I recently stood up a Raspberry Pi 4 running weewx 4.2.0 with the IP-100
v0.5 extension. It appears the IP-100 Console data does not match the data
presented via weewx (using the out-of-box index.html, which is using the
SeasonsSkin) -- particularly, the Rain and Rain Rate. I've shared scree
restarted weewx today (or if it restarted on its own today). That would be
> a way to lose rainfall.
>
>
> On Jan 4, 2021, at 6:33 PM, tim lambert wrote:
>
>
>
> I recently stood up a Raspberry Pi 4 running weewx 4.2.0 with the IP-100
> v0.5 extension. It appears the IP
ning, uninterrupted, since
> midnight.
>
> On Jan 4, 2021, at 7:27 PM, tim lambert wrote:
>
>
>
> Thanks for the quick response John!
>
> I am running your version of the IP100 for weewx 4 - version 0.5
>
> I did restart the weewx today -- had some network i
eset), the driver just saves the last value and
> reports 0.0 for rain.
>
> On Jan 4, 2021, at 7:40 PM, tim lambert wrote:
>
>
> Thanks for the guidance John! I was anticipating to simply have a day
> with a clean run, starting at midnight. I should have this info tomorrow
ll master.zip
>
>
>
> On Jan 6, 2021, at 8:54 AM, tim lambert wrote:
>
>
>
> Hi John,
>
> After leaving the server run uninterrupted, all of the data being
> displayed on weewx is ticking to the ip-100 console.
>
> Apologies for my ignorance, where can I
Using the directions outlined in the readme with 0.5 version
On Wednesday, January 6, 2021 at 12:28:29 PM UTC-8 jo...@johnkline.com
wrote:
> How did you install the 0.5 version?
>
> On Jan 6, 2021, at 11:57 AM, tim lambert wrote:
>
>
>
> Thanks John!
>
> Unfortun
ll the 0.5 version, and tell me how that goes and
> the exact command line you used to install 0.5. Then, we can go from there.
>
> On Jan 6, 2021, at 12:33 PM, tim lambert wrote:
>
>
>
> Using the directions outlined in the readme with 0.5 version
>
>
> On We
pieced together how you got that error message. You were asking
> the python interpreter to execute a shell script.
>
> jkline@judy:~/software/weewx $ python util/scripts/wee_extension
> File "util/scripts/wee_extension", line 6
> WEEWX_BINDIR=/home/weewx/bin
>
Gang,
Currently running weewx 4.2 (will be upgrading in the next few days to 4.4)
on a Raspberry Pi 4 (32-bit OS) with a Rainwise MK-III and IP-100 providing
station data -- everything has been working properly for several weeks and
is populating a remote MySQL DB.
Once I upgrade weewx, I'd li
w the gauges to
update on every loop packet rather than on each report cycle (how often they
will update will depend on how often your station emits loop packets, for your
Rainwise this should be up to every couple of seconds).
Gary
On Sunday, 31 January 2021 at 13:15:24 UTC+10 tim lambert wrote:
a hosted server
(public accessible) for viewing?
Thanks in Advance!
-- Tim
On Saturday, January 30, 2021 at 8:35:31 PM UTC-8 tim lambert wrote:
> Thanks Gary for the insight and guidance.
>
>
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986>
ant.
Thanks in Advance for your guidance!
-- Tim
On Saturday, January 30, 2021 at 8:35:31 PM UTC-8 tim lambert wrote:
> Thanks Gary for the insight and guidance.
>
>
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
&
(5
minutes may not even do it), or pare down the number of reports, or simplify
the reports, or get a more capable server.
-tk
On Fri, Feb 5, 2021 at 10:11 AM Tim Lambert wrote:
Tom,
Attached is the logfile for 2 cycles.
Per Line 45 @ 08:56:54 – The 120sec Interval for wwewx.engine is
sonsReport in 0.80 seconds
Feb 5 11:40:18 pi4p1 weewx[1839] INFO weewx.imagegenerator: Generated 15
images for report SeasonsReport in 0.51 seconds
On Friday, February 5, 2021 at 11:29:56 AM UTC-8 tim lambert wrote:
Tom,
Is the issue CPU or RAM?
I’m running a Pi 4 with 4gb of RAM.
Regards,
Tim
Se
27;
Feb 5 11:40:17 pi4p1 weewx[1839] INFO weewx.cheetahgenerator: Generated 8
files for report SeasonsReport in 0.80 seconds
Feb 5 11:40:18 pi4p1 weewx[1839] INFO weewx.imagegenerator: Generated 15
images for report SeasonsReport in 0.51 seconds
On Friday, February 5, 2021 at 11:29:56 AM UTC-8
Thanks Team!
I have another Pi4 w/4GB of RAM sitting idle – I’m going to install weewx on
it, and uninstall on the other box.
This will isolate weewx to run by itself (with exception of Pure FTPd and
Apache Server)
Regards,
Tim
From: Tim Lambert
Sent: Friday, February 5, 2021 1:34 PM
7;s just a few
options in your configuration file to give it a go.
-tk
On Fri, Feb 5, 2021 at 1:34 PM Tim Lambert wrote:
Tom,
MySQL is on a remote/hosted server – it is not running on the Pi. I’ve
provided the connection parameters in the weewx.conf
Regards,
Tim
From: Tom K
1.7 us, 0.0 sy, 0.0 ni, 98.3 id, 0.0 wa, 0.0 hi, 0.0 si,
> 0.0 st
> %Cpu3 : 0.3 us, 1.0 sy, 0.0 ni, 98.6 id, 0.0 wa, 0.0 hi, 0.0 si,
> 0.0 st
> MiB Mem :926.1 total, 30.5 free,349.4 used,546.2 buff/cache
> MiB Swap:100.0 total, 98.5 free,
Gary/All,
I'm looking to install the Real Time Extension, however the installation
instructions reference a 0.5.0 release, which does not appear to be
available on GitHub.
When I attempt to install the 0.4.2 release, I receive the following:
*sudo ./wee_extension
--install=/h
d server
was extremely intensive and thus slowing down the reporting process (which
Gary and Tom both thought was the root cause).
Thanks for helping me sleuth this one -- hopefully others will benefit from
the errors in my architecture.
-- Tim
On Friday, February 5, 2021 at 10:57:47 PM UTC-8 tim
Hi Stephen,
I started out with weeWX in late December using SQLite, then transitioned
to MySQL on a remotely hosted server -- simply backed-up the weewx.conf and
made the necessary changes to point to MySQL. Data migration from SQLite
to MySQL was seamless.
However, I began to notice signific
Hi,
Two questions on this topic:
1. Which config parameter(s) did you use to set the aeris url for the
Belchertown skin? In my case:
https://api.aerisapi.com/airquality/45.349518,-122.823247?&format=json&client_id=RPt5vXyj9IavCW5i7hvwY&client_secret=BQEa1WWhdpGBk9jRNwTO9jKy0yp0WTkVJTicZOpp
under
> https://github.com/poblabs/weewx-belchertown#forecast-options
>
>
> On Thursday, February 11, 2021 at 3:47:50 PM UTC-8 tim lambert wrote:
>
>> Hi,
>>
>> Two questions on this topic:
>>
>> 1. Which config parameter(s) did you use to
ot valid...
>
> {"success":false,"error":{"code":"invalid_client","description":"The client
> provided is invalid."},"response":[]}
>
>
> Le ven. 12 févr. 2021 à 02:02, tim lambert a
> écrit :
>
>> Vince,
qi_category =
> data["aqi"][0]["response"][0]["periods"][0]["category"]
> aqi_dominant =
> data['aqi'][0]['response'][0]['periods'][0]['dominant']
> aqi_time =
> data[&qu
Ed,
Your archive_interval (in StdArchive section) is set to 300 seconds (5
minutes) -- meaning that data will be inserted into the DB every 5
minutes.
The log file simply shows that your weather station is being polled for
data regularly for data. You simply need to allow 5-10 minutes to p
:
7130.000, "mic" : "CRC"}\n']
Feb 12 16:01:11 DEBUG user.sdr: lines=['{"time" : "2021-02-12 22:01:08",
"model" : "Fineoffset-WH65B", "id" : 97, "battery_ok" : 1, "temperature_C" :
1.500, &
: belchertown skin
you can compare your files with mines in my github repository
https://github.com/ddperso/weewx-belchertown
in aqi_url, you have a strange string "%20-", if you run this url in a
navigator, do you have valid information?
Le ven. 12 févr. 2021 à 19:31, tim lambert a écri
weeWX v4.4.0 (installed using setup.py method)
Raspberry Pi 4 (32-bit OS)
I recently installed wee-wd (https://github.com/weewx/weewx/wiki/weewx-wd)
without issue.
When I stand up the Saratoga Template
(http://www.tslllc.com/korsherw28/weewx/mainconsole/wxindex.php) the date
stamp on the heade
WeeWX-WD v2.1.3. To upgrade just download the
v2.1.3 extension package from GitHub, install v2.1.3 with wee_extension and
restart WeeWX. After the first report cycle things should come good. If not
please let me know.
Gary
On Monday, 15 February 2021 at 06:55:34 UTC+10 tim lambert wrote:
weeWX
Gary,
I un-installed the original install of WeeWX-WD v1.0.3 and installed WeeWX-WD
v2.1.3 – the date issue has been resolved and is presenting properly on the
Saratoga template.
Thanks again!
Regards,
Tim
From: Tim Lambert
Sent: Sunday, February 14, 2021 8:51 PM
To: weewx-user
31 matches
Mail list logo
