Re: [vdr] FRC - RGB/Scart with the Intel 830 driver

[dave cunningham]

In message <20090909185925.ga24...@roja.toh.cx>, Thomas Hilber wrote

On Tue, Sep 08, 2009 at 11:08:39PM +0100, dave cunningham wrote:

Same behaviour with your xorg.conf unfortunately.

I've heard there are some buggy intel-DDXes floating around.
I don't know which one you use. A possible workaround is
do add

        SubSection "Display"
            Virtual    3200 1200
        EndSubSection

to the "Screen" section. Attached is a further 'xorg.conf'
with the workaround included. Please give it a try.

I added this section but it didn't make any difference.




--
Dave Cunningham                                  dave at upsilon org uk
                                                 PGP KEY ID: 0xA78636DC

I have now fixed it though by adding a new monitor for VGA-1 and setting "Ignore" to "true" in xorg.conf. Thanks again for the help (wouldn't have found this if I hadn't started looking into Clone as you mentioned earlier in the thread!)

xorg.conf
Description: xorg.conf

_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr