On 06/07/2018 12:53 PM, Kenneth Collier via USRP-users wrote:
I've attached a diagram of my setup. I have not been able to measure
the power output of my signal. I'm using the tx waveform example
included with UHD with a gain of 20dB and a waveform amplitude of 0.3.
I'm not sure what the Rx gai
On 06/07/2018 10:03 AM, Kenneth Collier via USRP-users wrote:
Hello All,
I have an X310/WBX-120 transmitting a 500kHz tone @ 1.6GHz through a
power divider to RF A Rx and RF B Rx on an X310/SBX-120. The 10MHz
reference for both devices is sourced from an Octoclock-G using its
internal referen
What is the Tx gain of your WBX?
What is the Rx gain of your SBX?
What is the power your signal is going out at in dbm?
Assuming:
10MHz reference and 1PPS cables are all same length.
Both USRPs have been recently calibrated with utilities.
Splitters change phase, although I am not sure that
Hello All,
I have an X310/WBX-120 transmitting a 500kHz tone @ 1.6GHz through a power
divider to RF A Rx and RF B Rx on an X310/SBX-120. The 10MHz reference for
both devices is sourced from an Octoclock-G using its internal reference.
The PPS reference for both devices is also sourced from the Oct
