I'm still having ROM errors after checking all of those switches and
removing the SLI cable? I also have occasional issues where when I try to
suspend the computer just immediately wakes back up, failing to reset the
card. I'm assuming something is holding the computer back from powering
down. It's
Yeah those are my findings as well, I'm passing through the card in the
second slot. I'll remove my SLI cable and reply after I've tested it.
On Feb 23, 2016 4:37 PM, "vfio" wrote:
> Ah, interesting. I started by trying virtio 0.1.102 (stable), but this
> does not appear to support Windows 10 yet
Ah, interesting. I started by trying virtio 0.1.102 (stable), but this
does not appear to support Windows 10 yet. When using virtio 0.1.112
(latest), I experienced the freezing issues. After that, I simply
stopped using virtio and this allowed Windows to install. I did not
benchmark performance
I found the dip switches and they're all on. Damn. Although I've just
realized I still have an SLI cable on the cards. There's a good chance
that's causing some of my errors with the cards claiming each other...
On Feb 23, 2016 4:21 PM, "Ben J" wrote:
> I wasn't even aware of those PCI switches.
I wasn't even aware of those PCI switches. I'll look into it. To be clear,
if I'm only passing through the card in the second slot, I shouldn't have
any issues? What do those switches look like and where are they?
I fixed my IO for the most part by switching over to a raw partition on my
SSD and i
I have been experiencing the precise symptoms that you describe in this
thread and your previous thread. I have resolved the issue of the card
not resetting after running the VM once, but I have not investigated the
I/O issues yet. Have you since identified the issue with I/O?
I thought I shou
Hi, I got some help here a while ago on passing through one of my GTX
580's, since then I've made a lot of progress.
My setup:
Processor: I7-3960X
Graphics: 2 NVIDIA GTX 580's
RAM: Corsair Dominator GT, 16 GB, 1866 MHz
Monitors: 1 Monitor hooked up to the host 580, 1 monitor hooked up to both
580'
