Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

In message <20090909185925.ga24...@roja.toh.cx>, Thomas Hilber wrote On Tue, Sep 08, 2009 at 11:08:39PM +0100, dave cunningham wrote: Same behaviour with your xorg.conf unfortunately. I've heard there are some buggy intel-DDXes floating around. I don't know which one you use. A possible worka

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Tue, Sep 08, 2009 at 11:08:39PM +0100, dave cunningham wrote: > Same behaviour with your xorg.conf unfortunately. I've heard there are some buggy intel-DDXes floating around. I don't know which one you use. A possible workaround is do add SubSection "Display" Virtual

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

In message <20090908042705.gh6...@roja.toh.cx>, Thomas Hilber wrote >> The desktop's working just fine but I'm having problems with XV. When >> running in a window xv's fine however when I switch to full screen all I >> get is a blue screen + audio. > >probably a xorg.conf configuration issue. Did

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Tue, Sep 08, 2009 at 12:16:30AM +0100, dave cunningham wrote: > I've finally tried to get this up and running with the patched Intel > xserver on a D945GCLF2 atom board (I see from your readme that you've > tried this configuration so assume it should work). right, works very well > The de

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

In message , dave cunningham wrote Looking for some help again :( I've finally tried to get this up and running with the patched Intel xserver on a D945GCLF2 atom board (I see from your readme that you've tried this configuration so assume it should work). (Note I'm using MPlayer right no

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

In message <20090827195633.ga3...@roja.toh.cx>, Thomas Hilber wrote ATI cards do have a major drawback compared to Intel cards: They can't scale vertically in interlaced mode because they can't scale both fields independently. So your TV must handle format adaptions. Looking for some help ag

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

In message <20090827195633.ga3...@roja.toh.cx>, Thomas Hilber wrote On Thu, Aug 27, 2009 at 10:44:59AM +0100, dave cunningham wrote: In fact I use the cable from here with the cut off circuit so I'd actually have to build a new cable to use t

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Thu, Aug 27, 2009 at 10:44:59AM +0100, dave cunningham wrote: > Do standard CRTs handle this increased resolution/clock? I've never tried > driving this signal into my TV. I haven't experienced any problems even with very old TVs caused by the higher video signal bandwidth. > In fact I use the

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Thu, Aug 27, 2009 at 10:53:55AM +0200, Thomas Hilber wrote: > On Thu, Aug 27, 2009 at 11:14:22AM +0300, Pasi Kärkkäinen wrote: > > Hmm.. why without? FRC doesn't work on Intel @ 720x576i ? > > 720x576i and 1440x576i are both SCART/PAL resolutions with a > line frequency of 15.625kHz. > VGA2SCAR

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

Thomas Hilber wrote: > The 1440x576i is driven at doubled dot clock. So it effectively represents > a regular 720x576i PAL timing too. The reason for 1440x576i is: the FRC > gains doubled horizontal timing resolution. As a result variable frame > rate can be controlled in finer (twice as much)

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Thu, Aug 27, 2009 at 11:14:22AM +0300, Pasi Kärkkäinen wrote: > Hmm.. why without? FRC doesn't work on Intel @ 720x576i ? 720x576i and 1440x576i are both SCART/PAL resolutions with a line frequency of 15.625kHz. VGA2SCART+FRC on Intel requires 1440x576i. VGA2SCART+FRC on ATI also runs directly

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Thu, Aug 27, 2009 at 03:04:04AM +0200, Thomas Hilber wrote: > On Wed, Aug 26, 2009 at 03:40:25PM +0100, dave cunningham wrote: > > If I'm reading the patches correctly it seems that the ATI chips can > > currently do 720x576 only, where the Intel chips can be configured for > > 1440x576 and 1600

Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

On Wed, Aug 26, 2009 at 03:40:25PM +0100, dave cunningham wrote: > If I'm reading the patches correctly it seems that the ATI chips can > currently do 720x576 only, where the Intel chips can be configured for > 1440x576 and 1600x1200 only. for VGA2SCART (without FRC) Intel chips can be setup for 7