: [USRP-users] SFP+ to RJ45 Adapter
I just rered my post as well, and I should have been more clear.
The Thunderbolt adapter I have has an RJ45 connector (unfortunately)
https://www.cablematters.com/pc-1039-131-intel-certified-thunderbolt-3-to-10-gb-ethernet-adapter.aspx.
It is not one that I asked
Derek Steinkamp
> *Sent:* Tuesday, October 13, 2020 10:51 AM
> *To:* Jeff S
> *Subject:* Re: [USRP-users] SFP+ to RJ45 Adapter
>
> Just re-read your post. This is what you need (assuming your thunderbolt
> 10G adapter has an SFP+ port- if not see the QNAP product)
>
> [
eff S
Subject: Re: [USRP-users] SFP+ to RJ45 Adapter
Just re-read your post. This is what you need (assuming your thunderbolt 10G
adapter has an SFP+ port- if not see the QNAP product)
[Blue] Colored 10G SFP+ DAC Cable - Twinax SFP Cable for Ubiquiti Devices,
2-Meter(6.5ft)
https://www.amazon.c
Pretty much any SFP+ to RJ-45 adapter should work. I have had very good
success with some generics from Amazon as well as some from fs.com . Note
that if your 10 GbE adapter provides SFP+ (not RJ-45), then using a DAC
cable ("direct attach copper": SFP+ <-> SFP+, without the RJ-45 conversion)
is a
I use the “QNAP” branded one on amazon with a cheapo 2m active SFP cable
and it works just fine on my N300!
Derek
On Tue, Oct 13, 2020 at 10:43 AM Jeff S via USRP-users <
usrp-users@lists.ettus.com> wrote:
> I acquired a Thunderbolt 10 Gigabit adapter, and I was wondering if I
> could connect it
I acquired a Thunderbolt 10 Gigabit adapter, and I was wondering if I could
connect it to the SFP+ connector on my X310.
Has anyone done this? And, is there a particular SFP+ to RJ45 which works
well? All I see on the Ettus website is the recommendation for using the
terminated cable and PC n
