om: vdr-boun...@linuxtv.org [mailto:vdr-boun...@linuxtv.org] On Behalf Of
Steffen Barszus
Sent: Wednesday, 18 January 2012 5:47 PM
To: vdr@linuxtv.org
Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23
On Wed, 18 Jan 2012 09:58:16 +1100
"Hawes, Mark" wrote:
> Hi,
>
>
uary 2012 5:47 PM
To: vdr@linuxtv.org
Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23
On Wed, 18 Jan 2012 09:58:16 +1100
"Hawes, Mark" wrote:
> Hi,
>
> I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T
> frontends on one adapter ) against 1.7.23 and a new s
Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one
adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday.
DVB-S channels work fine. However, any attempt to select a DVB-T channel
results in "channel not available".
The Syslog trace during VDR
Hi Lars,
I have got the sc plugin working with your hybrid patch v2 and
introduced the premium card and all is working well.
Are you planning any more revisions to the patch? Or at least a 1.7.22
version?
Thanks,
Mark.
-Original Message-
From: Hawes, Mark
Sent: Thursday, 1 December 2011
Hi Lars,
First reports on v2 of your multi-frontend patch with HVR 4000 card:
- can switch between both frontends successfully and very stable with
repetitive tests
- timer behaviour as expected
- switching response seems quicker than before
- Streamdev and xineliboutput plugins compile OK
My apologies - the dvbhddevice and dvbsddevice plugins are OK, I was
using versions I copied across and were unpatched.
Mark.
-Original Message-
From: Hawes, Mark
Sent: Friday, 18 November 2011 5:54 PM
To: 'VDR Mailing List'
Subject: RE: [vdr] VDR and Hybrid DVB Cards ( was
k.
-Original Message-
From: vdr-boun...@linuxtv.org [mailto:vdr-boun...@linuxtv.org] On Behalf
Of L. Hanisch
Sent: Friday, 18 November 2011 4:44 AM
To: vdr@linuxtv.org
Subject: Re: [vdr] VDR and Hybrid DVB Cards ( was "HVR 4000 drivers
broken - adapter0/frontend1 busy" in linux-medi
Hi Lars,
Thanks for the patch.
Basically, it seems to work for the HVR 4000. Both front ends are
detected successfully, and both can be used. I'm using it with the
xineliboutput plugin and it seems to co-exist OK.
Starting a recording on one prevents a channel switch to the other with
the "Chann
media list )
>Am 15.11.2011 11:52, schrieb Steffen Barszus:
>> 2011/11/15 Hawes, Mark:
>>>> What i got from previous discussions on linux-media is, that if the
>>>> device nodes are created within one adapter, an application needs
to
>>>> assume tha
On Tue, 15 Nov 2011 14:08:24 +1100
"Hawes, Mark" wrote:
>> Lars,
>>
>> Thanks for the reply.
>>
>> Output of ls -la /dev/dvb/adapter0:
>>
>> root@Nutrigrain:/home/digitalTV/vdr-1.7.21# ls -la
/dev/dvb/adapter0/*
>> crw-rw 1 root
ia-ow...@vger.kernel.org
[mailto:linux-media-ow...@vger.kernel.org] On Behalf Of L. Hanisch
Sent: Tuesday, 15 November 2011 5:35 AM
To: linux-me...@vger.kernel.org
Subject: Re: HVR 4000 drivers broken - adapter0/frontend1 busy
Hi,
Am 14.11.2011 04:14, schrieb Hawes, Mark:
> Hi,
>
> I have j
VDR1.7.19
Am 25.07.2011 13:12, schrieb Hawes, Mark:
> I've done some further investigation and as far as I can tell the
> problem appears to be with the value returned by cDiseqc::Codes in
> diseqc.c.
>
> The following trace from 1.7.19 shows the problem:
>
> Receiv
I've done some further investigation and as far as I can tell the
problem appears to be with the value returned by cDiseqc::Codes in
diseqc.c.
The return value changed from 'uchar' to 'const uchar' between 1.7.18
and 1.7.19 and the returned value now always points to the last diseqc
code in the st
Just looked at the trace I sent in my initial post and realised that I
had selected a Diseqc command that I had modified while trying to
diagnose the situation so my annotations < > were a bit misleading.
The following should be less confusing:
Diseqc command list found = t v [E0 10 38 F4] W500
Hi,
Since upgrading to VDR 1.7.19 I have experienced problems with Diseqc.
My diseqc configuration uses command strings which contain 3 code sets:
a diseqc switch command, a diseqc go to command, and a repeat goto
command.
Since upgrading to VDR 1.7.19 it appears that the only code set
I'm have been using a Technotrend FF sat card on 1.7.16 without a
problem.
Check you are using the latest firmware.
MD.
> I upgraded my VDr system from 1.6.0 to 1.7.16. After upgrade, I found
that my
> FF card (fujitsu-siemens dvb-c) crashes almost every time when I exit
from a
> recording pla
>>> One question (OT): is it normal that replaying a PES record causes
>>> in a very high CPU load on 1.7.2 and higher? -> 80-90% on a P4/2400
>>>
>>> Replaying TS produces "no" CPU load.
>>
>> Forget it! This seems to be fixed too since your patch.
>>
>> Could that be possible?
>I don't think s
>> A TS recording is only marginally more data than the same length recording
>> in PES. I don't think that recording in TS should require so much more
>> bandwidth
>> than PES.
>That's clear to me.
>> There must be an other problem that's causing this, but since this doesn't
>> happen here on m
If I pause live video then restart it starts in slo-mo i.e. judders, and
>> then eventually freezes, but may then start again, still juddering
>> and freezing ...
>
> Well, then I have no idea why it wouldn't work with an NTFS partition,
> while it does work with others.
>
> Klaus
> Hi
On 20.03.2009 13:11, Hawes, Mark wrote:
> Since upgrading to VDR-1.7.4 I have experienced some instability when
> recording to an NTFS partition.
>
>
>
> The recording itself seems to proceed OK, but the recorded programs
will
> generally only play for a few seconds bef
Hi,
Since upgrading to VDR-1.7.4 I have experienced some instability when
recording to an NTFS partition.
The recording itself seems to proceed OK, but the recorded programs will
generally only play for a few seconds before freezing. Pausing live
video and then resuming play will also trigg
>> The MG 800 successfully plays streamed content from the internet,
>> but has problems with a stream from the streamdev server.
>> The URL I am using from the player is identical to one that
>> mplayer can play, e.g. 'http://192.168.0.4:3000/1'.
>PCH is not very good on recognizing media fo
Hi,
I am trying to stream from VDR to my Mediagate 800 Network Media Player
using the Streamdev Server plugin.
The MG 800 successfully plays streamed content from the internet, but
has problems with a stream from the streamdev server.
The URL I am using from the player is identical to
Hi,
I am using the iptv plugin to view NASA TV. I now have a good picture,
but the audio is broken. All I get is a series of squeals and pops,
nothing listenable.
Anyone have any Ideas?
Thanks,
Mark Hawes
This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is
confide
Timothy,
The channels.conf entry I'm using is:
Nasa TV;IPTV:1:IPTV|S0P0|EXT|iptvstream.sh|1:P:0:2:3:0:0:1:0:0:0
The URL line in iptvstream.sh is:
URL=http://www.nasa.gov/55644main_NASATV_Windows.asx
WIDTH=352
HEIGHT=288
And I've added "width=${WIDTH},height=${HEIGHT}" to the t
Thanks Jan, 352x288 works well.
Next problem - the sound is not working, all I get is a series of
squeals and pops, nothing listenable. I thought it might be the
processor overloaded again but that's running at about 60% of a 1Ghz
processor most of which is probably transcode load. I would have
Hi,
I'm using iptv 0.2.1 with vdr 0.1.7 to view NASA TV on a technotrend ff card.
The displayed picture occupies only the top left ΒΌ of the screen. My objective
is to get it full screen.
I have tried scaling it in the iptvscreen.sh script in the vlc call but this
asks too much of the
Hi,
I am trying to use SC version 8.7 to decrypt an Irdeto 1 stream using a
valid set of card credentials. I have placed these credentials in my
IRD-BETA.KID file using the format specified in the examples.
Specifically for the provider ID field I have used the value "10".
However, SC does not s
I am looking for a plugin to play steaming video from the net, and
specifically at the moment NASA TV. I have the MP3/Mplayer plugin
installed, and also played with the VOD plugin about a year ago, but
still can't work out how to achieve what I want. Any help would be much
appreciated.
This i
29 matches
Mail list logo
