Hi,
i have been using RFNoC for quite some time and am now starting a new
project based on UHD4.5. in the past i used rfnocmodtool which was very
useful but i can see that in gnuradio 3.10 gr-ettus is not required anymore
but at the same time there's no replacement for rfnocmodtool, at least that
i
AM
To: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] rfnocmodtool Problem
Sorry for the slight typo, I meant
$ apt install python-future
Best regards,
Arne
Fra: Løken, Arne Magnus Tveita
Sendt: torsdag 19. mars 2020 10:01
Til: 'usrp-users@lists.ettus.com'
Emne: Re: [
Sorry for the slight typo, I meant
$ apt install python-future
Best regards,
Arne
Fra: Løken, Arne Magnus Tveita
Sendt: torsdag 19. mars 2020 10:01
Til: 'usrp-users@lists.ettus.com'
Emne: Re: [USRP-users] rfnocmodtool Problem
Hi Jeff,
As far as I can tell, this is not an issue
Hi Jeff,
As far as I can tell, this is not an issue with RFNoC; you simply seem to be
missing (at least one) Python module. If you're on Ubuntu, try the following:
$ apt install pyhon-future
Best regards,
Arne
___
USRP-users mailing list
USRP-users@l
r-ettus which is too new? Just trying to narrow my scope.
Jeff
From: USRP-users on behalf of Jeff S via
USRP-users
Sent: Wednesday, March 18, 2020 10:38 AM
To: usrp-users@lists.ettus.com
Subject: [USRP-users] rfnocmodtool Problem
I'm still going through
I'm still going through the "Getting Started with RFNoC Development" guide at
https://kb.ettus.com/Getting_Started_with_RFNoC_Development, and I am at the
rfnocmodtool section. I do the following command and get the error response:
$ which rfnocmodtool
/usr/local/bin/rfnocmodtool
$ rfnocmodto
Hello Peter,
thank you for noticing this. We will take care of this shortly.
- Nicolas
On Tue, May 8, 2018 at 10:57 AM, Peter Horvath via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hello,
>
> the clocking scheme has been recently changed, as of
> https://github.com/EttusResearch/fpga/com
Hello,
the clocking scheme has been recently changed, as of
https://github.com/EttusResearch/fpga/commit/89957c3f30d3e17ddd43622277cbec299b207805
But it seems that the rfnocmodtool Verilog template did not receive the
required changes, i.e., it leaves bus_clk and reset unconnected on the
axi_wrap
Hi,
I am trying to test a custom block built using rfnocmodtool and I get
this error when I run make noc_block__tb
*Setting up a 64-bit FPGA build environment for the USRP-X3x0...*
*- Vivado: Found (/opt/Xilinx/Vivado/2015.4/bin)*
*- Vivado HLS: Found (/opt/Xilinx/Vivado_HLS/2015.4/bin)*
*Env
