feb 09, 2016 at 09:29:16AM +0100, Oliver Graute wrote:
> # It uses SPL and u-boot
> #
> # The disk layout used is:
> # - - - -- - --
> # | | SPL | u-boot | /boot1 | /boot2 | rootfs1 | rootfs2 |data|
> # - --
I hit this issue experimenting with disabling ipv6, as Todd did originally,
with an odd error about not being able to build the native sdk.
It's not a problem for me but is there a recommended way for disabling a libc
distro feature like ipv6 without creating a whole new distro? Does libc really
Hi list,
I am working with CouchDB and I want to integrate it in Yocto.
The main issue is that it requires an old version of spidermonkey
(1.8.5) and this version generate an illegal instruction on my runtime
(an ARM borad based on Freescale imx6). I am trying to patch
spidermonkey using a
27 matches
Mail list logo
