properly. That said, I'm not using the minios network
functionality much, since all of my customer and test domains use PVHVM
drivers.
-John
___
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
le context-sensitive macro in the
code.
Sincerely,
John
Example
- - - -
As an example, here is a diff that shows how the
context-sensitive macro “fail-if” could be replaced by an inline
function "fail". The diff is not a patch, just shows a suggested
design pattern.
Taken by itself as a
Hi,
Is it possible to give each channels of uart to different guests via pass
through mechanism?
regards
Georgeeldhojohn
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
Thanks for the reply. we are using renesas rcar h3 board. Does it supports?
On Tuesday, May 23, 2017, Jan Beulich wrote:
> >>> On 23.05.17 at 11:38, >
> wrote:
> > Is it possible to give each channels of uart to different guests via pass
> > through mechanism?
>
> If each channel is represented
Hi,
I was trying to study the working of xen. From what I understood, dom0
issues a hypercall to create domU. but I couldn't understand where the dtb
for domU comes from?. I found the flow from hypercall to domain_create
function.
please help me...
___
Xe
all megasas devices are legacy PCI devices, so the interface
>> names are added to the subclasses registered by
>> megasas_register_types(), according to information in the
>> megasas_devices[] array.
>>
>> "megasas-gen2" already implements INTERFACE_PCIE_
ry below and above 4GB.
>>
> Yes, it should. I suppose a bug somewhere in Renesas eth driver.
> Meanwhile George John could make some investigations.
>
> Otherwise the problem would be exactly the same on baremetal as the board
>> support seems to have bank above 4GB...
tables optional"
Could we also refer to the third patch in the XSA resolution section
please?
Thank you,
--
John Thomson
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
>
> Dear Andrii Anisov,
Thank you for the reply.
We are using R-Car H3 salvator X.
> It really depends on the setup you need.
Our plan is to run Linux as Dom0 and Android as DomU. The Linux portion
will be having 1 HDMI display and the Android porion will be having 1 HDMI.
Can we share the DU a
Hi all,
I want to bring up Android over Xen as Dom0 on Rcar-H3 salvator x board.
Can anybody please share the procedure to do so.?.
Regards,
George
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
Hi,
I am running Xen on Rcar H3 which is now configured Dom0 memory as 752M
and need to change it as 2048M.I attempted to change it by
xl mem-set (xl mem-set 0 2048M) where 0 is Dom0 ID.It result following
error
root@salvator-x-xen-dom0:~# xl list
NameID
Hi all,
Thank you for the reply.
I checked with xen version 4.9, Still the error for the filesystem
persists. What seems to be the problem?. I am attaching the log for the
above error and also the dts file I am using.
Regards,
George
NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.9
: here
case 'u': /* Unsigned decimal. */
^~~~
cc1: all warnings being treated as errors
Signed-off-by: John Thomson
---
common/libc/vsnprintf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/libc/vsnprintf.c b/common/libc/vsnprintf.c
ind
functions static
https://lists.xenproject.org/archives/html/xen-devel/2017-06/msg02896.html
Where the static keyword is added to the inline functions in vtpmmgr
--
John Thomson
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
hi,
I am a newbie. Please correct if I am wrong?. I have a r-car H3 board with
Dom0 and two DomU's. Do we have to passthrough one of the hdmi ports to the
one guest if we could implement GPU sharing between Dom0 and one DomU in
r-car h3 board.?
___
Xen-de
Thanks for the explanation!
It looks like the code that caused the issue would be removed with this
patch?
staging: atomisp: use clock framework for camera clocks
https://lkml.org/lkml/2017/9/20/712
--
John Thomson
___
Xen-devel mailing list
Xen
Hi,
I was trying out xen in salvator-X(M3 Board as described in
https://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extensions/Salvator-X
I ran in to following error:
U-Boot 2015.04 (Feb 21 2017 - 14:24:48)
CPU: Renesas Electronics R8A7796 rev 1.0
Board: Salvator-X
I2C: ready
DRAM:
>
> memory@4800 {
> device_type = "memory";
> /* first 128MB is reserved for secure area. */
> reg = <0x0 0x4800 0x0 0x3800>,
> <0x5 0x 0x0 0x4000>,
> <0x6 0x 0x0 0x4000>,
> <0x7 0x 0x0
l try to update with the logs
Thanks and regards,
George
On Mon, Feb 27, 2017 at 4:25 PM, Oleksandr Andrushchenko wrote:
> Hi,
>
> PFA the DTS I use for M3ULCB board
>
>
>
> On 02/27/2017 12:48 PM, Oleksandr Tyshchenko wrote:
>
>> Hi.
>>
>> On M
wrote:
>
>
> On 07/11/2016 16:39, George John wrote:
>
>> Hi,
>>
>
> Hello,
>
> (XEN) Freed 276kB init memory.
>> (XEN) traps.c:2505:d0v0 HSR=0x93820007 pc=0xc001d084 gva=0xe7804060
>> gpa=0x00e6160060
>>
>
> Looking at th
On 14/11/16 14:05, Jason Long wrote:
> Thank you but the problem is that "virt-manager" is for Redhat and Redhat
> don't like Xen anymore because of KVM. Another problem is that a program like
> VirtualBox has a nice GUI but virt-manager not.
virt-manager is also available for Fedora and Fedora
nose off to spite your face.
jch
>
>
>
> On Tuesday, November 15, 2016 2:16 PM, John Haxby
> wrote:
> On 14/11/16 14:05, Jason Long wrote:
>> Thank you but the problem is that "virt-manager" is for Redhat and Redhat
>> don't like Xen anymore be
Hi,
I just bumped in to some errors related to filesystem . The following is
the log. I am using xen 4.7.1 along with linux kernel 3.19.8 as Dom0
Starting kernel ...
- UART enabled -
- CPU booting -
- Xen starting in Hyp mode -
- Zero BSS -
- Setting up control registers -
- Turning on p
d nodes:
> - hypervisor
> - psci
>
> I'm not sure, that Linux & Xen will correctly inter-works without them.
>
> With the best regards,
> Iurii Mykhalskyi
>
>
>
> On Wed, Nov 16, 2016 at 7:23 PM, George John
> wrote:
>
>> Hi,
>> I just bumped in
Hi,
On Sat, Nov 19, 2016 at 3:06 AM, Julien Grall wrote:
>
>
> On 16/11/2016 11:23, George John wrote:
>
>> Hi,
>>
>
> Hello George,
>
> I just bumped in to some errors related to filesystem . The following is
>> the log. I am using xen 4.
me it was the problem
when the serial getty service tries to use the scif0 port the xen was using.
Can any one suggest me a solution.?. I am attaching the log
Thanks and regards,
George
On Mon, Nov 21, 2016 at 4:45 PM, Andrii Anisov
wrote:
> John,
>
> I guess you should remove descript
Hi,
I am a newbie working on xen. I have brought up Dom0 in lager board. I want
to bring up Dom U in lager. I would like to know whether there are any
prebuilt binaries for xen dom0 modules for arm cortex a15 .
regards,
George
___
Xen-devel mailing list
X
Hi all,
I am a newbie in xen. I wish to know which all intel platforms support xen
hypervisor?.
Thanks and Regards,
George
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
Hi all,
I was able to bring up Dom0 in lager board by steps followed by charles.
What could be the steps I could follow to bring up DomU in xen for lager
board.?..How to bring xen-utils in the filesystem(yocto build) of Dom0
linux for configuring DomU.
Regards,
George
.org/gitweb/?p=xen.git;a=blob;f=docs/misc/hvm-emulated-unplug.markdown
>
> Signed-off-by: Paul Durrant
> Reviewed-by: Stefano Stabellini
>
> Cc: Anthony Perard
> Cc: Paolo Bonzini
> Cc: Richard Henderson
> Cc: Eduardo Habkost
> Cc: "Michael S. Tsirkin&qu
andr Andrushchenko <
> andr2...@gmail.com> wrote:
>
>> On 01/26/2017 09:11 PM, Julien Grall wrote:
>>
>>>
>>>
>>> On 24/01/2017 13:05, George John wrote:
>>>
>>>> Hi all,
>>>>
>>>
>>> Hello,
wrote:
> On Fri, Dec 09, 2016 at 06:40:07PM +0530, George John wrote:
> > Hi all,
> >
> > I am a newbie in xen. I wish to know which all intel platforms support
> xen
> > hypervisor?.
>
> All the ones that can do 64-bit mode.
>
___
no, I meant some embedded platform like say for example minnowboard. Any
other boards like minnowboard?
thanks and regards,
George
On Mon, Dec 12, 2016 at 8:11 PM, Konrad Rzeszutek Wilk <
konrad.w...@oracle.com> wrote:
> On Mon, Dec 12, 2016 at 12:56:32PM +0530, George John wrot
ok thank you very much
On Tuesday, December 13, 2016, Konrad Rzeszutek Wilk
wrote:
> On Tue, Dec 13, 2016 at 10:58:53AM +0530, George John wrote:
> > no, I meant some embedded platform like say for example minnowboard. Any
> > other boards like minnowboard?
>
> Based n
&g
hi,
Can anybody give a list of intel based boards for automotive embedded use
case in which xen could be installed?.
regards,
George
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
On 23/10/16 21:48, Pasi Kärkkäinen wrote:
> Has anyone thought of writing Xen RNG (PV) driver?
>
> Afaik currently there's no access to hardware accelerated RNGs from Xen VMs,
> so for example SSL/TLS operations can result in low entropy and blocking
> /dev/random in Xen VMs, resulting in poor
Hi, I am trying to bring up Dom0 and DomU in xen in lager board. I have
followed the instructions in
https://wiki.xen.org/wiki/Xen_ARM_with_Virtualization_Extensions/Lager . I
am unable to boot Dom0. I am getting the following log.
--
| LAGE
I would like to request that there be a way in the xen console
to send the escape char. The problem I faced was that I did:
xl console
domU> telnet
...
At some point, I realised that I wanted to send Ctrl-], which is
the standard telnet escape char to the telnet command. But, of
course,
On Nov 6, 10:37am, Wei Liu wrote:
} On Fri, Nov 06, 2015 at 02:31:22AM -0800, John Nemeth wrote:
} > I would like to request that there be a way in the xen console
} > to send the escape char. The problem I faced was that I did:
} >
} > xl console
} > domU> telnet
}
o a static inline, unless we start
> exporting tk_core.
So the timekeeper is passed to the notifier. So you probably want something like
struct timespec64 __current_kernel_time64(struct timekeeper *tk)
{
return timespec64_to_timespec(tk_xtime(tk));
}
Then you can cast the priv pointer in the notifier to a timekeeper and
use it that way?
thanks
-john
___
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
On Tue, Nov 10, 2015 at 7:31 AM, Thomas Gleixner wrote:
> On Tue, 10 Nov 2015, John Stultz wrote:
>> On Tue, Nov 10, 2015 at 7:10 AM, Stefano Stabellini
>> wrote:
>> > On Tue, 10 Nov 2015, Arnd Bergmann wrote:
>> >> On Tuesday 10 November 20
Hi,
Recently I encounter a strange performance problem with APIC virtualization.
My host has Intel(R) Xeon(R) CPU E7-4890 v2 CPU installed which support
APIC virtualization and x2apic, and there are 4 socket * 15
cores_per_socket = 60 core available for VM. There is also a SSD disk on
host an
/11 15:35, Zhang, Yang Z wrote:
Liuqiming (John) wrote on 2015-06-11:
> Hi,
>
> Recently I encounter a strange performance problem with APIC virtualization.
>
> My host has Intel(R) Xeon(R) CPU E7-4890 v2 CPU installed which support
> APIC virtualization and x2apic, and there are 4 so
1004844372.651264
0x30 EXIT_REASON_EPT_VIOLATION 10
249172 24917.2
Total874839
4541683960
On 2015/6/11 16:34, Zhang, Yang Z wrote:
Liuqiming (John) wrote on 2015
code. Everything works fine if I just clone from
Xenbits, .\configure, etc, without checking out RELEASE-4.6.1.
Sincerely,
John
- - - - - - -
LINK i386-dm/qemu-dm
../libqemu_common.a(vnc.o): In function `vnc_start_tls':
/home/mc/qqdebug/xen/tools/qemu-xen-traditional-dir/vnc.c
> On May 31, 2016, at 4:22 PM, Mark Pryor wrote:
>
> John M. said:
>
> <http://xenbits.xen.org/gitweb/?p=qemu-xen-traditional.git;a=summary>
>
> On Ubuntu 16.04, when I clone from Xenbits and then checkout
> RELEASE-4.6.1,
> ‘make world’ breaks
> when i
On 05/13/2015 02:15 PM, Stefano Stabellini wrote:
> On Wed, 13 May 2015, Daniel P. Berrange wrote:
>> On Wed, May 13, 2015 at 06:29:46PM +0100, Stefano Stabellini wrote:
>>> Do not emulate a floppy drive if no drives are supposed to be present.
>>>
>>> This fixes the behavior of -nodefaults, that
On 05/14/2015 10:07 AM, Michael S. Tsirkin wrote:
> On Thu, May 14, 2015 at 02:02:04PM +0200, Markus Armbruster wrote:
>> Correct.
>>
>> Here's how I think it should be done:
>>
>> * Create a machine option to control the FDC
>>
>> This is a machine-specific option. It should only exist for ma
Hi Konrad,
Will this design include hotpatch build tools chain?
Such as how these .xplice_ section are created? How to handle xen symbols when
creating hotpatch elf file?
On 2015/5/16 3:44, Konrad Rzeszutek Wilk wrote:
Hey!
During the Xen Hacka^H^H^H^HProject Summit? we chatted about live-pat
I'm trying to package Xen 4.6 (specifically Xen 4.6.3) for
use with NetBSD. I have it mostly done; however, when I try to
create a domU, libxl goes into an infinite loop calling the scripts.
If I try to create a domU with no network or disk, it works fine
(albeit of rather limited use). Have
On Jul 2, 12:40pm, Wei Liu wrote:
} On Tue, Jun 28, 2016 at 06:00:49PM -0700, John Nemeth wrote:
} > I'm trying to package Xen 4.6 (specifically Xen 4.6.3) for
} > use with NetBSD. I have it mostly done; however, when I try to
} > create a domU, libxl goes into an infinite lo
, I usually do (*checks header*; yep, good this time).
} > On Mon, Jul 04, 2016 at 01:11:04AM -0700, John Nemeth wrote:
} > > On Jul 2, 12:35pm, Wei Liu wrote:
} > > }
} > > } This basically replicates the same logic in libxl_linux.c. Without this
} > > } libxl will loop
signed long long tmp;
> +int ret = -1;
> +
> +if (VIR_STRDUP(trate, rate) < 0)
> +return -1;
> +
> +p = strchr(trate, '@');
> +if (p != NULL)
> +*p = 0;
> +
> +regcomp(&rec, vif_bytes_per_sec_re, REG_EXTENDED|R
On 2015/9/23 21:41, Zhang, Yang Z wrote:
Hanweidong (Randy) wrote on 2015-09-23:
Zhang, Yang Z wrote on ent: 2015年9月23日 11:51:
VCPU_KICK_SOFTIRQ when post interrupt to vm.
Zhang, Yang Z wrote on 2015-09-08:
Liuqiming (John) wrote on 2015-09-08:
Ok, I will try to explain, correct me if I
On 2015/9/24 11:25, Zhang, Yang Z wrote:
Liuqiming (John) wrote on 2015-09-24:
On 2015/9/23 21:41, Zhang, Yang Z wrote:
Hanweidong (Randy) wrote on 2015-09-23:
Zhang, Yang Z wrote on ent: 2015年9月23日 11:51:
VCPU_KICK_SOFTIRQ when post interrupt to vm.
Zhang, Yang Z wrote on 2015-09-08
e code and find saved_errno is no
> longer used - remove it.
>
> src/libxl/libxl_migration.c | 7 +--
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
ACK
John
Also noteworthy that virNetSocketNewConnectTCP could overwrite errno
when freeaddrinfo is run in error
I believe this also has something to do with a windows guest boot hang
issue.
It randomly occured, when boot a guest has windows 2008 os and pv-driver
installed.
The boot process hangs when wait xenstored replay event signal.
It can be reproduced after hundreds reboot using the xen staging br
Ok, I will try to explain, correct me if I got anything wrong:
The problem here is not interrupts lost but interrupts not delivered in
time.
there are basically two path to inject an interrupt into VM (or vCPU to
another vCPU):
Path 1, the traditional way:
1) set bit in vlapic IRR fi
a' (7/25/08 - quite a while ago)!
I'll work on getting this pushed shortly -
John
>
> Signed-off-by: Wei Liu
> ---
> src/xenconfig/xen_common.c |2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/src/xenconfig/xen_common.c b/src/xenco
t...
Simple enough solution, but they will show up in someone's git status
output since they are also removed from .gitignore.
There are a couple Coverity issues from the next 3 patches - I'll note
them for those directly.
ACK
John
> diff --git a/.gitignore b/.gitignore
> index e
On 01/10/2015 12:03 AM, Jim Fehlig wrote:
> Introduce a parser/formatter for the xl config format. Since the
> deprecation of xm/xend, the VM config file format has diverged as
> new features are added to libxl. This patch adds support for parsing
> and formating the xl config format. It suppo
> create mode 100644 tests/xlconfigdata/test-new-disk.cfg
> create mode 100644 tests/xlconfigdata/test-new-disk.xml
> create mode 100644 tests/xlconfigdata/test-spice.cfg
> create mode 100644 tests/xlconfigdata/test-spice.xml
> create mode 100644 tests/xlconfigtest.c
>
My Cove
On 2015/10/10 14:32, Zhang, Yang Z wrote:
Zhang, Yang Z wrote on 2015-09-24:
Liuqiming (John) wrote on 2015-09-24:
On 2015/9/24 11:25, Zhang, Yang Z wrote:
it completed, the following vmentry will pick up the pending interrupt.
If you send the ipi unconditionally, actually it is received by
On 10/13/2015 11:55 AM, Fabio Fantoni wrote:
> I added ahci disk support in libxl and using it for week seems that was
> ok, after a reply of Stefano Stabellini seems that xen disk unplug
> support only ide disks:
> http://git.qemu.org/?p=qemu.git;a=commitdiff;h=679f4f8b178e7c66fbc2f39c905374ee86
On 10/13/2015 01:10 PM, Stefano Stabellini wrote:
> On Tue, 13 Oct 2015, John Snow wrote:
>> On 10/13/2015 11:55 AM, Fabio Fantoni wrote:
>>> I added ahci disk support in libxl and using it for week seems that was
>>> ok, after a reply of Stefano Stabellini seems that
On 19/10/2015 09:56, Ingo Molnar wrote:
>
> Please Cc: the Xen maintainers as this appears to be Xen specific. Also,
> please
> Cc: linux-ker...@vger.kernel.org.
>
> Thanks,
>
> Ingo
>
> * John Doe wrote:
>
>> Hello,
>> I get a kernel
On 10/19/2015 07:44 AM, Stefano Stabellini wrote:
> On Mon, 19 Oct 2015, Gerd Hoffmann wrote:
>> Hi,
>>
I'm trying to follow this discussion as best as I am able, but my lack
of experience with Xen prevents me from really participating in a
meaningful way.
(I see that L
On 20/10/2015 11:51, Jan Beulich wrote:
>>>> On 19.10.15 at 18:25, wrote:
>> On 10/19/2015 06:16 AM, John Doe wrote:
>>>>> [0.00] general protection fault: [#1] SMP
>>>>> [0.00] Modules linked in:
>>>>> [
ure to PV(H) guests.
>
> Oh, so something like
>
> cpuid=['0x7:ebx=x0xx']
>
> (bit 14 as zero) for John to try then.
>
>
> -boris
>
>> Sadly the story is different for HVM
>> guests (where the leaf handling uses black listing),
ank 4: ba0011000402[ 0]
(XEN) mce.c:1536: End dump mc_info, 8 mcinfo dumped
(XEN)
(XEN)
(XEN) Panic on CPU 0:
(XEN) HARDWARE ERROR
(XEN)
(XEN)
(XEN) Reboot in five seconds...
Any help?
Thanks,
John.
Lo
On 26/10/2015 13:04, John Doe wrote:
> Hi, i'm getting this problem with linux 4.3.0-rcX branch.
> Full log is attached. My hardware is based on intel skylake i7-6700k on
> z170 chipset and it is working properly. It does boot correctly with
> older kernels (3.12).
> With mce=o
) i always see those messages but
i'm able to boot without the acpi error.
My machine runs on skylake cpu with z170 chipset and the latest bios.
Any ideas on how to fix this?
Thanks,
John.
Loading Xen 4.4.3 ...
Loading Linux 4.3-0.pvops.qubes.x86_64 ...
Xen 4.4.3-7.fc20
(XEN) Xen version
On 04/11/2015 17:13, Jan Beulich wrote:
On 04.11.15 at 16:15, wrote:
>> Hi,
>> i just build the latest 4.3.0 kernel and ran it on qubes-os with xen
>> 4.4.3. I get this error just before the reboot:
>>
>> [(XEN) APIC error on CPU0: 40(00)
>
> And this appeared with the switch to kernel 4.3?
Hi all,
Recently I met an odd performance problem: when I turn on APIC
Virtualization feature (apicv=1), the network performance of a windows
guest become worse.
My test case like this: host only have one windows 2008 R2 HVM
guest running,and this guest has a SR-IOV VF network passth
Hi Jan,
Thanks for the reply.
On 2015/2/2 18:12, Jan Beulich wrote:
>>> On 31.01.15 at 11:29, wrote:
> Recently I met an odd performance problem: when I turn on APIC
> Virtualization feature (apicv=1), the network performance of a windows
> guest become worse.
>
> My test case like
On 2015/2/5 10:57, Liuqiming (John) wrote:
sorry for late replay
On 2015/2/3 23:32, Konrad Rzeszutek Wilk wrote:
> On Tue, Feb 03, 2015 at 10:24:08AM +0800, Liuqiming (John) wrote:
> > On 2015/2/2 22:59, Konrad Rzeszutek Wilk wrote:
> >> On Mon, Feb 02, 2015 at 09:58:57PM +080
On 2015/2/6 3:26, Konrad Rzeszutek Wilk wrote:
On Thu, Feb 05, 2015 at 11:04:37AM +0800, Liuqiming (John) wrote:
> On 2015/2/5 10:57, Liuqiming (John) wrote:
>> sorry for late replay
>>
>> On 2015/2/3 23:32, Konrad Rzeszutek Wilk wrote:
>>> On Tue, Feb 03, 2015
On 10/11/14 18:01, Ian Jackson wrote:
> * Domain name(s) which you use to provide Xen software/services.
This makes sense for a services provider but I'm not sure what it means
for a distro. Is this intended to mean a download location for an
installation image and updates?If it's a down
I needed xen-detect this morning so as usual I pulled it from git and it
didn't work and it threw a compilation warning. Thinking the problem
was the strict-aliasing warning (patch 1) I fixed that and ... it still
didn't work. Well, that's not entirely true, it was just
over-enthusiastically cla
At some stage, the cpuid instruction used to detect a xen hvm domain
also started working in a pv domain so pv domains were being identified
as hvm (dom0 excepted). Change the order so that pv is tested for
first.
Signed-off-by: John Haxby
---
tools/misc/xen-detect.c | 12 ++--
1 file
t32_t *)(signature + 0) = regs[1];
^
Signed-off-by: John Haxby
---
tools/misc/xen-detect.c | 21 ++---
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/tools/misc/xen-detect.c b/tools/misc/xen-detect.c
index 787b5da..19c66d1 100644
--- a/tools/misc/xen-detect.c
> On 1 Dec 2014, at 17:15, Andrew Cooper wrote:
>
> On 01/12/14 14:37, John Haxby wrote:
>> With gcc 4.8.3, compiling xen-detect gives a compilation warning if
>> you're optimising:
>>
>> $ cc -Wall -Os xen-detect.c
>> xen-detect.c: In function ‘c
On 01/12/14 17:15, Andrew Cooper wrote:
> On 01/12/14 14:37, John Haxby wrote:
>> With gcc 4.8.3, compiling xen-detect gives a compilation warning if
>> you're optimising:
>>
>> $ cc -Wall -Os xen-detect.c
>> xen-detect.c: In function ‘check_for_xen’:
>&g
ation requested in my pastebin or
provide as directed. I would have opened a bug, but
https://wiki.xenproject.org/wiki/Reporting_Bugs_against_Xen_Project
suggests sending to this list first.
John Poole
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
t from the output of "objcopy --help" is located at:
http://napadata.net/paste/view/6ebf2472
Thank you,
John
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
x27;d
have to study their logic first to be certain. What binutils version
are you using, and what's the target list e.g. objcopy lists at the
end of its --help output?
Jan
I updated my binutils to 2.27 and I successfully completed "make". Thank
you.
John
I am at a loss to understand why I was able to build one time, but
not now.
The log files of the sessions are as follows:
Outside Gentoo Portage:
"make world":
http://napadata.net/paste/view/eb7c1d97
"make" 2nd:
http://napadata.
try any other keyhandler, Xen crashes.
I asked a colleague to try this on a second HiKey 960, using a different
cross-compile host, and she gets exactly the same result.
Sincerely,
John
………..
Booting `Xen'
Loading driver at 0x000B87F3000 EntryPoint=0x000B88990C8
Loading driv
or if they are even
needed for Xen on the HiKey 960?
Sincerely,
John
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
(XEN)
(XEN)
(XEN) Reboot in five seconds...
I would be pleased to supply any further information that might help.
Sincerely,
John
___
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
> On Sep 29, 2017, at 11:25 AM, Roger Pau Monné wrote:
>
> On Fri, Sep 29, 2017 at 02:57:11PM +0000, John P. McDermott (USN Civilian)
> wrote:
>> (XEN) Xen BUG at page_alloc.c:738
>
> Do you have XSA-245 applied?
>
> http://xenbits.xen.org/xsa/advisory-245.
> On Sep 29, 2017, at 11:31 AM, John P. McDermott (USN Civilian)
> wrote:
>
>
>> On Sep 29, 2017, at 11:25 AM, Roger Pau Monné wrote:
>>
>> On Fri, Sep 29, 2017 at 02:57:11PM +, John P. McDermott (USN Civilian)
>> wrote:
>>> (XEN) Xen BUG a
> On Sep 29, 2017, at 11:57 AM, John P. McDermott (USN Civilian)
> wrote:
>
>
>> On Sep 29, 2017, at 11:31 AM, John P. McDermott (USN Civilian)
>> wrote:
>>
>>
>>> On Sep 29, 2017, at 11:25 AM, Roger Pau Monné wrote:
>>>
>>&
93 matches
Mail list logo
