During a AWS outage a few months back, my WLL failed to update WeeWX.
Nothing wrong with the WLL, my Internet, WeeWX. It seemed to depend on the
Internet though I only was looking for local data.
It's my understanding that the WLL does have a logger function, saves data
until it can be transmit
Thank you for looking in to this. I will ask NeoWX.
Op dinsdag 16 maart 2021 om 20:23:12 UTC+1 schreef kk44...@gmail.com:
> What I see from you link is that you are using NeoWX skin. I looked into
> the Github repository of NeoWX, especially into skin.conf, and found out,
> that this skin does
What I see from you link is that you are using NeoWX skin. I looked into
the Github repository of NeoWX, especially into skin.conf, and found out,
that this skin does not use WeeWX's image generator but some other plot
generator. Unfortunately I do not know how that generator works. So I can
on
Round 12 hours i did the same exercise i.e. have WLL and RPI on a switch
and then take away the internet for more then an hour. On my website the
holes of the time without internet are not filled later on as you can see
here: https://bit.ly/3vuDmDT
Op dinsdag 16 maart 2021 om 17:14:32 UTC+1 sc
The log says
Mar 16 15:48:16 raspberrypi weewx[527] INFO weewx.manager: Added record
2021-03-16 15:48:00 CET (1615906080) to database 'weewx.sdb'
Mar 16 15:48:16 raspberrypi weewx[527] INFO weewx.manager: Added record
2021-03-16 15:48:00 CET (1615906080) to daily summary in 'weewx.sdb'
That mea
I have a switch which connects WLL and RPI. In the log you can see it
continously adds current records. And they are published with FTP. But it
stops when take of the internetcable from the switch. But afterwards the
data is not updated. Here is the log (from starting up the RPI). I removed
the
I think i do not get IPv6 from my provider. Can not find it in the router,
but that's what i recall.
If i (deliberately) turn the router off , the network is gone (as i can
see when i scan with advanced ip scanner on my desktop pc which is in the
same switch).
Op maandag 15 maart 2021
No.
The router *may* shut down the internal network if the Internet is down.
And IPv6, even if not used, can cause such behavior. That is, because IPv6
receives an address from the internet and derived from that address it
gives addresses to the clients. Those addresses become invalid immediat
If the internet is available, it works like it should. Does that not mean
that this is probably not a network issue?
Op maandag 15 maart 2021 om 16:01:48 UTC+1 schreef Artvd:
> i am not sure about which device issues the ip-address , but i know they
> stay the same also after internet interrupt
i am not sure about which device issues the ip-address , but i know they
stay the same also after internet interruption (by using advanced ip
scanner). I have IPv4.
Op maandag 15 maart 2021 om 15:52:42 UTC+1 schreef kk44...@gmail.com:
> Which device provides the IP addresses? Or are they manua
Which device provides the IP addresses? Or are they manually set? Do you
use UPv4 or IPv6?
The router may revoke the IP address leases if Internet is down. That is
especially possible if you use IPv6.
Artvd schrieb am Montag, 15. März 2021 um 15:46:38 UTC+1:
> The WLL and a RPI Weewx computer
The WLL and a RPI Weewx computer are on the same switch which goes to the
internet router
Op maandag 15 maart 2021 om 15:25:24 UTC+1 schreef kk44...@gmail.com:
> So that sounds like a network issue. Could you provide a layout of your
> network including WLL, the WeeWX computer, the Internet rou
So that sounds like a network issue. Could you provide a layout of your
network including WLL, the WeeWX computer, the Internet router, and may be
the switch?
Artvd schrieb am Montag, 15. März 2021 um 15:01:24 UTC+1:
> I thought so too but i don't get that working.
> By the way I also don't w
I thought so too but i don't get that working.
By the way I also don't want the incur additional cost on top of the
purchase price for the equipment.
Op maandag 15 maart 2021 om 14:55:38 UTC+1 schreef kk44...@gmail.com:
> I had a discussion with Davis when I bought the device, and they state
I had a discussion with Davis when I bought the device, and they stated
that they require to use it with their cloud. The target is to get you into
their subscription plans. And if you do so you can download all the data
stored within the device. And if you don't do so (like me) ... they don't
15 matches
Mail list logo
