Gary, I upgrade weewx form 4.2 to 4.4 earlier this week -- everything appears to be stable.
I've downloaded and installed WeeWx SteelSeries Gauges Extension, following the manual installation directions since i did the install of weewx manually (setup.py method). Now to show my ignorance... 1. How do I access the SS Gauges for presentation/display on the Pi? 2. How can I get the SS Gauges for presentation/display on a hosted server -- noting my approach is to use weewx as my 'weather engine' on a local Pi (not accessible outside my local network), parsing data to a hosted server (public accessible) for viewing? Thanks in Advance! -- Tim On Saturday, January 30, 2021 at 8:35:31 PM UTC-8 tim lambert wrote: > Thanks Gary for the insight and guidance. > > > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > > > *From: *gjr80 > *Sent: *Saturday, January 30, 2021 7:58 PM > *To: *weewx-user > *Subject: *[weewx-user] Re: WEEWX-WD and Weewx 4.2 to 4.4 > > > > Hi, > > > > I wouldn't be using WeeWX-WD from bitbucket, it has not been touched for > some years now. WeeWX-WD on github > <https://github.com/gjr80/weewx-weewx-wd> is more up to date, the current > version is v2.1.2 from November 2020. It should have no problems running on > WeeWX v4.x under python 2 or python3. The SteelSeries Weather Gauges > <https://github.com/mcrossley/SteelSeries-Weather-Gauges> have directly > supported WeeWX of v2.5.0 (of the SteelSeries Weather Gauges) or for about > six years, and there is now a WeeWX SteelSeries Gauges extension > <https://github.com/weewx/weewx/wiki/steelseries> that installs the > necessary skin to support the SteelSeries Weather Gauges (this is the > preferred means of providing the SteelSeries Weather Gauges, WeeWX-WD did > support the SteelSeries Weather Gauges via the WD customclientraw.txt but > since the advent of direct WeeWX support and the WeeWX extension the > SteelSeries Weather Gauges support has been deprecated in WeeWX-WD). You > should find the WeeWX extension will work under WeeWX v4.x and python2 or > python3. > > > > I would suggest that you upgrade to WeeWX v4.4.0 and get WeeWX running to > your satisfaction before installing either WeeWX-WD v2.1.2 or the WeeWX > SteelSeries Weather Gauges extension (in whatever order suits). Once you > have the SteelSeries Weather Gauges extension running OK you can, if you > want, look at installing the Realtime gauge-data extension > <https://github.com/gjr80/weewx-realtime_gauge-data> which will allow the > gauges to update on every loop packet rather than on each report cycle (how > often they will update will depend on how often your station emits loop > packets, for your Rainwise this should be up to every couple of seconds). > > > > Gary > > > > On Sunday, 31 January 2021 at 13:15:24 UTC+10 tim lambert wrote: > > Gang, > > > > Currently running weewx 4.2 (will be upgrading in the next few days to > 4.4) on a Raspberry Pi 4 (32-bit OS) with a Rainwise MK-III and IP-100 > providing station data -- everything has been working properly for several > weeks and is populating a remote MySQL DB. > > > > Once I upgrade weewx, I'd like to incorporate using Steel Gauges and > Saratoga Templates, hence my query: Can I utilize the WEEWX-WD as outlined > BitBucket > Weewx-WD <https://bitbucket.org/ozgreg/weewx-wd/wiki/Users%20Guide>? > > > > The Steel Gauges and Saratoga Templates will be hosted on a remote, public > accessible server -- so I'll be sending the clientraw and testtag files via > FTP. > > > > Thanks in Advance! > > > > - Tim > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/gvReyZeqOJQ/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > weewx-user+...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/6942d0aa-94bf-46e9-bb56-8232a425f95fn%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/6942d0aa-94bf-46e9-bb56-8232a425f95fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c85c1908-0a23-4354-a0d0-8137c5c6ea57n%40googlegroups.com.
