Hello,
I achieved to compile the dvbs2 patched vdr1.5.13, but I can't get an
image from the S2-3200.
The S2-3200 is connected to an 19.2° oriented dish and the nexus to a 13°.
On the nexus I have an image, on the S2 a black screen.
This is what I can see in syslog regarding vdr :
Jan 27 09:16:44
Sebastian Dellit wrote:
> The options for the control plugin are correct but the
>
Are you sure? The control plug-in must be configured to use the same tty
as VDR.
See the KEYB_TTY setting in /etc/default/vdr and the -t option in
/etc/vdr/plugins/plugin.control.conf.
Tobias
_
On 01/27/08 08:11, Simon Baxter wrote:
> Hi
>
> I'm running vdr-1.5.12 with a TT-1500-C card, CI and alphacrypt multi-cam.
> All channels are encrypted.
>
> Intermittantly I try and switch to a channel and I get a "Channel not
> available" message. After switching back and forth between channe
Hi,
[EMAIL PROTECTED] schrieb:
> I achieved to compile the dvbs2 patched vdr1.5.13, but I can't get an
> image from the S2-3200.
> The S2-3200 is connected to an 19.2° oriented dish and the nexus to a 13°.
> On the nexus I have an image, on the S2 a black screen.
Looks like this is OK, see below
Hello Tobi and all readers,
on Sunday, January 27, 2008 at 2:09:30 PM means Tobi:
> Sebastian Dellit wrote:
>> The options for the control plugin are correct but the
>>
> Are you sure? The control plug-in must be configured to use the same tty
> as VDR.
> See the KEYB_TTY setting in /etc/defau
Hi,
[EMAIL PROTECTED] schrieb:
> I achieved to compile the dvbs2 patched vdr1.5.13, but I can't get an
> image from the S2-3200.
> The S2-3200 is connected to an 19.2° oriented dish and the nexus to a 13°.
> On the nexus I have an image, on the S2 a black screen.
Looks like this is OK, see belo
Hi,
serge pecher schrieb:
>> Jan 27 09:17:32 pccave vdr: [13657] switching to channel 1
>> Jan 27 09:17:32 pccave vdr: [13662] set DVB-S
>> Jan 27 09:17:41 pccave vdr: [13662] frontend 0 timed out while tuning to
>> channel 1, tp 110832
>
> This one looks OK too. DVB-S channels shall be tuned o
VDR developer version 1.5.14 is now available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.14.tar.bz2
A 'diff' against the previous developer version is available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.13-1.5.14.diff
WARNING:
This is a *developer* version. Even though
Klaus Schmidinger wrote:
> - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald Nissl
> for a patch that was used to implement this). VDR now requires the
> "multiproto"
> DVB driver, e.g. from http://jusst.de/hg/multiproto.
Would it be possible to make that optional via c
> I guess so, but I'm not going to ;-)
> This new driver appears to be stable enough now - at least I've
> been using it for a few days now without problems.
>
The new driver is fine, but what you might find is that new card and
features being released into the stock v4l mercurial tree aren't bein
Klaus Schmidinger wrote:
> On 01/27/08 16:25, Ludwig Nussel wrote:
> > Klaus Schmidinger wrote:
> >> - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
> >> Nissl
> >> for a patch that was used to implement this). VDR now requires the
> >> "multiproto"
> >> DVB driver, e
On 01/27/08 16:44, Morfsta wrote:
>> I guess so, but I'm not going to ;-)
>> This new driver appears to be stable enough now - at least I've
>> been using it for a few days now without problems.
>>
>
> The new driver is fine, but what you might find is that new card and
> features being released i
On 01/27/08 16:54, Ludwig Nussel wrote:
> Klaus Schmidinger wrote:
>> On 01/27/08 16:25, Ludwig Nussel wrote:
>>> Klaus Schmidinger wrote:
- Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
Nissl
for a patch that was used to implement this). VDR now requires
On 01/27/08 16:25, Ludwig Nussel wrote:
> Klaus Schmidinger wrote:
>> - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
>> Nissl
>> for a patch that was used to implement this). VDR now requires the
>> "multiproto"
>> DVB driver, e.g. from http://jusst.de/hg/multiproto.
Klaus Schmidinger wrote:
> On 01/27/08 16:54, Ludwig Nussel wrote:
> > Klaus Schmidinger wrote:
> >> On 01/27/08 16:25, Ludwig Nussel wrote:
> >>> Klaus Schmidinger wrote:
> - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
> Nissl
> for a patch that was use
* Ludwig Nussel schrieb am 27.01.08, um 17:35 Uhr:
> Works fine now, breaks tomorrow. We had the dvb kernel module
> package long enough and I was so glad when the dvb drivers finally
> went into the upstream kernel. I'm not going to maintain another
> kernel module package again.
The same applies
Thomas Schmidt wrote:
...
> In the current state, it would not be possible for Debian to ship a
> vdr version > 1.5.13 in the official archive.
But that's acceptable, considering that VDR 1.5.14 is a developer version,
not a stable version which is intended to go into a distribution, right?
Lets
On 01/27/08 17:46, Thomas Schmidt wrote:
> * Ludwig Nussel schrieb am 27.01.08, um 17:35 Uhr:
>> Works fine now, breaks tomorrow. We had the dvb kernel module
>> package long enough and I was so glad when the dvb drivers finally
>> went into the upstream kernel. I'm not going to maintain another
>>
On 28 Jan 2008 Klaus Schmidinger <[EMAIL PROTECTED]> wrote:
> On 01/27/08 16:25, Ludwig Nussel wrote:
>> Klaus Schmidinger wrote:
>>> - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
>>> Nissl
>>> for a patch that was used to implement this). VDR now requires the
>>> "mu
* Carsten Koch schrieb am 27.01.08, um 17:56 Uhr:
> > In the current state, it would not be possible for Debian to ship a
> > vdr version > 1.5.13 in the official archive.
>
> But that's acceptable, considering that VDR 1.5.14 is a developer version,
> not a stable version which is intended to go
Klaus Schmidinger wrote:
> On 01/27/08 17:46, Thomas Schmidt wrote:
> > I really hope that either vdr 1.5.x gets a compile-time-switch to
> > build and run with the vanilla kernel-sources or even better that the
> > multiproto-drivers will be merged into the mainline kernel soon.
>
> The latter wo
This patch implements support for HVR4000(lite) into the multiproto tree. It
is an update of my patch from 2007-12-15. In contrast to the previous one
it should conform better to the multiproto API and supports the "set_params"
call.
For compatibility to non-multiproto-aware applications like v
>> Intermittantly I try and switch to a channel and I get a "Channel not
>> available" message. After switching back and forth between channels,
>> finally the channel will select, and everything's ok.
> Maybe your CAM needs longer than TS_SCRAMBLING_TIMEOUT (default is 3
> seconds)
> to start de
Here is an update for the update, as the last had to suffer a small hg
accident.
Regards,
Holger
multiproto-hvr4k-2008-01-27b.patch.bz2
Description: BZip2 compressed data
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/li
On Sun, 27 Jan 2008 16:58:26 +0100
Klaus Schmidinger <[EMAIL PROTECTED]> wrote:
> I don't know. I just grab the latest driver from http://jusst.de/hg/multiproto
> and compile it on my SUSE 10.3 system, running the stock SUSE kernel.
> So just unload all DVB modules that come with the stock kernel
On Sun, Jan 27, 2008 at 08:32:53PM +0100, Malte Schröder wrote:
> Well, multiproto doesn't even compile on a current (2.6.24) kernel ..
> or I am doing something really wrong.
Well, the VDR community is quiete large, then we'll could make things go
to a better situation, from my point of view, we
Hi list,
Asking myself if I want to build kernels and drivers for 4 different PCs
or try my luck with an old DVB API patch for vdr-1.5.14, I've chosen the
latter. The attached patch implements fallback for VDR in case no
multiproto DVB driver headers are available.
I'm not really sure what
On 28 Jan 2008 Udo Richter <[EMAIL PROTECTED]> wrote:
> Asking myself if I want to build kernels and drivers for 4 different PCs
> or try my luck with an old DVB API patch for vdr-1.5.14, I've chosen the
> latter. The attached patch implements fallback for VDR in case no
> multiproto DVB driver
Hello,
When I run vdr from the command line I get this message:
"vdr: please turn off UTF-8 before starting VDR"
How do I turn off UTF-8? Why would I want to?
Can someone tell me how to fix it?
I have just installed it using YUM rpm, and I am running Fedora 7 if that
helps.
Any help is appre
Hi,
attached you'll find an updated patch for VDR-1.5.14.
This time, the VPID offset 1 stuff has been removed completely.
Have a look at this page for more instructions on this concern:
http://www.vdr-wiki.de/wiki/index.php/OpenSuSE_DVB-S2_-_Step_by_Step_Installationsanleitung_%28Achtung_Be
On Tue, 15 Jan 2008, Sebastian Dellit wrote:
> I hope my idea is simple. many Any users use a braille display and
> speech to access the vdr. Is it possible to create a femon skin which
> show the information in plain text on the OSD? E. g. the developer of
> the lastfm-plugin has include a functi
Morfsta wrote:
>> I guess so, but I'm not going to ;-)
>> This new driver appears to be stable enough now - at least I've
>> been using it for a few days now without problems.
>>
>
> The new driver is fine, but what you might find is that new card and
> features being released into the stock v4l m
Ludwig Nussel wrote:
> Klaus Schmidinger wrote:
>> On 01/27/08 16:25, Ludwig Nussel wrote:
>>> Klaus Schmidinger wrote:
- Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
Nissl
for a patch that was used to implement this). VDR now requires the
"multipro
Klaus Schmidinger wrote:
> On 01/27/08 17:46, Thomas Schmidt wrote:
>> I really hope that either vdr 1.5.x gets a compile-time-switch to
>> build and run with the vanilla kernel-sources or even better that the
>> multiproto-drivers will be merged into the mainline kernel soon.
>
> The latter would
On Jan 27, 2008 9:03 AM, Stefan Huelswitt <[EMAIL PROTECTED]> wrote:
> I don't know if there are many people left, but I'm still working
> with a 2.4.x kernel and cannot use the new drivers (neither HG
> nor multiproto).
> This way I'm effectively looked out from VDR...
>
> I would really appreciat
On Sun, Jan 27 2008, techno wrote:
>
> When I run vdr from the command line I get this message:
>
> "vdr: please turn off UTF-8 before starting VDR"
>
> How do I turn off UTF-8?
Hello,
With the command "set | grep -i utf" you can see what environment variables
have a value with "utf". Those, th
On Sunday 27 January 2008, techno wrote:
> Hello,
>
> When I run vdr from the command line I get this message:
>
> "vdr: please turn off UTF-8 before starting VDR"
>
> How do I turn off UTF-8? Why would I want to?
> Can someone tell me how to fix it?
>
> I have just installed it using YUM rpm, and
Manu Abraham wrote:
> Ludwig Nussel wrote:
> > Klaus Schmidinger wrote:
> >> On 01/27/08 16:25, Ludwig Nussel wrote:
> >>> Klaus Schmidinger wrote:
> - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhald
> Nissl
> for a patch that was used to implement this). VD
38 matches
Mail list logo
