] C674 fail on B210 rev 4
Billy,
On Fri, Sep 22, 2017 at 8:23 PM, Billy Jones via USRP-users <
usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
snip
> I'm using Rev 4 of the B210, and I have a GPSDO-TCXO module installed. I
> was using a 9V, 1.5A wall wart
Robin,
Thank you for the info and the link - I hadn’t realized that the EDA files were
available publicly.
-Billy
From: Robin Coxe [mailto:robin.c...@ettus.com]
Sent: Friday, September 22, 2017 3:43 PM
To: Billy Jones
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] C674 fail on B210
Billy,
On Fri, Sep 22, 2017 at 8:23 PM, Billy Jones via USRP-users <
> usrp-users@lists.ettus.com> wrote:
> snip
> > I'm using Rev 4 of the B210, and I have a GPSDO-TCXO module installed. I
> > was using a 9V, 1.5A wall wart as the power supply and had the USB3 cable
> > connected to my PC.
> >
Hi Billy. C674 is Kemet T495C107K016ATE200
CAP,SM,100UF,16V,10%,TANTALUM,6032.
Schematics for the B210 are available here:
http://files.ettus.com/schematics/b200/b210.pdf
-Robin
On Fri, Sep 22, 2017 at 8:23 PM, Billy Jones via USRP-users <
usrp-users@lists.ettus.com> wrote:
> I have been usi
I have been using a B210 board for about a week now to run OpenBTS and
OpenBTS-UMTS. I left the board powered on in its enclosure overnight, and when
I arrived in the morning discovered it not working, the power led flickering,
and my computer alerting that there was a USB power surge. I took
